a good rebuild able clearomizer

[orrzxz]

Hi,
i recently purchased an Ego Twist starter kit, and i heard that they dont produce much vapor, plus if im right, they are not rebuild able, which means every time the coil is done - i need to buy another clearomizer.
so, i wanted to ask you if you have any suggestions for a clearomizerwhich which is both rebuild able AND produces nice amounts of vaper.
Thanks,
orrzxz

 

[drummerskey]

It depends on what topper you have on whether you have to throw them away and buy a new clearomizer. Some just require a replacement coil like an EVOD, Protank, any of the Aspire products to name a few.

Additionally, I know that lots of people rebuild a Protank but unless you like to tinker, are an electrician, an electronics professional or an engineer; you should do some reading before taking on a rebuild. You will need more items to successfully build coils like Kanthal wire, an ohms meter, a wicking material of choice and something that will measure the diameter of the coils. Plus, re-building something that isn't really designed to be rebuild can be challenging with the area you have to work with.

If you really want to rebuild, you should look into some RBA (rebuildable atomizers)

 

[orrzxz]

It depends on what topper you have on whether you have to throw them away and buy a new clearomizer. Some just require a replacement coil like an EVOD, Protank, any of the Aspire products to name a few.

Additionally, I know that lots of people rebuild a Protank but unless you like to tinker, are an electrician, an electronics professional or an engineer; you should do some reading before taking on a rebuild. You will need more items to successfully build coils like Kanthal wire, an ohms meter, a wicking material of choice and something that will measure the diameter of the coils. Plus, re-building something that isn't really designed to be rebuild can be challenging with the area you have to work with.

If you really want to rebuild, you should look into some RBA (rebuildable atomizers)

i don't want to create my own coils, all i want is to be able to just replace them with ones i buy. which if i understood correctly, i cant do that with the clearomizer I'm getting with my starter kit.

 

[Paulette]

A CE5 atomizer, an I-clear, a protank, an aspire are all ones you can buy and replace.

 

[orrzxz]

A CE5 atomizer, an I-clear, a protank, an aspire are all ones you can buy and replace.

i checked again the Ebay page of the product, and apparently it DOES come with a CE5 clearomizer. so.. i guess all i have left is to buy high resistance coils and vape at 4.8 to get some nice amounts of vape? (im a noob, but by common sense i think this is what i need to do to get the most amount of vape.) (P.S. sorry for bad english)

 

[BeRight]

i checked again the Ebay page of the product, and apparently it DOES come with a CE5 clearomizer. so.. i guess all i have left is to buy high resistance coils and vape at 4.8 to get some nice amounts of vape? (im a noob, but by common sense i think this is what i need to do to get the most amount of vape.) (P.S. sorry for bad english)

I have found that one of the most contributing factors to cloud production is the use of more VG in your e-liquid mixture. More VG more vapor - more PG more throat hit.

 

[Timactionfigures]

i checked again the Ebay page of the product, and apparently it DOES come with a CE5 clearomizer. so.. i guess all i have left is to buy high resistance coils and vape at 4.8 to get some nice amounts of vape? (im a noob, but by common sense i think this is what i need to do to get the most amount of vape.) (P.S. sorry for bad english)

You'll want to go with low resistance coils...like 1.5 to 2.0 ohm. That way it doesn't require as much voltage to reach a higher wattage (power) at the coil. Use the formula: P(watts) = V^2/R. The higher resistance coil you use, the more voltage required to increase watts.

With that said...make sure you get the correct replacement coils. There are several out there for CE5's and they are not all compatible. Pay attention to the shape of the bottom of the coil (where it screws into the post)...some are flat, some are a dome shaped. I've heard all to often of folks getting the wrong ones.

 

[orrzxz]

I have found that one of the most contributing factors to cloud production is the use of more VG in your e-liquid mixture. More VG more vapor - more PG more throat hit.

I bought an 0mg bottle. Again, im a noob, but I guess that says it has more VG than PG?... I dont know. My first ever vaping device was a smooth e cig (or as they say it - e hookah) and it had no nicotine and no throat hit at all. Thats what im basing what I wrote on.

Sent from my GT-I9100 using Tapatalk

 

[2naphish]

i would stay in the the 2.0 - 2.5 ohm area for an ego battery. you will get a decent amount of vapor, throat hit and in general better battery life than a lower ohm coil. higher ohms = longer battery life but less satisfaction in my opinion. if you are not satisfied with a standard clearomizer i suggest the Evod as a topper. best of luck and hang in there...

 

[orrzxz]

i would stay in the the 2.0 - 2.5 ohm area for an ego battery. you will get a decent amount of vapor, throat hit and in general better battery life than a lower ohm coil. higher ohms = longer battery life but less satisfaction in my opinion. if you are not satisfied with a standard clearomizer i suggest the Evod as a topper. best of luck and hang in there...

ok.. it says that the clearomizer it comes with has a 2.1-2.8 ohm coil... what?
anyway, i thought about buying one of these:
DBOX PuriTank - Pyrex Glass 4.0ml Bottom Coil Clearomizer (BCC) Tank - MyFreedomSmokes.com
it has a bottom coil, which is nice, but i cant actually see it fitting the look of the Ego battery.
Kanger UniTank Mini Bottom Coil Clearomizer (BCC) - MyFreedomSmokes.com
I think its my favourite, bottom coil + if i understood it correctly, i can switch coils when this one is done.
Smok 510 Single Coil Cartomizers XL (5pk) - 1.7 ohm Low Resistance - MyFreedomSmokes.com
This one doesnt have a bottom coil, but i imagine it attached to my ego and it looks amazing. it completes the look. plus, its a 5 pack. which means i have enough for a while.
so, do you have any suggestions what to pick from all of these?

 

[coalyard]

Hi,
i recently purchased an Ego Twist starter kit, and i heard that they dont produce much vapor, plus if im right, they are not rebuild able, which means every time the coil is done - i need to buy another clearomizer.
so, i wanted to ask you if you have any suggestions for a clearomizerwhich which is both rebuild able AND produces nice amounts of vaper.
Thanks,
orrzxz

EGO twist? Hard to go wrong with a ProTank mini. Same heads as a PT2, and easy to rebuild. If you do it right, they are really great.

 

[orrzxz]

EGO twist? Hard to go wrong with a ProTank mini. Same heads as a PT2, and easy to rebuild. If you do it right, they are really great.

after learning a little bit more, i understood that rebuildable... isnt what i meant. i meant being able to change the coils when its done, so i wont need to just buy another clearomizer.

 

[SleeZy]

I see that you're from israel.
I just wanted to tip you for a great juice vendor.

Check out Yaeliq if you haven't.
Since you're from israel the delivery will be darn fast.

As for tanks, i'd suggest pro tank 2 mini (I always use my without problems, 1.8ohm coils are my fav.) You just either change the coils or if you ever would want to, you can rebuild them.

 

[coalyard]

after learning a little bit more, i understood that rebuildable... isnt what i meant. i meant being able to change the coils when its done, so i wont need to just buy another clearomizer.

OOps! Well, the advice still applies then. When it starts to taste bad or leak, unscrew the bottom where you fill it, unscrew the head from the base and toss it. Screw in another head, put the bottom back on. Take a couple of hits without firing to prime it, then vape. Easy peasey...

 

[orrzxz]

I see that you're from israel.
I just wanted to tip you for a great juice vendor.

Check out Yaeliq if you haven't.
Since you're from israel the delivery will be darn fast.

As for tanks, i'd suggest pro tank 2 mini (I always use my without problems, 1.8ohm coils are my fav.) You just either change the coils or if you ever would want to, you can rebuild them.

THANK YOU! Waiting 3 weeks min for the juice to arrive is... some what annoying

OOps! Well, the advice still applies then. When it starts to taste bad or leak, unscrew the bottom where you fill it, unscrew the head from the base and toss it. Screw in another head, put the bottom back on. Take a couple of hits without firing to prime it, then vape. Easy peasey...

Thanks! I will probably purchase it soon!


Sent from my GT-I9100 using Tapatalk

 

[orrzxz]

OOps! Well, the advice still applies then. When it starts to taste bad or leak, unscrew the bottom where you fill it, unscrew the head from the base and toss it. Screw in another head, put the bottom back on. Take a couple of hits without firing to prime it, then vape. Easy peasey...

sorry for the double-post, but the edit button... doesn't work for some reason.
can you please link me to this clearomizer? Its out of stock on MyFreedomSmokes, which is the only sight i know that ships internationally atm.