18650's For Mech Mods?

[hdEgoDeath]

Looking for facts or personal opinions from experience for which cell you would reccomend to give the hardest hit off a single 18650 battery mech mod. Appreciate any feedback.

 

[Izan]

Hi,
Which mech and what is your build?
Mooch's Recommended Batteries | E-Cigarette Forum

Cheers
I

 

[Vinnybagodoughnuts]

 

[Rossum]

Hardest hit? Pretty sure that's going to be the Samsung 20S.

 

[sonicbomb]

When we know what build you are using we can better recommend a battery

 

[UncLeJunkLe]

But there are factors that need addressed before you go and buy your batteries. See post above mine.

 

[hdEgoDeath]

Hi,
Which mech and what is your build?
Mooch's Recommended Batteries | E-Cigarette Forum

Cheers
I

SVA MOD UniMech 0.3ohm fused claptons

 

[hdEgoDeath]

Looking like Samsung 20S it is...

 

[gsmit1]

SVA MOD UniMech 0.3ohm fused claptons

The 20S is a magnificent 18650 for mechs, but if you plan on staying at .3 then VTC5As or P26As might actually be a better choice. They may not hit quite as hard up front, (although the VTC5A does for the first several hits) but WAY better battery life and still great performance.

However if you plan on ever needing the 30 amps that the 20S will give you, then you should get some 20S.

 

[dripster]

SVA MOD UniMech 0.3ohm fused claptons

Would that be vaping on a single coil at .3 or a dual coil setup consisting of two .3 coils? The latter option would be giving you a .15 so if that's your case, go with the Samsung 20S (if not, consider @gsmit1 advice).