2.4-2.6 or 2.6-2.8 ohm?

[kklais]

Could someone please explain to me the difference between the resistance options 2.4-2.6 or 2.6-2.8 ohm? Which would work better on the TW 501 Titan?

 

[mgaruccio]

the resistance you use determines the level of power/heat that your atomizer will produce, with lower resistances producing more/hotter vapor, they should all work without a problem on your device so its up to you to decide what you like the best.

 

[dormouse]

If clear, the 2.4's are more prone to cracking

And I don't know if either is suitable for a slim 510, though some may say the 2.6-2.8 is OK

Either is suitable for a fat battery 510 threaded model like Ego, Riva 510 - i.e. models with 400mah+ batteries

 

[Nomoreash]

The resistance(ohms) in combination with the output of the battery(voltage) = watts. You can use a combination of different battery voltages ohms to get the same watts. Playing with the numbers at the link below will give you a better idea of how it works.

with a 501 I would go with the 2.4-2.6, the less resistance will give you a slightly stronger vape on those batteries. You also don't want to go much if any below that on the small 510 type batteries because it's harder on them will drain faster, I'd recommend staying in the mid 2s and above. The two ranges you listed above probably won't be a huge difference between them, either will work but the 2.4-2.6 should be slightly stronger.

Ohm's Law / Watt's Law Calculator