100% VG possible?
- Thread starter sinners
- Start date
- th_trl_thread_readers 0
- Status
Yes it is possible . If it is too thick , dilute it with a bit 5-10% distilled water.
VG is very very thick.
Flavors and the nic juice (also vg based) thin it somewhat but a little extra thinner is usually required.
5% to 10% water or Ethanol, or a mix (like vodka) thin it and
Ta Da, no PG.
Works for some.
Some shops sell all VG juice, some thicker than other.
Rocket
(whoops, a minute late
)
Flavors and the nic juice (also vg based) thin it somewhat but a little extra thinner is usually required.
5% to 10% water or Ethanol, or a mix (like vodka) thin it and
Ta Da, no PG.
Works for some.
Some shops sell all VG juice, some thicker than other.
Rocket
(whoops, a minute late
)
Last edited:
some folks regard VG as more healthy than PG, but lately its been looking the other way around. i personally dont do much research on it, but i did read about some folks having window film from condensed VG vapor. search for the window film ECF thread.
I too am thinking of going all VG. I just don't like throat hit, but love lots of vapor. I just started to DIY, so I'll play around with it.
I don't think so. Some people are allergic to PG. Some, because it is plant based are allergic to VG. I think it's less than 10% are actually allergic. Some find either one an irritant. Some simply prefer one over the other.
Either one is an option. As far as healthier, I wouldn't say it has been found that one is healthier than the other. Just personal preference.
sinners,
yes maybe, maybe not
100% of one or the other just might be the biggest gamble. Unless of course you have a sensitivity to one or the other.
Some people have a real sensitivity to PG. 30%PG/70%VG usually eliminates that. Some are afraid of the "windshield film" from VG but most of that is condensation that collects other particles and collects on the windshield. Even a single fingerprint can be spread over most of a clean windshield (or camera lens).
I don't 'like' 100% of either. 70/30, 50/50, 30/70 or anything in between works for me.
The jury isn't in on which is healthier. Not yet. But vape what causes you the least concern. It's easier that way and will have a better chance of working on an individual level.
Rocket
yes maybe, maybe not
100% of one or the other just might be the biggest gamble. Unless of course you have a sensitivity to one or the other.
Some people have a real sensitivity to PG. 30%PG/70%VG usually eliminates that. Some are afraid of the "windshield film" from VG but most of that is condensation that collects other particles and collects on the windshield. Even a single fingerprint can be spread over most of a clean windshield (or camera lens).
I don't 'like' 100% of either. 70/30, 50/50, 30/70 or anything in between works for me.
The jury isn't in on which is healthier. Not yet. But vape what causes you the least concern. It's easier that way and will have a better chance of working on an individual level.
Rocket
Last edited:
In theory, if you can believe everything the FDA says then both PG and VG are "safe" products. Dow Chemical would have you believe inhaling PG is practically better than air. Ultimately, I think if there was any serious danger we wouldn't be inhaling either because there would be a flood of vaping related deaths - and there aren't. We all would like to see more testing though.
- Status
