Search results

  1. Zurd

    Bench Test Results: Molicel M35A - 10A 3450mAh 18650...great performer, about equal to NCR18650GA

    Awesome! Timing couldn't be more perfect as I need new batteries, my Samsung INR18650-25R needs to be changed, had them for 1.8 years. Just bought 11 Molicel, first time I'm buying 18650 at a cheap price like this. Thank you very much Mooch! :)
  2. Zurd

    beauty ring as a catch cup

    mimoschen: I use an IGO-L, i like it so much that I bought 15 of them. They don't make them anymore. SKU 1400500 on FT. LoveVanilla: I don't understand how a rubber o-ring can extend to make an electric connection?! I'm missing something here. AngeNZ: awesome, I will order those, just what I...
  3. Zurd

    beauty ring as a catch cup

    All good points mimoschen but like I said, it leaks very rarely, like once a week, it's not much of a problem. Only sometimes I vape and the air hole is pointing at the ground so it can leak a bit, it's just a small lack of attention on my side. A catch cup would just be a nice addition in those...
  4. Zurd

    beauty ring as a catch cup

    I saw somewhere on this forum that you can use a beauty ring as a catch cup for RDA, so I bought those: Deck Beauty Ring for Entheon RDA Atomizer (5-Pack): FastTech Forums Problem is that my atomizer doesn't screw completely and my vaporizer doesn't detect the atomizer so it doesn't work. I...
  5. Zurd

    Drip tip falling - Best way to tighten/glue them?

    For sure my atomizer heats and vaporizes the liquid eheh what I meant is, the outside top where the glue is will never reach a temperature high enough to vaporize the glue or even liquify it. Indeed, I would recommend aquarium glue too if someone wants to try this as a better choice.
  6. Zurd

    Drip tip falling - Best way to tighten/glue them?

    There is no gap to fill. Like I said, I glued the top, what is outside, not inside.
  7. Zurd

    Drip tip falling - Best way to tighten/glue them?

    I vape at only 13.5 watts, it will never heat enough to vaporize the glue. I'm so please with this new setup, it's working like a charm, I should have thoughts about this years ago! Aquarium glue is a very good idea, I will keep this in mind if I ever make another one.
  8. Zurd

    Drip tip falling - Best way to tighten/glue them?

    Yes, I specifically said how many times it happens: "doesn't happen often, about once a year or so" :) It is rare but like I said, when it happens, it is very annoying. Replacing the o-rings is a good idea, but again, not a permanent solution and the drip tip can still fall. Problem is that my...
  9. Zurd

    Drip tip falling - Best way to tighten/glue them?

    Well, finally I made the decision to use some glue, specifically Ethyl cyanoacrylate, commonly known as krazy glue: Ethyl cyanoacrylate - Wikipedia I've put some at the top only, on the outside. I really don't think there will be an issue whatsoever, the top barely heats, so the chance of...
  10. Zurd

    Drip tip falling - Best way to tighten/glue them?

    Really not a bad idea, I shouldn't have bought bigger o-rings but instead just put dental floss. I will do that in the meantime. It is, however, not a permanent solution which I'm more looking for but thanks for sharing!
  11. Zurd

    Drip tip falling - Best way to tighten/glue them?

    Hi, been vaping for quite some years already and I have a very small problem, sometimes my drip tip fall and I lose it without my knowledge. It really doesn't happen often, about once a year or so but when it does, it's very annoying to vape without a drip tip, it's actually doable but not fun...
  12. Zurd

    Vaping with and ecig plugged into the wall ?

    Awesome explanation Izan. Makes sense now! I'll just stick with batteries. I was just thinking about the wall plug because right now my 18650 batteries are almost dead (Samsung INR18650-30Q). Just bought new ones yesterday (Samsung INR18650-25R). The one I have right now , I've only had them...
  13. Zurd

    Vaping with and ecig plugged into the wall ?

    Guess that what it comes down to. I will stick with 18650 battery then. It's a lot more small than a big PSU somewhere around my desk ahah How come every solution you found includes a PSU? A plug in the wall can't give enough power or amps to an ecig and you need to make an electric conversion?
  14. Zurd

    Vaping with and ecig plugged into the wall ?

    Nice find! But 110$ for the vape station then another 110$ for the mod, total of 220$. The cable is big and it's underneath the vape mod, meaning when you put it down, my RDA will leak. There has to be a better alternative than this.
  15. Zurd

    Vaping with and ecig plugged into the wall ?

    Hi all, any vaporizers on the market you can plug into the wall and vape with it without any battery? It would be great to have one of these on my computer desk with a very long cable. My vaporizer right now has a USB passthrough but it doesn't work without a battery and I really don't like the...
  16. Zurd

    Request a list of Canadian suppliers (Liquids & Vaporizers) (via PM only)

    just go to www.vapingmegalist.com
  17. Zurd

    Request a list of Canadian suppliers (Liquids & Vaporizers) (via PM only)

    its not a list anymore, its all on a website so it's like always updated :) check your pm, i just sent it to you, its also my signature :)