5volt mod
- Thread starter pigspleen
- Start date
- th_trl_thread_readers 0
- Status
make one first to see if you like it? for under £5 + dead battery
what do you use to vape just now?
what do you use to vape just now?
well i got a 5 volt mod the other day and its way too much for me..plus i get a bad taste too....back to the 3.7 box mod
I wouldn't give up on 5v only after a couple days......
Ya have to FEED that sucker, and the only way I've managed to do it on my GLV5v 510 was to use the blue foam cart mod with the straw well insert.
Works like a charm for me, and although my 3.7v Protege does a pretty good job, I much prefer the 5v now that I've managed to balance my DIY juice to meet the demand of the higher voltage/heat.
VapeOn,
Greg
Ya have to FEED that sucker, and the only way I've managed to do it on my GLV5v 510 was to use the blue foam cart mod with the straw well insert.
Works like a charm for me, and although my 3.7v Protege does a pretty good job, I much prefer the 5v now that I've managed to balance my DIY juice to meet the demand of the higher voltage/heat.
VapeOn,
Greg
cybevex boxmod with 510 atty...i'm gonna try 901 atty on it tonight with an 510 to 901 connector
just tried 901 and its waaaaayyyy better...i've been having alot of trouble with my 510 atties and a bad taste.....blue foam in all carts.....maybe i have to switch to 901 on all ecigs
usb box mod? didn't realize he made em with 5v yet...
everyone either likes only one or the other, few enjoy both it seems...maybe u just need new atty, or something else...anyways, i'll avoid going off topic anymore...hungry anyways, c u later...
get a GLV from greatlakesvapor
get the 801 connector and youll love 5v..
or try
Roberts Detonator at 510.. Youll love it too!!
get the 801 connector and youll love 5v..
or try
Roberts Detonator at 510.. Youll love it too!!
Remember guys, its Watts that make the vape not Volts....
The 510 is a low resistance atty, so at 5 volts its simply flows more juice than the 901 at the same voltage, hence the burnt taste with the 510 vs the 901.
510 at 5 volts = 10 watts
901 at 6 volts = 9.7 watts
(Going from memory that the 510 is 2.5ish ohm and the 901 is 3.7ish ohms)
thanks for the info.....i am hesitant to buy anymore 5volt mods maybe i can't play with the big boys....i have spent alot of moolah on this stuff and cybervexs boxmod was the cheapest one i found....works great with the 901 but can't do the 510Remember guys, its Watts that make the vape not Volts....
The 510 is a low resistance atty, so at 5 volts its simply flows more juice than the 901 at the same voltage, hence the burnt taste with the 510 vs the 901.
510 at 5 volts = 10 watts
901 at 6 volts = 9.7 watts
(Going from memory that the 510 is 2.5ish ohm and the 901 is 3.7ish ohms)
510 on 5v has been good to me except when the atty is clogged or dirty then its pretty bad.usally when i get the burnt taste its time to drip some more juice onto it.5.2 v @1.6A i just cut the cord on my xm radio ac adapter and wired a joye 510 batt conector to a piece of pipe and wired a momentary switch to it.plug it in the wall and vape away.inverter in the work van FTW!
Farm, you should make those plug in PT's and sell them..
From what I've seen Canadian vapers are a lot different from American vapers. American's want something that could be as big as a 20 gallon steel drum if it puts out 120 volts LOL Forget the flavor, as long as it puts out more vape than the fog machine at the dance club
Canadian's seem to prefer small size, and at a strength that still put out good flavor. Sounds it your plug-in PT would be well suited to that.
From what I've seen Canadian vapers are a lot different from American vapers. American's want something that could be as big as a 20 gallon steel drum if it puts out 120 volts LOL Forget the flavor, as long as it puts out more vape than the fog machine at the dance club
Canadian's seem to prefer small size, and at a strength that still put out good flavor. Sounds it your plug-in PT would be well suited to that.
I'm getting a JUICEBOX from Carlos49 over at NUVAPOR.
Reviews for this mod are absolutely outstanding.
Reviews for this mod are absolutely outstanding.
Farm, you should make those plug in PT's and sell them..
From what I've seen Canadian vapers are a lot different from American vapers. American's want something that could be as big as a 20 gallon steel drum if it puts out 120 volts LOL Forget the flavor, as long as it puts out more vape than the fog machine at the dance club
Canadian's seem to prefer small size, and at a strength that still put out good flavor. Sounds it your plug-in PT would be well suited to that.
lol.reason i like the plug in one is that its more versatile than a usb cord.every comp has a power bar and im sure people have more access to a plug in rather than a usb port.take my dad for instance he likes the idea but is comp ilerate.and im also in my shop quite a bit,so i found the plug in one works best for me.also you can put a atty connection and switch in pretty much anything.
maybe u should try a usb-ac adapter with usb pt's to use at any wall plug or power bar as well as the standard usb option...though i have not tried any PT's, so whatever...lol.reason i like the plug in one is that its more versatile than a usb cord.every comp has a power bar and im sure people have more access to a plug in rather than a usb port.take my dad for instance he likes the idea but is comp ilerate.and im also in my shop quite a bit,so i found the plug in one works best for me.also you can put a atty connection and switch in pretty much anything.
Unfortunately it is not a 5v device. Website also states no shipping to Canada.
- Status
Similar threads
