19mm/20mm RTA's???
- Thread starter Ragnar94
- Start date
- th_trl_thread_readers 0
- Status
I have a EHPRO Big Buddha Mini that is 18mm I think. It has a restricted lung hit airflow, easy to build single coil deck and fairly easy wicking. It bottom fills through a screw like a kayfun. This may be completely useless info though as it may be hard to find.
On an istick 40w (22mm RTAs sit flush) and next to a 22 mm OBS Crius...
Sent from my SM-G930R4 using Tapatalk
On an istick 40w (22mm RTAs sit flush) and next to a 22 mm OBS Crius...
Sent from my SM-G930R4 using Tapatalk
The 10ml EHPRO Big Buddha is amazing and I've heard the same on the miniI have a EHPRO Big Buddha Mini that is 18mm I think. It has a restricted lung hit airflow, easy to build single coil deck and fairly easy wicking. It bottom fills through a screw like a kayfun. This may be completely useless info though as it may be hard to find.
On an istick 40w (22mm RTAs sit flush) and next to a 22 mm OBS Crius...
Sent from my SM-G930R4 using Tapatalk
sent from my Galaxy Note 4 using MOAR 2.1b ROM running tapatalk
Looking more MTL mate, although this is an optionI have a EHPRO Big Buddha Mini that is 18mm I think. It has a restricted lung hit airflow, easy to build single coil deck and fairly easy wicking. It bottom fills through a screw like a kayfun. This may be completely useless info though as it may be hard to find.
On an istick 40w (22mm RTAs sit flush) and next to a 22 mm OBS Crius...
Sent from my SM-G930R4 using Tapatalk
Oh you can tighten the airflow right down to nothing. It has two airflow openings on the deck that connect to two separate airflow holes on the bottom that each have a screw adjustment. Wide open its restricted.
See one of the airflow holes and it's adjustment in this picture....
Sent from my SM-G930R4 using Tapatalk
Just an FYI... I've never bought from here but this appears to be the only place online to buy one...
EHPRO-BIG BUDDHA MINI BLK TANK
Sent from my SM-G930R4 using Tapatalk
EHPRO-BIG BUDDHA MINI BLK TANK
Sent from my SM-G930R4 using Tapatalk
How about a Kayfun mini v3? This one is a clone.
Kayfun Mini V3 Silver 2mL 19mm RTA Rebuildable Tank Atomizer
Kayfun Mini V3 Silver 2mL 19mm RTA Rebuildable Tank Atomizer
Kayfun Mini V3 is a good bet! Also, the buddha mini is a great little atty but hard to get in the EU these days. Great for M2L.
yeah I may just go with the Kayfun, or the one you guys mentioned, but hows the Taifun GS 2?
How's this?My Taifun gt III came in from FT.
Needed a quick wash down, the screws are nice, the positive voltage path is nice, tank is nice, easy to wick. Flavor & th are great too.. Air flow is smooth with a fine air control for a restriced lung hit, about just right for single coil. Its more open than my drilled out bachelor. Assymbly is tight no weeping press fits here. (like the smok tfg2). I like the new taifun a lot!
24g 316ss, 3mm, 6 wraps, .34 ohms, 40-45w pwr. Air wide open, lung pulls.
Laid mandrel on base, attached leads, pulled up the coil a tad.
Started with a spread and rolled, doubled over DM ball strip piece... Stretched out a little. I pulled till it stopped, then stretched to even the density enough to pull it through and get good vibrations. Its Erie man. (that's basically my installation method)
you reckon its worth 45 quid then? can only get the 18mm from LPV
I'm guessing its gunna have the same flavour as the whole taifun line, incredible
Its 18 going on 19mm because of the AFC ring etc etc...there is only one size anyway! £45?!?! you must be getting a better exchange rate than me or lots of vouchers haha. It is a bargain though - just saw it 5 minutes ago!!
another + for the Taifun GSII. The 19mm has better flavor and performs better than the larger 23mm one.
I think its easier to work with than the KF mini V3.
I think its easier to work with than the KF mini V3.
- Status
