Am i doing this right?

[NoSoupfOu]

I have 1300 Halo Triton batteries and I want to try kanger protank. If i purchase 808 to 510 adapter from mount baker Vapor and then buy the kanger protank it should work right?

I asked this in couple other threads but I'm still unsure and i don't want to make a purchase that I cannot use lol.

What would be the best ohms for a non VV battery? 1.8 or 2.5? (Those are the only ones MBV offers)

 

[steved5600]

As long as you end up with a 510 thread. But. The protank is big. Depending on what version you get it may or may not be prone to breakage of the glass or base. If possible use the adapter cone that comes with it as it will support the protank. It's not just for looks. If your mod is 3.7 volts then the 1.8 ohm will get 7.61 watts which I find to be more than sufficient. I find that I don't need high wattage for that tank. 2.5 ohms will only give you 5.48 watts which is not bad for that system.

 

[SissySpike]

You are correct 808 to 510 will get you to the proper threading for a pro tank I would say a 1.8 OHM coil if your using the un regulated on non VV Triton if its adj voltage it really docent matter.

 

[NoSoupfOu]

As long as you end up with a 510 thread. But. The protank is big. Depending on what version you get it may or may not be prone to breakage of the glass or base. If possible use the adapter cone that comes with it as it will support the protank. It's not just for looks. If your mod is 3.7 volts then the 1.8 ohm will get 7.61 watts which I find to be more than sufficient. I find that I don't need high wattage for that tank. 2.5 ohms will only give you 5.48 watts which is not bad for that system.

Thank you very much. Very much appreciated.