AC9 Genesis Atomizer Pricing & Breakdown!

[RiPTrippers]

yankeebobo, the reason why plastic tanks crack is because of the tension and stretching from the o-rings. Our tank system does not require o-rings, which means no cracking or tension on the plastic.

 

[bappo]

Can't wait! hey Rip, will I have to take care on positioning and such to prevent leaking like PBusardo did on the ZAP?

30g 6 wrap? This will be the first for me, like a virgin if you will

 

[RiPTrippers]

bappo, any Geni is going to have juice flow out of the top if you turn it upside down. I highly recommend 28 gage 5/4 wrap at around 1.2 ohms on a Provari V2 or 28 gage 4/3 wrap on a mechanical mod. Best vape in my opinion.

 

[yankeebobo]

yankeebobo, the reason why plastic tanks crack is because of the tension and stretching from the o-rings. Our tank system does not require o-rings, which means no cracking or tension on the plastic.

I am eager to test the unit. I'm excited for tonight as mine should be in my hands tonight.

bappo, any Geni is going to have juice flow out of the top if you turn it upside down. I highly recommend 28 gage 5/4 wrap at around 1.2 ohms on a Provari V2 or 28 gage 4/3 wrap on a mechanical mod. Best vape in my opinion.

Rip, what size mesh are you sending in with the AC9s? This is both the mesh hole size and the cut length size you use in your pre-mades. I'm certainly likely to experiment with different lengths of mesh through time, but curious on default.

 

[wanttoknow1]

can someone explain or tell me where to go to find out what 5/4 wrap is vs 4/3 wrap
thanks

 

[spraintz]

look at a spiral wrapped coil.........from one side it will look like 5 coils......from the other side it will look like 4 coils. its just a more accurate terminology for deceiving the wraps of a coil.