510 carts on super6
- Thread starter jliu
- Start date
- th_trl_thread_readers 0
-
- Tags
- litecigusa super t vaporkings
- Status
Is this one of those new aluminum bottomed ones? If so, i tested one a customer sent me and worked for me (it didn't work for him too)however, i did notice you need to tighten it harder then a brass bottomed atomizer and i suspect it may be because the aluminum bottom vs. Brass bottom and i suspect they don't make as good an electrical connection. Try cleaning off the bottom contact of the cart (aluminum oxidizes really quickly and can created a almost white powedery layer). Then re-install and tighten it firmer then you would a normal 510. See if that works and let me know.
As a side note, i did order a brand new one of those 510 carts last saturday and am still waiting to get it in, when i do, i will test it too and report back.
Last edited:
I'll test that when I get home tonight. I don't really tighten down too hard so I'll try a bit harder this time.
I can always try a brand new cart as well.
I will update everyone tonight.
Almost didn't answer your question ... yes its the aluminum bottom ones.
I can always try a brand new cart as well.
I will update everyone tonight.
Almost didn't answer your question ... yes its the aluminum bottom ones.
Then there are other times when i totally drop the ball and miss a pm or post
3 forums, 2 email accounts, website email account and Forum posts, it's a hell of a lot to keep up with and i have been known to drop the ball. 8-o
3 forums, 2 email accounts, website email account and Forum posts, it's a hell of a lot to keep up with and i have been known to drop the ball. 8-o
you should make each account you have made for a certain use.... Like PMs are used for simple questions.... your email on your sight for serious questions like my Precise is not in the mail box yet and I saw mail man puffing a way with it lol.... jeees 3 forums and 2 email accounts.... total madness 8-o8-o
jeees 3 forums and 2 email accounts.... total madness 8-o8-o
Last edited:
Then there are other times when i totally drop the ball and miss a pm or post
It's OK..... Cause we all know it's Not intentional
The only problem i have is some 510 atomizers fit and others dont, it could be the aluminum top or the threading on some atomizers! Not a big issue though.
The only problem i have is some 510 atomizers fit and others dont, it could be the aluminum top or the threading on some atomizers! Not a big issue though.
Do you know what kind of atomizers they were that didn't fit? Are any of them aluminum bottomed ones too? If not, what kind of brass ones weren't fitting?
Last edited:
I just ask because this guy was having problems threading in aluminum bottomed atomizers he had on a different mod:
http://www.e-cigarette-forum.com/forum/nhaler/80595-whats-up-aluminum-base-801-attys.html
Perhaps the chinese are trying to save a .01 cent per unit by switching to aluminum.
I suspect that is why some may be having problems getting the aluminum bottomed carts to work properly.
http://www.e-cigarette-forum.com/forum/nhaler/80595-whats-up-aluminum-base-801-attys.html
Perhaps the chinese are trying to save a .01 cent per unit by switching to aluminum.
I suspect that is why some may be having problems getting the aluminum bottomed carts to work properly.
David they are brass. I only have an issue with one TW atty and a LR atty from Nhaler.
Last edited:
Yes David... I have had a problem with a regular Carto NOT an atty.....But all i did was just screw it on a bit tighter and that's it..... It worked fine after that....I honestly believe that these Cartos are all different depths that's why i had a problem with one....But like i said, I just screwed it on a little bit tighter and That's it..... But not too tight though,Cause i think if i would have kept tightening it would have broke.....Just a little tighter then usual is all you need .... Hope that helps
Yes David... I have had a problem with a regular Carto NOT an atty.....But all i did was just screw it on a bit tighter and that's it..... It worked fine after that....I honestly believe that these Cartos are all different depths that's why i had a problem with one....But like i said, I just screwed it on a little bit tighter and That's it..... But not too tight though,Cause i think if i would have kept tightening it would have broke.....Just a little tighter then usual is all you need .... Hope that helps
Do you mean the new 510 cartos or 901 cartos?
Was it a single attie and did you have more of the same brand to test if the other ones fit? Sorry to twenty question you, just want to isolate the problem
try to shimmy the center pin of carto/atty out a bit, sometimes it gets pushed in too farand looses contact or gets pushed up in transit(mailing)...shimmy the post out a lil, screw back on n try out...works for me when have probs like that..worth a try
No David it's the regular KR 808 Cartos....Link KR808D-1 Blank Cartomizers
Hey, I never ordered a Precise or a Super Six and I still have not received one.
(my wife won't let me)
For sale: 1 Wife not sure if she has aluminum or brass bottom.
If you tell on me I will deny I posted this.
(my wife won't let me)
For sale: 1 Wife not sure if she has aluminum or brass bottom.
If you tell on me I will deny I posted this.
Last edited:
- Status
Similar threads
