.8ohm coil for tank?

[Arel3]

Do they make such a thing as a .8ohm coil pack for tanks? I like vaping at .8ohm on my drippers, but the convenience of a tank is unmatched compared to having to drip all of the time, plus having to build coils. Do low ohm coil packs for tanks exist? I'm looking for one for the Kanger Aerotank Mega.
The lowest ohm coil pack I've found for it is 1.6.

 

[Brettanomyces]

Why not just get a rebuildable tank atty like the Kayfun?

 

[bigdaddybrink1]

Kayfun or Geni style.
the kayfun is very much like a kanger as they are both bottom coil.........

 

[moorejr300]

Aspire is coming out with the Atlantis with .5 .8 and 1 ohm builds

 

[Rickajho]

Supposedly Kanger has come out with a dual coil at 0.8 ohm that will fit your tank. But I've only seen one place selling the coils that looks kind of iffy. Check the Kangertech web site to see if it's a legitimate product.

 

[Lova]

Aspire has got a new tank coming with sub-ohm coils and supposedly 22mm diameter, it's the Aspire Atlantis. I would still go for a RBA/RTA instead of a clearomizer tank just to be safe, the coil heads might not wick enough or last long enough and with a pricy starting price for a RBA, the builds are practically free. For example for my Vicious Ant Kraken a full rebuild costs me probably $0.2-0.5 depending on how many setups I fail to make that work.

 

[jonny8u]

yes, kanger does have sub ohm coils now. they also have 1.2 ohm coils as well. wanna know how i know? we have them at our store

 

[Katya]

Supposedly Kanger has come out with a dual coil at 0.8 ohm that will fit your tank. But I've only seen one place selling the coils that looks kind of iffy. Check the Kangertech web site to see if it's a legitimate product.

Kanger does make sub-ohm coils.

http://www.myvaporstore.com/Kanger_Dual_Coil_replacement_coil_0_8ohm_p/kratm-lsah08.htm

Aspire is about to introduce their sub-ohm Atlantis coils--but you'll have to buy a new tank for them. Not compatible with other Aspire tanks.

 

[dhood]

One of my local shops also carries the 0.8 ohm Kanger coils.

 

[BrahnyMan]

Kanger makes an aero tank v2 that supports .8 ohm coils. I am using it and it is fantastic!!

 

[Rwb1500]

Supposedly Kanger has come out with a dual coil at 0.8 ohm that will fit your tank. But I've only seen one place selling the coils that looks kind of iffy. Check the Kangertech web site to see if it's a legitimate product.

They're legit. I've tried them. Pointless, but legit. I've found that at higher wattage they can't wick fast enough to be useful. So you get one good rip, prime the coil like crazy for 60 seconds, get another good rip, etc.

 

[Equilibrium]

My vote is for a Kayfun RTA. Awesome tanks! I love all 4 of mine.

 

[Kaezziel]

My vote is for a Kayfun RTA. Awesome tanks! I love all 4 of mine.

+1 for this!
Also, if you prefer dual coil, take a look at the Orchid. There are several versions out now, but I have the Tobeco Orchid V2 and I'll never give it up!

 

[Equilibrium]

+1 for this!
Also, if you prefer dual coil, take a look at the Orchid. There are several versions out now, but I have the Tobeco Orchid V2 and I'll never give it up!

I haven't tried the orchid but I hear it's a slight improvement over the kayfun. Much better airflow.

 

[Kaezziel]

Yup... but the build deck is tiny... definitely takes a bit of patience to get it right.
I was putting it on my Tesla VV/VW mod for a while... around 2 ohm total resistance. Meh...
I put dual coils in at .4 ohm total resistance and dropped it on my mech.... MUCH BETTER!! Sucks down more juice than a school full of rugrats though!

 

[FallenSuperHero]

The .8 ohm coils wick like ...., does anyone know someone that rebuilds the new kanger coils? Id love to buy 10-20 at sub ohms with cermaic wick.