18350 mech mod Vs Vision Spinner and Aerotank upgrades?

[EazyDuz]

Just two questions.

Ive been using a Vision spinner 2 1100Mah for a long while now with a Kanger Aerotank V2 which has been very good and reliable.
I recently got a Kamry E pipe as a gift. The Kamry takes a 18350 battery.

Problem is there isnt a lot of difference in vaping between the two, this is with the same tank with the same coils on both. Is this normal? If anything the pipe loses vape sooner due to battery drain than the Vision Spinner 2. Is there anything i can do to beef up the E Pipe for a better throat hit and more vapour?

Which brings me to question 2.
Is there a good upgrade to the Kanger Aerotank? I want a new tank anyway to replace the stock Kamry one which is top fed and tastes burnt quickly, and i dont want to keep changing out tanks between the Kamry and the Spinner hence i need a good, ego threaded tank for the mech pipe. (Kamry k1000 is 510 threaded but i have a 510 to ego adaptor too)
Thanks in advance

 

[Baditude]

Is there anything i can do to beef up the E Pipe for a better throat hit and more vapour?

Higher nic concentration in the e-liquid for more throat hit. Higher Vg ratio in the e-lquid for more vapor.

Which 18350 battery are you using? I'll recommend the new AW IMR as the best 18350 battery on the market now.

Which brings me to question 2.
Is there a good upgrade to the Kanger Aerotank? I want a new tank anyway to replace the stock Kamry one which is top fed and tastes burnt quickly, and i dont want to keep changing out tanks between the Kamry and the Spinner hence i need a good, ego threaded tank for the mech pipe. (Kamry k1000 is 510 threaded but i have a 510 to ego adaptor too)

Might want to try an Aspire Nautilus. Probably is the most popular clearomizer tank now.

 

[EazyDuz]

I'm using an Efest IMR 18350 800MAH 3.7V RECHARGEABLE HIGH DRAIN ,FLAT TOP BATTERY

 

[sacullen]

Coils with a lower resistance might give you what you want. Are they available?

 

[edyle]

Just two questions.

Ive been using a Vision spinner 2 1100Mah for a long while now with a Kanger Aerotank V2 which has been very good and reliable.
I recently got a Kamry E pipe as a gift. The Kamry takes a 18350 battery.

Problem is there isnt a lot of difference in vaping between the two, this is with the same tank with the same coils on both. Is this normal? If anything the pipe loses vape sooner due to battery drain than the Vision Spinner 2. Is there anything i can do to beef up the E Pipe for a better throat hit and more vapour?

Which brings me to question 2.
Is there a good upgrade to the Kanger Aerotank? I want a new tank anyway to replace the stock Kamry one which is top fed and tastes burnt quickly, and i dont want to keep changing out tanks between the Kamry and the Spinner hence i need a good, ego threaded tank for the mech pipe. (Kamry k1000 is 510 threaded but i have a 510 to ego adaptor too)
Thanks in advance

I don't think there's room in the epipe for a kick module.

If you got a cheap $10 aluminium m16 sentinel clone from fastech and a kick module, you'd have a serviceable equivalent to your spinner where you use 18350 batteries instead of ego type batteries