any forum newbies using mech mods?

[Silverspeed3]

Just wondering if any new members are using mods? if so, what is your rig?

 

[silar]

I'm not yet, but looking at a few to start using when I start dripping.. Got a bunch of Ego styles and a VTR.. Really starting to get into this!

 

[lamebore]

Technically still a new member but not new to vaping. I have a stingray, turtle ship with patriot and KFL+ on top. I got a cana modz in the mail right now and I am SO pumped. I usually run .3-.5 ohm dual coils with organic cotton, 73/30 vg/pg

 

[Torrque]

original SS King Mod with Zenith V2 rda, Just GG with ithaka, and Poldiac with the DID TNS upgrade.
Also not new to vaping but definitely a forum newbie

 

[obsidian5889]

My first mech is in the mail a maraxus ironman clone. I'm still looking to get an RDA and a multimeter

 

[VexedMali]

I'm new to the site, not really new to vaping but don't know very much about it. I've been using a k100 mech mod for the past year, and I have had issues with it, but to be fair I'm brutal on these things. I've hammered them back into piece after dropping it and it's worked, plus my son tries to play keep away if he grabs it. Actually, my 4th one. And I've used vivi nova top coil tanks the whole time too. I just got (today) as Aspire Nautilus and am really enjoying that much more then the nova. I'm waiting for my provari to show up!

 

[BeerGolfClouds]

Yes. All clones: SS Neme, Copper steampunk Chi You, K100, and black copper Stingray. Favorite at the moment is a Stillare clone on the Neme, dual jumbo coils at .20 ohms vaping DIY 100% VG juice. Flavor is off the charts, and there's a bit of vapor as well

 

[intunegp]

New member here but not new to vaping. I currently have the following setups:

-Hcigar Nemesis with Hcigar Stillare RDA, both stainless
-Hcigar Stingray with Crown clone RDA, brass/stainless accents
-Infinite King v2 with Infinite Tobh clone, both brass
-GP Paps clone with Enigma clone RDA, both brass

Right now all four have the same dual coil build but each with unique wicking to determine the best method for these coils.

PRO TIP for new vapers...a very tiny adjustment to how your wick contacts the coils can make a HUGE difference in flavor and vapor production.

 

[tnt56]

Welcome all. PLEASE PAY ATTENTION TO OHMS LAW AND BATTERY AMP LIMITS. Bad things can happen to good people when they don't fully understand what they are dealing with.

Most important thing in vaping!!!!!!!!!!!!!!!!!!!!!! Be safe!!!!!!!!!!!!!!!!!!!!!!

 

[BeerGolfClouds]

Welcome all. PLEASE PAY ATTENTION TO OHMS LAW AND BATTERY AMP LIMITS. Bad things can happen to good people when they don't fully understand what they are dealing with.

Most important thing in vaping!!!!!!!!!!!!!!!!!!!!!! Be safe!!!!!!!!!!!!!!!!!!!!!!

Yes indeed, safety first! Probably should have edited my post due to the low sub ohm mention to add a disclaimer. FYI, lots of electrical experience here, I check resistance using multiple redundant methods, and I'm using VTC5 batteries and swapping them out constantly.

 

[p7willm]

Two days after I got my Ego I got my hammer clone. I used it with a nautilus and did not build anything for quite a while.

 

[jperkinson]

I just bought a maraxus clone as well. I am having some problems with the firing button. Apparently, the spring is extremely weak, and absorbs heat causing the firing button to heat up at an alarming rate. I am going to buy a new spring at ACE tomorrow, hopefully if you have the same problem this will help.

 

[dchemist]

I'm new to the site, not really new to vaping but don't know very much about it. I've been using a k100 mech mod for the past year, and I have had issues with it, but to be fair I'm brutal on these things. I've hammered them back into piece after dropping it and it's worked, plus my son tries to play keep away if he grabs it. Actually, my 4th one. And I've used vivi nova top coil tanks the whole time too. I just got (today) as Aspire Nautilus and am really enjoying that much more then the nova. I'm waiting for my provari to show up!

Ah, a noob after my own heart! I'm running a Nautilus on k100 as well; however, I've only had mine a week.

Yes I'm still using an S3 'cause I spent all my money on Vaping!

 

[Verinuh]

I am new to the forums and vaping, and I am running a Legacy now. I love the mod itself, but the kick can be frustrating.

 

[auxsend]

I use a turtle ship v1 clone holding a vtc5 with a trident clone and kayfun clone. This setup works extremely well.

 

[tj99959]

Obviously not a noob anymore, but I was only about a month into vaping when I bought my first mechanical. (a Mako) That was over three years ago. That poor old mod has been to Hell and back, and still works just fine. So if you have any questions as to WHY a mechanical ... there's your answer. At this point that old mechanical cost $0.06/day

 

[JethroN]

I have my first mod on it's way to me.... Supposedly it has passed through customs and is now on it's way to me...

 

[jerkmaster9k1]

New member, been vaping just over a year. Very familiar with ohm's law.

Mechs: Hcigar Brass Stringray

Regulated: Vamo v5
Hana DNA20 clone
Way too many Ego batteries

Atomizers: Unknown Kayfun/Russian SS clone
Tobeco Crown RDA
Unknown Trident V2 RDA
Smok Octopus RDA
Vision Vivi Nova
Smok ARO I and II
Aspire Nautilus

My current favorite rig is my Stingray with a dual 30ga parallel build at .4 ohms in my crown rda. I am using VTC5's and I do check for resistance, shorts etc before vapin' it. Tbh I usually just build it to 1.2 ohms and throw it on the Vamo (not sure why, there's just something special about that vamo) and run it at 15 watts but I gotta say I have been enjoying the sting ray/crown combo quite a bit.

 

[Ciege666]

Stingray SS with SS kayfun, .5 single coil

Black Copper Stringray Patriot .33 ohm duel parrallel coil

 

[elee86]

I've been vaping for a month and my first device was a Caravela clone. However, I researched all this stuff for half a year before even pulling the trigger to buy one.
Currently running a Stingray clone and KFL+.