advice please

[ilovetigers100]

hi guys/ girls i am new to vaping and have got a itaste svd i have just ordered the kangertech sub tank mini and would like to know what setting i should use to get a good vape cloud and good taste any advice would be great thanks

 

[Ben85]

We need more info.

What coil are you using for a start?

 

[Topwater Elvis]

Same as any delivery device you'll ever use, start off at a low power setting & work your way up until you find what you're looking for.

The svd won't fire resistances lower than .8Ω ~ 1Ω ish.

 

[Hitmetwice]

Watching PBusardo, can't hurt

pbusardo

 

[CLOUDKICKER]

probably consider starting off low and then start bumping up the wattage. have fun experimenting with it!

 

[ilovetigers100]

thanks guys for all the information the coils included are
1 x OCC Sub 0.5 Ohm/Range 15-30W
1 x OCC Sub 1.2 Ohm/Range 12-25W
i will enjoy testing and will use the advice thanks again

 

[Eskie]

thanks guys for all the information the coils included are
1 x OCC Sub 0.5 Ohm/Range 15-30W
1 x OCC Sub 1.2 Ohm/Range 12-25W
i will enjoy testing and will use the advice thanks again

Manufacturer's sometimes (always) inflate the wattage power on their coils (I guess folks like to buy things with higher ratings). In both cases, after priming the coil and filling the tank, allowing it to sit for about 10 minutes to be sure the cotton in the coil is well saturated, start off vaping well below those "minimums", which they're not. You can run a coil as low as you want. Might not produce much vapor, but you won't damage it. Doing it this way allows you to avoid a dry hit, or the awful taste of burning cotton (trust me, it tastes really awful), which will happen if you try to vape a dry coil or use too much power.

For the 1.2 ohm, I'd start out around 7W, and raise it by 1 to 2 W after a hit until you get the vapor, flavor, and warmth you like best, usually called the "sweet spot". Might be at 12W or 20W, which is why you do it this way. Hit it with 30W on the first vape and you will probably be very unhappy.

For the 0.5 ohm, start round 12W. You will end up with a higher wattage with this coil as you find your sweet spot.

 

[ilovetigers100]

thank you for the advice will give it a go

 

[ScandaLeX]

hi guys/ girls i am new to vaping and have got a itaste svd i have just ordered the kangertech sub tank mini and would like to know what setting i should use to get a good vape cloud and good taste any advice would be great thanks

Welcome to the forums & Congrats on vaping!!!

 

[Hitmetwice]

If in fact the lowest resistance coil the SVD will fire is 0.8 ohm
(which is likely)
The 0.5 ohm coil will be useless to you. Install the 1.2 ohm coil before use. You may be able to trade the 0.5 with someone if it's unused.
They are a more popular coil giving more performance. Your SVD cannot push the power it needs. Cheers.

 

[smacuser]

 

[ilovetigers100]

thanks all