18650 E Power now at Hoosier E Cig Supply

[Led Hendriani]

Woohoo! Just ordered a titanium 14650 ePower for my girlfriend. She really wants to quit the analogs and with the way the ePower hits with a DC, I think she finally will!

She has tried the juices I make but says they are too sweet and candy-like and wants only tobacco... I did buy some tobacco from FA so she gets her wish!

This is a great price for the 14650 kit Brent. Just wanted to say thanks!

The 25 1.5 DC's should hopefully last us a bit!

 

[Led Hendriani]

Update on baking shrink tubing:

I had previously thought that the heat of just using the unit was softening the shrink tubing... well, this is not the case...

It turns out that when I leave it inside my center console on a hot day to go into a job-site, it re-bakes it and loosens it up!

 

[cherewine]

Any update on the 5v switches for the 18650 e-power yet?

 

[sonicdsl]

Any news on the 5v switches for 18650?

 

[brent_mc]

5v switches should be here this week. I was supposed to have had them in the last shipment, but they "forgot to tell me that they weren't including them until I asked why I didn't get them. But they did accidentally ship me 100 extra 14650 batteries and didn't charge me for them. So I was able to slash the price of them to $4.00!
I know that won't help out to many people on this particular thread, but if you've got a 14650 E-Power or know someone who does... Now you know where to get spare batteries cheap!

 

[sonicdsl]

5v switches should be here this week. I was supposed to have had them in the last shipment, but they "forgot to tell me that they weren't including them until I asked why I didn't get them. But they did accidentally ship me 100 extra 14650 batteries and didn't charge me for them. So I was able to slash the price of them to $4.00!
I know that won't help out to many people on this particular thread, but if you've got a 14650 E-Power or know someone who does... Know you know where to get spare batteries cheap!

Good news! Thanks!

Sent from my DROID X2 using Tapatalk

 

[sonicdsl]

OK, so I've got these ePower DC cartos that are worthless to me since I have the 18650 model. Is there not an adapter or two to make these work? If not, fine, I'll find someone who can use them.

I need some advice then on which atomizer/drip tip combos for dripping on this pretty e-cig that is just sitting here looking pretty for now, and also some cartos for regular use. Brent will the DC cartos you have work on this? Which ohm is best, 2.0? I've seen some warnings about using some of these on ePowers, so I want to be certain.

TIA to anyone who can help!

You should be able to use a 510 to 510 adapter. I don't have any, but lot's of other vendors do. I'd recommend using the 1.5ohm XL dual coils, either clear or steel.

Thanks for the advice Brent! Your suggestion works. 510 to 510 adapter FTW!

Got this carto on now and WOW - better than I expected, for sure!



Now just need the 5v switch for the other toys.

 

[brent_mc]

5v switches are finally here!!! BOUT TIME!

 

[SonnyCrack]

I ordered the 5v switch! Can't wait to try it! BTW, I LOVE the E-Power 18650.. Never had any issues so far.. Hope Smok gets it together so I can refer all my friends to Hoosier to order a kit.

 

[Led Hendriani]

Waiting on my 5V switch also... and trying to figure out how to add 2 18650 bodies together so that I can use it for 5V cuz I just got 12 more Panasonic 18650's (2200mah) for a steal and don't want to buy any 18350's anyhow...

...it will also be able to be used as a walking cane I guess

Well at least a nun from a set of nunchucks...

 

[sonicdsl]

5v switches are finally here!!! BOUT TIME!

Wish you had the batts too

 

[Led Hendriani]

Dang holiday
Maybe tomorrow

 

[Led Hendriani]

It's in the mail!

BTW, it was pretty easy to push the bottom end cap out... I could put 2 of these together if I used a screw down clamp...or even 2 clamps with some shrink tubing underneath... at least that is how I will try it out when it gets here!

 

[tofucute]

I wanted to get a 3.7 and a 5 V switch. Will you have the 3.7s in stock anytime soon?

 

[Led Hendriani]

Just got it and DANGIT does it hit good and with more flavor and with less time to hit it!
HAMMER TIME!


You can't touch this!

 

[sonicdsl]

Just got it and DANGIT does it hit good and with more flavor and with less time to hit it!
HAMMER TIME!


You can't touch this!

You mean the 5v switch for the 18650? If so, did you use an atty or a carto, and which one? Thanks

 

[Led Hendriani]

1.5 metal dual coil carto! Unbelievable hit! It can work the way I have it set up, but since it is held together by shrink tubing it easily breaks the connection. I want to build some sort of basic box for two 18650's ( I now have 16 of them) to be side by side and have the 5V connector screwed into it.

My girlfriend saw me hit it and said "you're not gonna really take that anywhere with you, are you?"!!!!

The reason that I want 2 18650's is because with the 3.7V an AW IMR lasts only about 3-4 hours and then gets down to 3.75V or so and it is somewhat harder hitting and takes longer to get a good hit. I thought that I was going to get a day to a day and a half with the 18650's (and I would if I would have stuck with regular Joye 510 atties). It is a trade off that I am OK with now that I have experienced the better hitting DC's!!!!

I still have yet to find out if vaping at 5V will increase the battery life between charges since you don't need to take a longer hit anymore... either way I will accept what is.

 

[GiMante]

Brent, are you going to be getting any more 18650 ePowers in stock?

I just bought another 5v switch and needed an extra chrome bare bones

 

[brent_mc]

Brent, are you going to be getting any more 18650 ePowers in stock?

I just bought another 5v switch and needed an extra chrome bare bones

Sorry, but until Smok Tech gets their QC on the 18650 E-Powers under control I won't be ordering anymore.

 

[brent_mc]

I wanted to get a 3.7 and a 5 V switch. Will you have the 3.7s in stock anytime soon?

Sorry, but no.