A question about the Kanger Subtank Mini RBA

[graywoulf]

I know that this question should be posted elsewhere but I figured that I would get an answer here quicker. I just got my first Kanger Subtank Mini and I would like to know (since I am new to this) how to build a coil for the rba that came with it to have a 1 Ohm or slightly higher resistance. I also have not found any information about using this coil with the tank. Does it work just like the OCC's that came with it? I ask this because the RBA does not have the large holes like the OCC's do. I did find several vids on YouTube about how to build coils and also how to rebuild the OCC's but nothing was specific to building a coil for the RBA so that I can use it with my Vamo V7 mod which is rated down to only 0.8 Ohms. Thanks in advance for any help on this subject.

 

[Vicshalls]

RIP tripper has a video on the RBA. I just got the full size and I have not rebuilt it yet. Was planning on trying it his way. Looks pretty easy but then again I don't use heavy VG liquids.

 

[thomas l]

Maybe this would help
https://youtu.be/T8rO6PoMgU4

 

[Robert Cromwell]

I like Rips videos with the sound turned down

 

[Yorkshire_pudding]

I have not used the RBA section yet. It seam some are having more luck than others with it and some have opened up the juice channels a bit.
Rip tripper has a vid for the ST RBA and im sure i found a couple more on you tube but i can not remember the names.

As for making the coil i use ( Coil wrapping | Steam Engine | free vaping calculators ) to help calculate how many wraps of what gauge wire for a certain diameter to give my desired ohm coil at the end.

 

[Rizzyking]

Find a screwdriver or similar with the diameter you want your coil at and then 6-7 wraps of 28awg put you near the one ohm. If you want to make coils easier look at buying a coiling jig or a kuro coiler type tool. Also get an ohms checker to make sure your coil is ok and will also help fine tune your coils to exactly what you want. I use 50\50 pg & vg and the standard juice flow has been perfect never had a dry hit, wicking is the important part get that sorted and the rest will come with a little time and patience it's not that hard good luck with it gives a great vape .

 

[sonicdsl]

Moved to Clearomizers Forum