Any 801 Atty cart mods/cart alternatives?

[prole]

I picked up some HV 801 atmizers recently, and while intially blue foam seemed to work much better than the oem cart filler,turned not so good, maybe have not figured out the best way to cut it, settled on 1/2 squares....so wondering if there are any other ways to improve wicking and if there are alternative carts/tanks that could be purchased that work better than the stock setup.... oem and BF seem to have trouble getting juice to the wick... one or two good hits..then dry.

Thanks in advance

 

[uba egar320]

I never had any luck doing anything other than dripping with 801's. What seemed to work for a while would always turn into a leaky mess eventually lol.

 

[mwa102464]

Don't know if this is a worth while option for you but I took all my old HV-801's and cut them down to mini 801's and use them to drip with. For some reason shortening the 801's to this mini size and using them to drip with is much better than that long tube the stock ones have on them. A simple good pipe cutter does the job and they work great like this.

 

[VictoryNotVengence]

the vapemate from super t will work on an 801 as a tank system, they have a 801 to 510 tip adapter that works.

 

[drewk302]

Don't know if this is a worth while option for you but I took all my old HV-801's and cut them down to mini 801's and use them to drip with. For some reason shortening the 801's to this mini size and using them to drip with is much better than that long tube the stock ones have on them. A simple good pipe cutter does the job and they work great like this.

Definitely works best for me with the 801 hv attys. I can drip 4 ( atleast ) drops and vape away, I get no leaks either.