No, he's been busy w/ another non vaping related project. I'm sure he'll be back on this one when time allows. In the meantime, we're building Genisis atty's over at 'jen's thread.
- Status
No, he's been busy w/ another non vaping related project. I'm sure he'll be back on this one when time allows. In the meantime, we're building Genisis atty's over at 'jen's thread.
Sorry, this is a google translation from my post in the german forum. I hope you can understand it.
Surprising discovery
or: Where the dirt is in the evaporator
The last days I have yet again brought something with my new evaporator type. Above all I wanted to know how fast it dirty.
So that the outcome is objective, I have real liquid evaporates. Hence it is objective, I have drawn by an electric air suction pump the air and not by suck.
Results:
a) After about 100 ml of liquid was the vaporizer dirty.
b) After about 180ml of pure PG was contaminated, the evaporator similar extent, only brighter.
a) is clear. In liquid, it has obviously not vaporize remains that bear himself.
b) is unclear, because pure PG should make no residue.
So far I've always assumed that the pollution is caused solely by the liquid.
This has left me with the PG no silence.
If it is not a PG, it can come only from the air, so my theory. So I repeated the setup with PG, but made a fine dust in the air inlet filter FFP3.
And lo and behold. PG for 200ml of the evaporator looked almost like new.
I am flabbergasted blink on my own result
Obviously, causing house dust and fine dust much of the deposit!
A picture from a real used atty (not a genisis)
Raidy says: 60% of this are house dust
Now I'll test again with the whole real Liquid.
So, that right now a progress report. Now come back but only once other priorities.
You would have thought it possible?
Surprising discovery
or: Where the dirt is in the evaporator
The last days I have yet again brought something with my new evaporator type. Above all I wanted to know how fast it dirty.
So that the outcome is objective, I have real liquid evaporates. Hence it is objective, I have drawn by an electric air suction pump the air and not by suck.
Results:
a) After about 100 ml of liquid was the vaporizer dirty.
b) After about 180ml of pure PG was contaminated, the evaporator similar extent, only brighter.
a) is clear. In liquid, it has obviously not vaporize remains that bear himself.
b) is unclear, because pure PG should make no residue.
So far I've always assumed that the pollution is caused solely by the liquid.
This has left me with the PG no silence.
If it is not a PG, it can come only from the air, so my theory. So I repeated the setup with PG, but made a fine dust in the air inlet filter FFP3.
And lo and behold. PG for 200ml of the evaporator looked almost like new.
I am flabbergasted blink on my own result
Obviously, causing house dust and fine dust much of the deposit!
A picture from a real used atty (not a genisis)
Raidy says: 60% of this are house dust
Now I'll test again with the whole real Liquid.
So, that right now a progress report. Now come back but only once other priorities.
You would have thought it possible?
Last edited:
It's more than surprising. It's very interesting to improve the quality of the system and further improve the healthy.
Raidy, what is FFP3 ???
Raidy, what is FFP3 ???
It's a european standard for air filters. A FFP3 filters at least 99% of airborne particles.
Look here: Respirator - Wikipedia, the free encyclopedia
Understood, thanks.
Raidy, I dont want to be insistent or be annoying but when you can, please, read this question:
http://www.e-cigarette-forum.com/fo...e-homemade-attys-genesis-244.html#post2701658
That question, in fact, I should have done in this thread.
Raidy, I dont want to be insistent or be annoying but when you can, please, read this question:
http://www.e-cigarette-forum.com/fo...e-homemade-attys-genesis-244.html#post2701658
That question, in fact, I should have done in this thread.
Most people have no idea how much airborne particulate is in their home. Often people are shocked when they get an air ionizer and all of a sudden everything is covered in dust.
That is amazing Raidy .
And also is the fact there is that much in the air . Not much can be done about it I guess besides knowing that some of it didn't make it in to My lungs . So another reason to vape ha ha . You must be really busy we have wondered how your new Mod is doing . Can you post some of your finding on it and where its gong .
Thanks Dan
And also is the fact there is that much in the air . Not much can be done about it I guess besides knowing that some of it didn't make it in to My lungs . So another reason to vape ha ha . You must be really busy we have wondered how your new Mod is doing . Can you post some of your finding on it and where its gong .
Thanks Dan
Hmmm . . . being that household dust is composed of a majority of dead skin cells, mattress and clothing fibers, and particles of everything else in your house . . . I'm thinking:
HEPA Filter Mod!!
good to see you back raidy. Just wanted to take a second to thank you for all the work you are doing in multiple areas of the vaping world. This is all relatively new for us and you have obviously begun to shed light on the areas that we all have been stumped by. Thank you for sharing your research and intelligence! Much respect.
I would second that. Thank you Raidy!
I'm glad someone does some scientific research into this subject.
This is a quick pic of my wick after three days of vaping. I have increased the airflow dramatically as you can see. 5 inlet holes all around the wick. It seems to hold up quite nicely.
But no HEPA filter.....
Will take a close-up pic after 5 days and compare results.
But no HEPA filter.....
Will take a close-up pic after 5 days and compare results.
Raidy, I wanna thank you to share your knowledge with us. Because your generosity I made excelent mod with Genisis atty integrated. I call him Hybrid. 40 Hybrids and 10 bodys for Genisis I was send to users around a world and almost all is very, very satisfied. Some of them can't find right setings for Genesis and I try to help him to resolve their problems.
Never before I wasn't feel such a pleasure as now with atty like this.
Thanks again.
Never before I wasn't feel such a pleasure as now with atty like this.
Thanks again.
thank you Raidy and peace, that is some great work. i have been reanding this thread most of the night, very informative. thanks again.
i am going to make a genesis, i will start with the cork from the wine bottle method. i have checked for supplies that i need and found that they will take a while before i get them. If it isn't too much to ask for, if someome has some axtra (4in.x4in) 400 stainless steel mesh and a 3in, piece of Kanthal wire you could sent me , i would be eternaly greatful. send me pm. thank you
the need has been met , ty.
i am going to make a genesis, i will start with the cork from the wine bottle method. i have checked for supplies that i need and found that they will take a while before i get them. If it isn't too much to ask for, if someome has some axtra (4in.x4in) 400 stainless steel mesh and a 3in, piece of Kanthal wire you could sent me , i would be eternaly greatful. send me pm. thank you
the need has been met , ty.
Last edited:
This is a very interesting discovery Raidy.
Curious to see also test results using a commercial eliquid instead of plain PG.
Last edited:
ty for the re ply Raidy
i am all set ,
i dont need the material , i got some coming to me.
i am all set ,
i dont need the material , i got some coming to me.
Quote : - "Raidy says: 60% of this are house dust
Now I'll test again with the whole real Liquid.
So, that right now a progress report. Now come back but only once other priorities.
You would have thought it possible? "
I Just had to reply to this .thats a VERY suprising result .Did u do the tests on real liquid yet. ?
I like almost every one else was assuming all the deposits was from the eliquid .If what u say is correct
then a simple air filter on air inlets would greatly increase the life of evaporating elements .
Now I'll test again with the whole real Liquid.
So, that right now a progress report. Now come back but only once other priorities.
You would have thought it possible? "
I Just had to reply to this .thats a VERY suprising result .Did u do the tests on real liquid yet. ?
I like almost every one else was assuming all the deposits was from the eliquid .If what u say is correct
then a simple air filter on air inlets would greatly increase the life of evaporating elements .
- Status
Similar threads
- Locked
