3.6 volts on 2.4 ohm coil

[mashsmash]

Hello fellow vappers I have build my mod but need an assurance before i test as i only have 1 coil and if it breaks im screwed, I have 3 AA nicd 600ma 1.2 volt batterys and wondering if that would work with my 2.4-2.8 ohm clearomizer? Basic wiring battery pack to connector from connector the earth is on a momentary switch and back into the battery pack as the active Thanks guys hope to hear some helpfull news!

 

[tomvonc]

3.6v on 2.4-2.8ohm? ..... ;-)

 

[WarHawk-AVG]

3.6vx3.6v / 2.5 = 5.4 watts

Kinda low..it will vape but it won't be the best

I would recommend 1.8-2.0 on that, that will give you a pretty decent vape for the voltage, that is IF your batteries can handle the current flow

There is a fellow on the forum that uses NiMH batteries in a mod..fast charge, vapes pretty strong...CHEAP!

http://puckecig.com/2011/06/how-to-build-the-puck-e-cig-battery-mod-part-1/
http://puckecig.com/2013/02/the-puck-ii-ecig-mod/

Heck just Google DIY box mod and there are TONS of cheap things you can do

http://diyvapormods.com/diy-ecig-nimh-box-mod/

Good luck...post pics!

 

[tomvonc]

600 mAH isn't much capacity for a start. When I started vaping I bought a couple of 600 batts and they spent more time on charge than in my gob. Also even with a 1.8 coil, the vape was crap. I need 4-4.4v on a 1.8 to get anything half satisfying.

 

[mashsmash]

600 mAH isn't much capacity for a start. When I started vaping I bought a couple of 600 batts and they spent more time on charge than in my gob. Also even with a 1.8 coil, the vape was crap. I need 4-4.4v on a 1.8 to get anything half satisfying.

Thanks for all the help guys!! I just fired the old girl up then and she is a beauty at the least il leave some pics here of my amateur first mod I will be updating that last picture with the current as i have completly soldered everything at this moment!

 

[Nikkel]

Have you considered the 2/3A size NiMH batteries? Listed as 1600mAh, 10C.

 

[mackman]

Hey good for you. It has got you thinkin

 

[StevenServo]

best vape would be around 1.8