Ammit 25 RTA
- Thread starter Gallant
- Start date
- th_trl_thread_readers 0
- Status
I don't know about the o rings but I can help you with the other two issues.
Since you are just starting out. Just get a roll of Geekvape 316L Stainless steel 26guage wire. And a simple Clapton roll, Geekvape has 26/32g Clapton, the 26g is the inner core and is wrapped with 32g wire. That is enough to get you started. Once you are more experienced you can delve into the more exotic coils/wire.
The burp is usually used with rta's that don't have juice flow control, the Ammit 25 has juice flow control so you don't need to burp it. But I will tell you how,
1. Close airflow (juice flow too even though you don't need to burp tanks with jfc)
2. Full tank with juice
3. Screw top cap on (some say just until the threads catch) I screw on
4. Flip tank upside down
4a. Allow juice to flow all the way down.
5. Open airflow control (jfc)
6. Flip tank back upright
7. Vape
I just watched straight vapes on youtubes video that helpes so the higher the number smaller the wire kind of like piercing jewellery
What i dont get is the 3.5 mm stuff is that from the jigs that come from the diy kit?
Hopefully this thing ships on the 20th and my two .4 coils in my tfv8 last till then this ethos crispy treats stuff is a coil killer and im saving my mystic magic till the rta comes in
I think im just get the fused clapton 26g 32 ga roll to start anyone got a link?
What i dont get is the 3.5 mm stuff is that from the jigs that come from the diy kit?
Hopefully this thing ships on the 20th and my two .4 coils in my tfv8 last till then this ethos crispy treats stuff is a coil killer and im saving my mystic magic till the rta comes in
I think im just get the fused clapton 26g 32 ga roll to start anyone got a link?
Yes the higher the number the thinner the wire & the higher the resistance.
Once you get your coilmaster kit you will understand. The kit comes with coil jigs in 6 sizes. 2 mm id-4mm id = inner diameter. It determines the inner diameter of the wire. So 2mm id will give you a smaller diameter coil. Let me do a search for some Geekvape Claptons, will be back.
You can dry burn the coils you have & rewick them until your stuff comes in.
Edit: nevermind I think you're using stock coils.
Here's a link
Clapton Wire Spools by GEEKVAPE – VAPEHAPPY
You don't have to buy it there but it's so you know what it looks like. The first choice is the 26/32 g Claptons we were talking about.
Will order that or just go get some premades when my order comes going to be a looong wait 
my smok coils gunna have to last
my smok coils gunna have to last
Recently had my car window broken into and they took my cuboid and pharaoh RTA. Just put my order in for Sigelei Kaos and Ammit 25. I hope this is a good tank.
I've been using the Ammit25 constantly since I got mine, just a pleasure to use. I run 2.5mm ID twisted 26 kanthal, rayon wick (the tight packing when using rayon means I have enough to fill those large juice inlet ports).
On coil mm, yes, the ID is based on whatever jig you use. Here's my coil master v4 set. The red block holds 1.5. - 4mm diameter rods. On the right you see the 2.5mm rod inserted in the top cap, which screws down onto the base (handle).
On coil mm, yes, the ID is based on whatever jig you use. Here's my coil master v4 set. The red block holds 1.5. - 4mm diameter rods. On the right you see the 2.5mm rod inserted in the top cap, which screws down onto the base (handle).
Nice they shipped my coil master kit the ammit ships the 20th I'm just going to wait for gearbest
Now mine doesnt leak anymore.... But now it wicks like .... so its being dry... haha.
Skickat från min SM-G935F via Tapatalk
Skickat från min SM-G935F via Tapatalk
Mines not leaking anymore either. 3.5mm coil using approx 10-11mm sheet of cotton with the skins removed, inners stretched and rolled. Iteo style or Scottish roll method. Wicked like a champ, super flavorful vapes at 60w 420-450F
I use cotton bacon v2 and Native Wick. My muji lives in my Rdas
Skickat från min SM-G935F via Tapatalk
Ammit 25 is plane proof. Just returned from flying with it and no leaks at all. Closed afc and jfc not a drop escaped and no flooding. Occasional condensation under the tank but still working like a champ
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Well, the difference between this and the Ammit dual is night and day.
Flavour is absolutely there, 9/10.
Piece of piss to build on. 10/10
I've stuck a DIY max VG liquid (custard creams, bloody beautiful!) in there, wicking absolutely fine.
One of the things the annoyed me to the point of almost putting the dual in the bin was how difficult it was to get the base off of the tank. No issues so far!
Highly, highly recommend this over my other single coil tank, OBS Engine Nano - difference is night and day.
Build I've got in there at the mo is a 3mm fused Clapton, ohms @ 0.38, 45w.
Really, really good tank.
Flavour is absolutely there, 9/10.
Piece of piss to build on. 10/10
I've stuck a DIY max VG liquid (custard creams, bloody beautiful!) in there, wicking absolutely fine.
One of the things the annoyed me to the point of almost putting the dual in the bin was how difficult it was to get the base off of the tank. No issues so far!
Highly, highly recommend this over my other single coil tank, OBS Engine Nano - difference is night and day.
Build I've got in there at the mo is a 3mm fused Clapton, ohms @ 0.38, 45w.
Really, really good tank.
Sigh its going to be this time next month till i get my ammit 25 gear bests date keeps changing first it was the 20th now its the 24th when it ships
They aren't the only ones. I have a p80 mod that was supposed to ship on the 7th and still hasn't shipped. It was on preorder for a month.
- Status
Similar threads
