About to order....a few last minute questions

[Taylor7617]

Okay, had everything in my cart this morning and thought I had better check with the local experts to see if I was missing anything and ask a couple last minute questions.

Order:
LP Grand
LP Reomizer
Aluminum button cover
Extra O-ring (1.5mm x 10mm)
Extra 6ml Bottles E
xtra Post screws (2 piece set)

Questions:
1) Recommend another spring just in case?
2) Black Delrin Button cover; is this just like the aluminum cover but black? I only ask b/c the site picture doesn't look black.
3) Is there a special feed tube for 6mls? I only see the 3ml or does this only come as a set (6ml bottle & tube kit)?
....thinking it might be wise to have extra feed tubes to prevent flavor blending. I know many dont mind but i dont think it would be good to go from custand/danish to say mint/licorice/cinnamon. Trying to think ahead and get it all on 1 order.
4) Anything I might be missing? Maybe a full repair kit?


Note, this will be my FIRST Reo purchase. Thanks for the guidance
~Mike~

 

[jthomas143]

1. Always good to have an extra spring in case you have a short, so you don't have a down Reo
2. I assume the black cover is exactly the same. I guess it's personal preference. I went with aluminum cuz it matches the reomizer
3. I ordered an extra bottle tube kit just to have but word is most juice flavors are held in the oring in the bottle cap
4. Order looks pretty good, get the spring or order the full repair kit so you have spares.

Sent from my SM-G900V using Tapatalk

 

[ancient puffer]

Okay, had everything in my cart this morning and thought I had better check with the local experts to see if I was missing anything and ask a couple last minute questions.

Order:
LP Grand
LP Reomizer
Aluminum button cover
Extra O-ring (1.5mm x 10mm)
Extra 6ml Bottles E
xtra Post screws (2 piece set)

Questions:
1) Recommend another spring just in case? I would just add a repair kit, it contains the spring and gives you backups for everything.
2) Black Delrin Button cover; is this just like the aluminum cover but black? I only ask b/c the site picture doesn't look black. Yes, it's really black
3) Is there a special feed tube for 6mls? I only see the 3ml or does this only come as a set (6ml bottle & tube kit)?
....thinking it might be wise to have extra feed tubes to prevent flavor blending. I know many dont mind but i dont think it would be good to go from custand/danish to say mint/licorice/cinnamon. Trying to think ahead and get it all on 1 order. I *think* you can order the feedtube separately, but I've never ordered one, so can't say for sure.
4) Anything I might be missing? Maybe a full repair kit? Couldn't hurt, although I've been using REOs since 2011 and haven't needed one yet. I assume you have a multimeter or some device to measure resistance/check for shorts.


Note, this will be my FIRST Reo purchase. Thanks for the guidance

Do yourself a favor and get the recommended AW IMR 18650's in 1600 mAH. The batteries really DO make a difference. RTDVapor is where many of us get them.
~Mike~

Welcome to REOVille, remember, if you post pictures when you get it, you get an official badge, lullaby from the fat lady, and the welcoming committee will fill you in on such niceties as which day for garbage pickup, etc. Also be sure to add yourself to the REO Roll Call thread, we love to see the numbers grow. And as always, if you have any questions, ask away, we love to help.

 

[super_X_drifter]

Order looks solid. Definitely grab atleast one spring. Congrats and welcome fellow micro cooler

 

[Raynman]

Yeah what they said^^^^^

Also for batteries RTD also has pannies sony's and the 35 amp Efest if you wanna get all silly with it.

 

[glasseye]

The extra bottles don't have the top cut out, it's just a screw top cap. The only thing I see missing is another Reo. Then you don't have to fool around with that changing flavors thing.
(I did get extra feed tubes in my last order)

 

[Fizzpop]

+1 on the extra spring. I ordered my REO just recently, unfortunately, the repair kits were out of stock.

Welcome to Reoville! (I'm still astonished by the community here, I should have ordered a REO months ago...)

 

[B2L]

Don't worry about getting it all now, you'll be ordering again soon anyway

I would throw in a few extra magnets too.

 

[WileECoyote]

Looks good. Add the spring and pull the trigger. Which LP are you getting?

 

[Taylor7617]

Thanks all..........probably just get a plain black wrinkle but really wavering on a Silver Vein. Good grief....decisions, decisions!

Rob doesn't have any colors yet for the LP's but he did say door changes were easy so that adds to my confusion, LOL.


What do you all think, maybe a second RM2 to experiment on coil builds for quick swaps?
Also, notice RTD has Igo's ....was thinking for dripping & testing juices. Any of these work well?

Much appreciated
~Mike~

 

[jkais3r]

Heck, if you have a B&M nearby igo's should only be $15 or less. Then when you decide you want that to be a BF igo, just look around on here there are a few posts explaining how to convert rda's to BF rda's If you're worried about magnets I bought 50 1mmx4mm off of ebay for like $5 or 6. Exact same size, but be careful it took me a good day or two to find ones I knew were the same.

I have 2 grands and 4 BF rdas. 2 RM2'S, one ERA, one Cyclone. Vape-wise there's no difference really. The ERA and cyclone might drain better but that's about it.

I think if you pm rob or email him asking about extra doors he should be able to do that for you. I haven't bought extra besides blemishes, but I think non blems are $20ea. Correct me if I'm wrong someone, only have heard that price before.

 

[patrao_n]

So they are 1x4mm magnets?

Sent from my SM-N900T

 

[jkais3r]

Yes. I could not find a size in inches that was the same. 1X4MM. Robs are n52, but I don't think there's much of a difference as long as they have an N rating.

 

[Taylor7617]

CRAP ...............got busy over the weekend and never got around to ordering. Come last night and had some time on the PC - went to the site and the LP's were all OOS. Son-of-a-!!!!!!!!!!!

Okay, time to stalk his site again and not wait.

Oh, and it would make the refreshing much easier if the mini's were on a separate page from the LP's lol. I see 'BUY NOW' and then notice it's not the full size. Frustration has set in.


The wife and I are flavor junkies and thought about getting this REO and a new RBA to compare/contrast. Every thread I read appears to be looking good, then a turn the page and find a dozen complaining about leaks or something else. So, spend $40+ on a clone and get good vape or $100+ with a bit better machining just to hold 3-5ml. Problem is these have PLASTIC tanks and replacement glass in still only minimally available but the upgrade cost is more than the damn clone atty price. I'm hopeful this REO works as well as I've dreamed about. If so.........everything else is getting SOLD and replaced.

Okay, rant is over.............time to go back and stalk his site again.

~Mike~

 

[muzichead]

Right now there are a few LP's that are available...

http://www.reosmods.com/index.php?p...category_id=37&option=com_virtuemart&Itemid=3 6 in stock LP TRA
http://www.reosmods.com/index.php?p...category_id=37&option=com_virtuemart&Itemid=3 2 in stock LP Hammertone/Black Wrinkle
http://www.reosmods.com/index.php?p...category_id=37&option=com_virtuemart&Itemid=3 4 in stock LP/SL Black Anodized

 

[Taylor7617]

I was leaning towards a complete Black Wrinkle to start with........but if nothing shows up soon, I may just go with the Hammertone/BW door just to get one in my hands.

 

[malkuth]

I was leaning towards a complete Black Wrinkle to start with........but if nothing shows up soon, I may just go with the Hammertone/BW door just to get one in my hands.

Just PM Rob (Redeyedancer) and he will set you up as soon as he has stock. I just submitted a "want list" to him, and am waiting for him to get the parts in and invoice me. Most of what I am asking for is out of stock on the web site.