16340 mods?
- Thread starter Vapor Vinny
- Start date
- th_trl_thread_readers 0
-
- Tags
- madvapes
- Status
Yes I have built several single 16340 mods. What are your concerns or questions about using them.
Don't really have a concern yet, it's just a size issue. They are shorter than AAA batteries, correct? Also, is there a dedictated and wired holder I could use with them in a mod? If not, how would I wire them to provide power. I'm a complete noob, but give me a power supply and a positive and negative wire coming from that supply and I'm good to mod.
I haven't found a dedicated and wired holder for 16340's. But you can use just about any battery clips. Yes they are about 8 mm shorter than AAA batteries. Here is a link to a how to I did using a 16340 in a wood mod. It will show you how to wire it in. Have fun.
http://www.e-cigarette-forum.com/forum/modding-forum/341949-how-build-3-7v-wood-mod.html
http://www.e-cigarette-forum.com/forum/modding-forum/341949-how-build-3-7v-wood-mod.html
So basically, just epoxy the battery clips, solder the positive and negative wires to them? I appreciate the link. What you did is exactly why I'm wanting to do, only with an aluminum enclosure. How does that vape, battery life?
Works great usually run a vivi nova with a 1.8 or 2.4 ohm head plenty of vapor and flavor. I usually rotate 3 PV's throughout the day and it lasts me until bed time when I swap it out and put it to recharge. So figure about 8 hours if used exclusively.
What enclosure do you have and what else is going in? Madvapes has a small one that will fit 2 with room to spare.
http://www.e-cigarette-forum.com/forum/battery-mods/110061-small-5v-box.html
http://www.e-cigarette-forum.com/forum/battery-mods/110061-small-5v-box.html
- Status
