adapters for the smokeless image volt spinner..help please

[Sly_fox]

Hello everyone!

just a quick question..i bought a volt spinner which i love..all raninbows and have recently order mini vivi nova and a kanger t3. well i thought the extra threads they put on those spinners would have fix but nope..as far as looking i just keep finding 808/510 adapters for atomizers (i believe those are the numbers for the spinner threads and nova/kanger) with two female ends..im lost and would really appreciate any advice/links. im in adapter hell ...id rather not go buy a new batt if it can be avoided.


thanks in advance!


anyone?

 

[klynnn]

adapters for different thread types. The first number is for the batt and the second for the atomizer/nova.

 

[Sly_fox]

thanks for the reply! so you think the 801 would work? im lost on all these different types of threading.

 

[klynnn]

I think the 901/808 to 510 would work the best on the volt batt. I don't use those but last I heard they were 808's.

 

[Sly_fox]

thank you so much klynnn

 

[klynnn]

I would also get the 510 to 808 just to have on hand then you will be able to use the volt carts etc if you decide to get a 510 batt. I started with the 808 in v2 and quickly went to 510 for all my equip. I can order from just about any supplier and I like to hit the sales.

 

[LKnives]

Have you tried just using the Kanger T3? I know my Kanger T3 works on my Volt X2 with no issue. (Not that I use it like that mind you, I was just curious)

 

[Sly_fox]

klynnn, im all about the sales too lol i want to get a different ego batt some day..all my funds went to "finding out what juice i like" boy that was a treat. now im looking into diy stuff


knives, for some reason it will not screw onto the spinner, i dont have the x2.

 

[klynnn]

It takes awhile to get set up I work at it little by little. Diy is a lot of fun and the diy eliquid section of the forum is well worth spending time on. I rarely buy vendor juices anymore. I love the vivi novas they take a bit to get used to but are very cost effective in the long run. A PBusardo Tutorial - Vivi Nova Cleaning & Rebuilding - YouTube

 

[mullet]

SI sells their own version of the T3 called the X2T3 that has the "eGo threads" but also an 808 connection inside. The Spinner and X2 are threaded the same and both will work with the SI X2T3. If you have any other T3 that is not "made"/sold by SI, you have an eGo threaded T3 with a 510 battery connection that definitely will not work on your SI Spinner. SI does however sell replacement heads to fit your Spinner that should work fine in the T3 tank you already have.

Smokeless Image | The Best Electronic Cigarette

 

[Sly_fox]

he makes it look so easy doesnt he lol that is my goal..to make rebuilding them look that easy. i still have vape mail rolling in with different juice flavors..as soon as i got my SI volt kit i stopped smoking 2/7/13..2 1/2 pack a day habit. im getting there ..sooo much to learn! love that guys video thou..his reviews pointed me toward ordering the kanger t3

 

[Sly_fox]

i had checked those out when they came in but it seemed the first few reviews were iffy so thats why i had went with kanger t3, they must have changed up something because the reviews are alot better.

 

[Plaz]

SI sells their own version of the T3 called the X2T3 that has the "eGo threads" but also an 808 connection inside. The Spinner and X2 are threaded the same and both will work with the SI X2T3. If you have any other T3 that is not "made"/sold by SI, you have an eGo threaded T3 with a 510 battery connection that definitely will not work on your SI Spinner. SI does however sell replacement heads to fit your Spinner that should work fine in the T3 tank you already have.

Smokeless Image | The Best Electronic Cigarette

Wait, so you're saying that even though the Volt X2s and Spinners have an eGo thread (in addition to the 808 thread), eGo-threaded Kanger T3s not sold by SI will NOT fit on an X2/Spinner?