5 vt and 3.7 vt box mods cheap
- Thread starter danlisi
- Start date
- th_trl_thread_readers 0
- Status
Newyears sale 5 volt 510 connectors $26 3.7 volt In black 510 connectors $17 all warrantied
Last edited:
Sorry about that I have limited photo capabilities try looking in the blank boxes that say they have no pics there's some good pics in there
I guess I'm really unlucky, my repaired box mod is already broken. The 808 connector was loose, it kept on turning when I screwed an atomizer (with a 901-510 adapter), since sometimes it wasn't firing the atomizer, I kept on screwing it to make it work but the red wire soldered to the 808 connector of the box mod also kept turning and at which point it broke loose from the 808 connector. 
Seems like easy to repair tho, I could just glued the 808 connector to the box mod with some kind of glue, which one would be good ?
Then I could just solder back the red wire into the center hole of the 808 connector, right?
Doesn't really matter tho, I have a real 510 box mod coming and a HV 510 too coming from you, I already have my HV atomizer to try it !
Seems like easy to repair tho, I could just glued the 808 connector to the box mod with some kind of glue, which one would be good ?
Then I could just solder back the red wire into the center hole of the 808 connector, right?
Doesn't really matter tho, I have a real 510 box mod coming and a HV 510 too coming from you, I already have my HV atomizer to try it !
Yes you can just solder the red wire back and use any good epoxy to glue the connector in place I'm sorry for your misfortune with this mod
Well it has to happen to someone, you must sell quite a lot of these. I'm actually happy it has to happen to me, I'll be able to try to solder and epoxy it for the first time, shouldn't be too hard, I also need to buy a digital multimeter, this should be a good introduction for me in the world of DIY box mod
Are you sure it's really ok to use regular atty on your HV box mod, because at 2.3 ohms and 5 volts it gives 2.2 amps of current, they say over 2 amps it's a little bit risky to burn the atty and I'm not sure but a fully fresh battery should discharge around 5.5 volts which would give 2.4 amps ! No fried atty from you doing that yet?
Are you sure it's really ok to use regular atty on your HV box mod, because at 2.3 ohms and 5 volts it gives 2.2 amps of current, they say over 2 amps it's a little bit risky to burn the atty and I'm not sure but a fully fresh battery should discharge around 5.5 volts which would give 2.4 amps ! No fried atty from you doing that yet?
Oh I just read that your regular atty are 3.5 ohms, so that would give you 1.4 amps at 7 watts, but they say a regular atty is 2.3 ohms. I really need to buy a digital meter to know what ohms I got with my atty. References : FAQ: What are these HV and LR attys? Do I need them? Are they safe to use? | Vaping Guides
Regular attys have worked fine for me on my mods they are what I use when I use one of my 5 vt box mods my mods at a full charge put out 5 vts not 5.5 I've never used hv attys and don't even own one I don't know what a new attys ohms are but my used ones are all about 3 ohms and my wifes 801 s are 3.1 ohms and that's what she uses on one of my boxes just a little info
I've been using the 5 volts 510 box mod and another 3.7 volt 510 box mod for a few days now, works perfectly good ! Thanks!
For a very good price I'm now testing 3.7 volts, 5 volts, HV atty, LR atty (both in 306 and 510) and plain regular 306 and 510, I'm trying to find my sweet spot and it's likely to be at 3.7 volts and a normal 306. These LR atty get so heat and produce so much heat and vapor it's plain crazy.
For a very good price I'm now testing 3.7 volts, 5 volts, HV atty, LR atty (both in 306 and 510) and plain regular 306 and 510, I'm trying to find my sweet spot and it's likely to be at 3.7 volts and a normal 306. These LR atty get so heat and produce so much heat and vapor it's plain crazy.
Second sale a black 5 vt 510 with a slightly crooked 510 connector only $26 I only have one
- Status
Similar threads
