1455D801, OKR T6, Lipo 7.3v 1300mah MOD

[1mouse3]

started to round up stuff to make a box mod, so far I got a 1455D801, OKR T6, Lipo 7.3v 1300mah, Fat daddy 510, a random switch, resistors 220/270/10k ohm, a 22uf cap, 1k 15 turn pot an a 5.1v zener. radio shack has damn near nothing for build supplys, a 5.1v zener was all they had under 12v an a 1k pot was the smallest they had. so going to use the 1k pot parallel to 270ohm resister to get round 215ohm an need to find out if this 5.1v zener can be used in place of a 5.6v. I also need to figer out what to use for a charge jack, a 3 pin barrel off a laptop may work out. this is going to take magic to get everything in this box. this is a schematic i am going by but am adding a 22uf cap on the input of the chip.

i.imgur.com/ZCjZQZw.jpg
dropbox.com/s/p87rj1j957cpewq/2014-11-15%2011.11.52.jpg?dl=0 < add w w w . before

 

[Susan~S]

Hello and welcome to the forum. Glad to have you here!

Try browsing around the Modding Forum. Read all the "stickies". You will not be able to post over there until you get in your first 5 posts (and the server updates at :25 past the hour).

You will not be able to post pics (if linked to from another site) until you get in 5 posts >> New members must post 5 times in the New Members forum

 

[1mouse3]

I understand an thanks, will look around more there latter