Search results

  1. petercro

    The Mini Juice Machine Mk 3

    After seeing the mahmba 2. The Mini Mk3 looked like a box toy. I removed all the pieces and hit it with a hammer. Went back to the drawing board. Talking to HighPing and MastiffMike, on how to work with plastic to form sleeker Mods, I came up with this. It is not finished as the unit has...
  2. petercro

    The Mini Juice Machine Mk 3

    Thank you for the heads up about the battery. The writing on the battery says it is protected. But any idiot with a wax crayon could have written it. I have contacted my supplier and am waiting for a reply. If I don't get a suitable answer I will dismantle one and if isn't protected. I will get...
  3. petercro

    Coil Winding Made Easy

    Nicotime. I know I'm a pain but as you are working on this concept and I'm not. Could a more absorbent wick be used inside a silica wick shell to increase draw speed. I know I don't want much, but it's worth asking the question. If you could get this to work, you would never have to pump a Juice...
  4. petercro

    My (very basic) 510 juicebox

    Your answer is correct, it was my question which was wrong. Doesn't the 510 battery connector have 4 air inlet holes while the 4081 battery connector only have two. Allowing more air to the atty from the sides rather than sucking up liquid from a full bottle.
  5. petercro

    Coil Winding Made Easy

    Great test. Question. Does the silica fibre act as a wick. If so could the test be repeated without the bottle of liquid, but instead standing the test tube up in a small dish of liquid, so it would wick itself and draw up all the liquid in the dish?
  6. petercro

    my dse pipe mods

    Really nice work Rebel Could you explain a little more of the conversion process, or post any pics you have? Elendil, Thanks for moving this thread here.... Petercro........
  7. petercro

    My (very basic) 510 juicebox

    So far it's not drawing on its own, which is what I was hoping for by making it a short strait shot. But I also have not filled the bottle yet. I wanted to make sure it wasn't going to bleed all over the place before I filled it up. Doesn't the 510 have 4 side holes while the 4081 have just 2...
  8. petercro

    My (very basic) 510 juicebox

    OH YES ( I would kill to be able to fab a case of that shape and standard). Yes solders like a dream (no curling). Great Idea not soldering brass tube in battery connector. (Its a pain in the .... to do. Peter............
  9. petercro

    My (very basic) 510 juicebox

    Saw a great design today, thanks to Mike. Hghping I have just put together the same bottle atty connection and I'm waiting for epoxy to dry. You can't get any more basic than your build. And I do like basic. The simplicity is great. How is the air flow on the 510, without the base air hole in...
  10. petercro

    The Mini Juice Machine Mk 3

    I was keeping the best to last. But you are too quick off the mark. The positive stud is connected via a reed switch, and the charging stand has a magnet within it. (Not built the stand yet but thats the plan). Link to microswitch Miniature Microswitch : Micro Switches : Maplin Link to...
  11. petercro

    The E-Pipe Juice Machine

    Kauai kai Stay safe. This thread is not winding up but it has taken a new direction. So I have decided to try and redirect it's redirection. To http://www.e-cigarette-forum.com/forum/modders-forum/74018-mini-juice-machine-mk-3-a.html I would like to keep this thread running and open for...
  12. petercro

    The Mini Juice Machine Mk 3

    Mini Juice Machine Mk3 Hello All. The http://www.e-cigarette-forum.com/forum/modders-forum/64983-e-pipe-juice-machine.html thread is not over, I think everybody who participated may use it as a reference thread. The Mini J M. Mk1 is at home with me working 24/7. The Mk2 has had problems with...
  13. petercro

    My homemade mini juicebox (the MrPuffer)

    If my ECF privileges are removed for 4 weeks. There will be no chance in hell of me taking the same route as Mr Puff. I like playing in the modders section too much!!!!!!!!!!!!!!!!!!!!!!!!!!
  14. petercro

    My homemade mini juicebox (the MrPuffer)

    Could somebody please explain to me why the ECF takes so long to update a user account to a supplier account. I don't get it. Mr Puff is a great modder who has produced a great mod and is prepared to sell this design on this forum. He doesn't own a large web based shop which is turning over...
  15. petercro

    The E-Pipe Juice Machine

    I had no intention of building an actual charger just the stand. Basically as I own an 18650 charger, I thought of using a fake battery placed into the charger with two wires running to the stand socket. (Quick, Simple and above all cheap). I should as you say make the stand have a usb...
  16. petercro

    The E-Pipe Juice Machine

    Hello Again The Mini juice machine is at present 1 x 2 x 3" approx. I have found a way of fitting everything within, but reducing its width from 2" to 1.5" But that will have to be the Mk4 as the project box will have to be made. Back to the Mk3. New Additions. 1. Even though I only...
  17. petercro

    My homemade mini juicebox (the MrPuffer)

    Scottbee Thanks for the info. I'm working away and the dam hotel's wifi died last night, just got back online now. I will check out the fet's. Thanks again for the links. Petercro.
  18. petercro

    My homemade mini juicebox (the MrPuffer)

    Yes Please!!!!!!!!!!!!!!!!!!!!!!! The smaller the better. Q. What would be the load rating?
  19. petercro

    My homemade mini juicebox (the MrPuffer)

    Not that I have found, as yet. If I wanted to make a mod the size of the JB. It would not be a problem. (Lots of room inside). But like MrPuff his mod is quite short of space and adding a relay would reduce battery or bottle size.
  20. petercro

    My homemade mini juicebox (the MrPuffer)

    The switches at MadVapes look great (ones used by Darchand). The only problem is the rating (50mA) I have been trying to find a way to use these 50mA switches with a higher current. Maplins UK do sell a relay which would work but it still takes 10 X 10 X 8mm, box space. As you nor I are 5v...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu