510 Atomizer turned Flashlight mod

[Connman]

This 510 atty wasn`t performing all that great so it got donated to this flashlight atty mod idea I wanted to try. And it works great so far. Still being tested for last-ability and all things like battery drain ect.

I had made a mod out of a 3 AAA battery flashlight and had 9 led lights from doing that. So I gutted out a 510 atomizer then connected one light in stuck it all back together and now attached it to my keychain Flash light mod. Never know when you will need a light.
With this mod you will always have one with your pv.

Sorry if I posted this in the wrong area but it was a atomizer.

 

[SethG]

I think this is in the right place, it is after all an atty mod...

I thought about doing this with a single LED however reconsidered after thinking about trying to fumble around for the flashlight atty in the dark. Great minds think alike I guess?

Any pictures?

 

[Connman]

I think this is in the right place, it is after all an atty mod...

I thought about doing this with a single LED however reconsidered after thinking about trying to fumble around for the flashlight atty in the dark. Great minds think alike I guess?

Any pictures?

Hi SethG,
I have this one on a key chain with it`s partner the spare backup pv and will always be right there hanging around ready for use.

There should have been 3 pictures in my post but they can also be seen at photobucket in this album.
Mod to make back into a Flashlight pictures by _Connman_ - Photobucket

 

[SethG]

There should have been 3 pictures in my post but they can also be seen at photobucket in this album.
Mod to make back into a Flashlight pictures by _Connman_ - Photobucket

The pictures loaded this morning, sorry! My internet conection has left a lot to be desired this last week. I'm wondering how much other content I'm missing with all of the partial page loads I've been getting.

Thanks!@

 

[KarrMcDebt]

After seeing this I had to make one out of the dead 901 atty I had. Now if I could just get one of those mad vapes flashlights LOL.

 

[marlboro_man]

What a really sweet mod. I really like it,,Now where can I get a torch like that?

Art

 

[XgovernemntAgent]

order something from mad vapes

 

[danlisi]

How did you make that flashlight mod? I'm dieing to make one and can't figure out how to make the batt connections could you give me some pics of the inside of that mod? I have the light and the 510 connector And a batt I'm ready to go I just don't know where to make the connections in the light.please help me out
Dan

 

[four2109]

There are a couple of tutorials on the Madvapes forum.

 

[haft2doit]

Nice job. I made one of those. Still need to make the led for it. @danlisi I made mine with only one extra part. (the 510 bat connector. I drilled out the existing silver flashlight lens got a short 510 bat connector from madvapes (the short one is needed). Then cut a finishing nail and put it through the hole in the connector and put a drop of solder on it to make contact with the battery. and glued the connector in the hole. It's that easy! Had to adjust the copper strip attached to the button to get a good action but other than that it took 5 min. Oh and I had to cut the spring down because the 10440 battery is longer than a aaa. I get a flashlight with every order so for $1-2 connector you have a PV!

Edit I forgot to mention I put a drop of solder on the end of the copper strip so when you push the button it has to travel less to make contact with the connector.

 

[eciglopedia]

sweeeeeeeeeeeeeeeeeet!

 

[jivefly]

I know this is an old thread, but how was the atomizer put together with the LED inside? I'd like to do this myself but don't want to mutilate a 510 atty without knowing what I'm getting into. Any info is appreciated.