And, another Stealth on the way

[oplholik]

Picked up my second Stealth on the classies yesterday #1598, and can't wait to get it. I think I'm starting to see a collection starting here.
I can blame Imeo for this one , as there are no brass bottom caps, re-threader rings, or top caps to be had that I wanted to get for my first Stealth. So when this one showed up on the classies with a brass bottom cap, and re-threader ring, I jumped on it.
So now I will leave my first Stealth all SS, and maybe #3 Stealth will come along with the brass bottom cap, re-threader ring, and brass top cap, and hopefully I can afford it when and if it does.

 

[thormak]

Ohh you are the one. Damn I always wanted the early Stealth with old engraving.

 

[steliosss]

WOOOW.. for a moment I scared to death because I thought I had #1598 but I checked it and I have #1578
Cheers buddy... welcome to the club

 

[oplholik]

All I have at the moment is a pic of it, and the engraving is faded a little from polishing, but it looks like 1598 in the pic.

 

[imeothanasis]

just great op! Nice to see you around buddy and congratulations for your purchase. I wish you to enjoy your new Stealth as much as you can

 

[oplholik]

Thanks Imeo, great devices.

 

[oplholik]

I received "The GG" today. Now, seeing it, I see it's #598 not 1598. This would be a fairly old one right? It's in great shape other than the markings being somewhat faded. Now to get something loaded up so I can begin using it.

 

[imeothanasis]

tell us your opinion asap op

 

[oplholik]

I'm liking it Imeo. I'm using a carto and tank on it, and I even made up a new juice for it. I really like the looks and feel of the Stealth's.
I haven't had a chance to get it really cleaned up yet, but that will happen tomorrow when I get some Brasso. Then I'll clean up all the threads with some 91 proof alcohol.

 

[imeothanasis]

just great op, I am glad to hear that. Also, after threads get cleaned you will see a big difference on your vape

 

[oplholik]

I tore into the Stealth yesterday, cleaning all the threads with alcohol and a tooth brush, took apart the firing button assembly and cleaned all that. This one, someone put magnets in the switch instead of a spring, and it works just fine so will leave it like that, don't have the spring anyway. I also took a pencil eraser to the bottom spring and cleaned it up. Before all this, the firing button was kinda rough acting, and it just wasn't hitting like I thought it should be. Now It's performing like a champ.

 

[imeothanasis]

I am very glad that your Stealth works a lot better now and be sure that a button spring will make your Stealth work the best

 

[oplholik]

Thanks Imeo, I will be on the lookout for a spring.

 

[oplholik]

Ahh, I just see that Fluid Vapor has the "Just GG" button spring, is that the one I need?

 

[imeothanasis]

yes op..........

 

[oplholik]

I have a question for my Stealth's. Should I want to use an 18500 batt, can the Stealth be made to hold an 18500 batt by another means other than adding the threaded tube? I'm thinking a re-threading ring that's wider than the one I have presently. I just don't like the looks of the smaller tube in there that leaves an indent in the middle of the mod, if you know what I mean.

 

[steliosss]

You can do that with a JGG tube plus one JGG sleeve and the telescope which it would be inside and invisible.

But why don't you wait a little for Esterigon?

 

[oplholik]

Oh, I want, and expect to get one of those also.

 

[dspin]

Ohh you are the one. Damn I always wanted the early Stealth with old engraving.

The classic earlier Stealth GG's will ALWAYS look the best to me. 2011 engravings cant be beat - IMO, UNLESS, they are brought back and made again.

 

[D Stanley Querfurth]

I have a question for my Stealth's. Should I want to use an 18500 batt, can the Stealth be made to hold an 18500 batt by another means other than adding the threaded tube? I'm thinking a re-threading ring that's wider than the one I have presently. I just don't like the looks of the smaller tube in there that leaves an indent in the middle of the mod, if you know what I mean.

Add a just gg extension sleeve to your Ggts/stealth engraved tube and a rethreader and it will be solid to use with18500 batteries for sure!!!

Greetings
Stan

Gesendet von meinem HTC Sensation XE with Beats Audio Z715e mit Tapatalk