Okay so I have three 510 atomizers and two 901 attys and just today all of a sudden all five of them started dropping in vapor. I mean these things used to chuck out the vapor like crazy and they all started producing less at the same time which is really weird to me. To get a decent cloud of vapor I have to pull on it really hard. I'm not using carts btw. Could this be my batteries? Maybe there was a surge while charging them or something? Help?
All 5 atomizers all of a sudden drop in vapor production
- Thread starter Xanax
- Start date
- th_trl_thread_readers 0
- Status
Well just by process of elimination, if all five started it at the same time, the only variables left are the juice or the battery. If you have a spare battery (most kits that I see come with two) then try a different battery. If you changed juice, it could be that. I just bought some juice that doesn't make very good vapor and I find I really draw much harder just to get any vapor.
Okay I need your help. I've determined it's my screwdriver that's screwing up. I put all five atomizers on my little 510 battery and they work like a charm! So what do I do now?does this mean that my screwdriver's BATTERIES are the problem or is there an actual connection problem in the body itsself??? I have not dropped it FYI. Help!!! I'm losing my mind over this
If you have a voltmeter, this will be easy to check. If not, I recommend going out and buying a digital multimeter that does VDC (voltage DC) and ohms.
Sounds to me like dirty contacts on your Screwdriver. Try cleaning where the attie screws in plus the threads on both parts of the body of the SD.
How do I clean where the atomizer screws in to the body? It's pretty much impossible to get in there, I have the MKII and a Q-tip/cotton bud won't fit in there. You are probably right though. Is there a really good way to clean it out thoroughly?
Where is a good place to buy one? And do you know about how much they run ($)?
Thank you all for the replies and help, seriously. Idk what I would do without ECF.
The best thing to use is a small piece of card - the corner of a business card for example. Then also wipe with some kitchen roll.
Any radio shack, tool store, or wal-mart. It's been awhile, but I'm pretty sure you can get one for about $10 or less.
Clean the contacts with some rubbing alcohol where the atty screws on...you MUST be able to get a Qtip down there if the atty can screw onto it? 
Hey everyone I just wanted to let y'all know I fixed it. It was the spring in the switch, it had been smashed down and I pulled it back out and it works like new again so if anyone has a screwdriver or a mod that has a spring switch and it stops working check the switch it might just be the spring! And also I cleaned it out and it was pretty dirty as well. Anyways thank you all for the help.
so if anyone has a screwdriver or a mod that has a spring switch and it stops working check the switch it might just be the spring! And also I cleaned it out and it was pretty dirty as well. Anyways thank you all for the help.
- Status
Similar threads
