Ammit Dual for starters

[chalaland]

Hello i'm joaquin and i'm from Argentina, just bought the Ammit Dual. Any advice on the whicking, the amount of cotton, the vg/pg proportions on the juice to prevent leaking or dry hits?
Should i use a single coil setup? it is needed to use the single coil plug?

 

[zoiDman]

Hi Joaquin. Welcome to the ECF.

With a Rebuild-able tank, you can usually control Leaking or Dry Hits by the Amount and Way you wick the Coil(s). So I would choose an e-liquid's PG/VG Ratio on what you like.

What type Hit are you looking for?

Lots of Flavor?
Lots of Clouds?
A Balance of Both?

 

[chalaland]

Hi Joaquin. Welcome to the ECF.

With a Rebuild-able Tank, you can usually control Leaking or Dry Hits by the Amount and Way you wick the Coil(s). So I would choose an e-Liquid's PG/VG Ratio on what you like.

What type Hit are you looking for?

Lots of Flavor?
Lots of Clouds?
A Balance of Both?

I'm looking for flavor, i was looking forward to buy the "demon killer" prebuild coils. What do you recommend?

 

[zoiDman]

I'm looking for flavor, i was looking forward to buy the "demon killer" prebuild coils. What do you recommend?

I'm probably Not the best to ask about those Coils. Because I have Never used them.

But for someone looking for Flavor, I would recommend a 70%VG to 30% PG e-Liquid. And then running in Single Coil mode with the Plug in. And the Air Flow more on the Restrictive Side verses more on the Wide Open Side.

But do Experiment with things. You might prefer it Better in Dual Coil mode? Or with an e-Liquid that is Higher in either VG or PG?

 

[chalaland]

I'm probably Not the best to ask about those Coils. Because I have Never used them.

But for someone looking for Flavor, I would recommend a 70%VG to 30% PG e-Liquid. And then running in Single Coil mode with the Plug in. And the Air Flow more on the Restrictive Side verses more on the Wide Open Side.

But do Experiment with things. You might prefer it Better in Dual Coil mode? Or with an e-Liquid that is Higher in either VG or PG?

thanks!

 

[zoiDman]

thanks!

Hey no problem chalaland.

Let us know things work out.

 

[BrotherBob]

Hello i'm joaquin and i'm from Argentina, just bought the Ammit Dual. Any advice on the whicking, the amount of cotton, the vg/pg proportions on the juice to prevent leaking or dry hits?
Should i use a single coil setup? it is needed to use the single coil plug?

Welcome and glad you joined.
Could try a single coil set up and I would plug the unused side to start.
I would get cellulose or rayon:
Rayon wick, better flow, flavor, saturation and Nic Hit!
Leaking and dry hits are not exclusively dependent on PG/VG ratios.
Might want to try the search function in upper right hand corner of this post. Could type in "dry hits " then, "PG/VG ratios explained".
Also for other questions, could read through:
Guide For New Vapers | Spinfuel VAPE
The information below can help with tank problems.
Might like to read:
Tank Flooding Explained | Learning Center | VaVaVape
Tank type atomizers... For new vapists - how they work | E-Cigarette Forum
TFV8 leaking