- Status
I think it would be great for a database of part sizes for different mods and attys.
It is crazy to pay 15-30 $ in shipping for one screw and a few orings from europe. Ill be getting my lite this week so ill try to measure and find a source.
If you need any of the little ball bearings for a roller/dingo let me know I have hundreds. They are 2 mm chrome.
It is crazy to pay 15-30 $ in shipping for one screw and a few orings from europe. Ill be getting my lite this week so ill try to measure and find a source.
If you need any of the little ball bearings for a roller/dingo let me know I have hundreds. They are 2 mm chrome.
IT was mentioned by ehuman in the klite thread that it is equivilent to a #8 oring in US
Thanks so much!! Dude
Gonna go to Home Depot and pick some up I really appreciate it
Sent from my iPhone using Tapatalk - now Free
The metric size of Kayfun chimney o-ring is 5 x 1.5 mm
http://www.oringsandmore.com/viton-oring-5-x-1-5mm-price-for-25-pcs/
http://www.oringsandmore.com/viton-oring-5-x-1-5mm-price-for-25-pcs/
Ditto. A good set of calipers will go a long way. I have some rings I need to rebuild corny kegs with pretty frequently. 3 different sizes, 5 rings total. They typically charge $5-10 for 1 set. I took some measurements, got a bag of 100 for each of the 2 small sizes for a couple bucks & the large ones came in a bag of 10 for a couple more bucks.
Vaping rings seem to be just as bad if not worse, price-wise. If it's an easily damaged/lost ring, the calipers will pay for themselves in a big hurry.
This is a life saver. Those pesky swelling o-rings are a real pain. I used the first link to buy 25 of the 1.5 x 5 mm ones. McMaster Carr was better pricing, but too confusing for me. I didn't know which of the three materials to choose from. I'm so glad I found this thread. No Kayfun is no fun at all!
Sorry this is such an old thread, but still very helpful. Links are still good
Sorry this is such an old thread, but still very helpful. Links are still good
Last edited:
I was looking for this exact same information and I found this also,,,
Kayfun 3.1 Repalcement O-Ring Sizes | VaperCoils - Build the best coils.
I am not sure of what material to go with, so I would recommend silicon or rubber?
But I am mostly finding Buna-N, and I suppose that should be fine as well?
This is where we should start,,,
These are Food Grade O-Rings, but I am horrible at conversions.
McMaster-Carr
So, here is the run down
Use the manual to reference part area's
SvoeMesto Kayfun v3.1 ES - User manual
5c - o-ring (pg. 7)
3b - Evaporation Chamber Top (pg. 5)
o-ring Size = 1.5mm x 5mm (possibly #8 o-ring at Home Depot)
These might work,,, http://www.homedepot.com/p/DANCO-8-O-Rings-10-Pack-96725/100277697#specifications
Next:
2d (pg. 4)
4c (pg. 6)
5b (pg. 7)
These should be all the same size
o-ring Size = 1mm x 19mm
Next:
The Drip tip o-ring, I am not sure what size that is
Need dimensions
Further Note:
ID OD C/S
19mm 21mm 1mm
ID = Inside Diameter
OD = Outside Diameter
C/S = Cross Section (how thick it is)
Other Parts that can't be sourced from many places:
Kayfun Positive Post Insulators - 5 pack - Kidney Puncher
Kayfun Deck Insulators - 5 pack - Kidney Puncher
I am not sure of the size of the Deck Screws
Spare Kayfun Deck Phillips Head Screws - 5 Pack - Kidney Puncher
Fill Hole Screw:
Need Source
Kayfun 3.1 Repalcement O-Ring Sizes | VaperCoils - Build the best coils.
But I am mostly finding Buna-N, and I suppose that should be fine as well?
This is where we should start,,,
These are Food Grade O-Rings, but I am horrible at conversions.
McMaster-Carr
So, here is the run down
Use the manual to reference part area's
SvoeMesto Kayfun v3.1 ES - User manual
5c - o-ring (pg. 7)
3b - Evaporation Chamber Top (pg. 5)
o-ring Size = 1.5mm x 5mm (possibly #8 o-ring at Home Depot)
These might work,,, http://www.homedepot.com/p/DANCO-8-O-Rings-10-Pack-96725/100277697#specifications
Next:
2d (pg. 4)
4c (pg. 6)
5b (pg. 7)
These should be all the same size
o-ring Size = 1mm x 19mm
Next:
The Drip tip o-ring, I am not sure what size that is
Need dimensions
Further Note:
ID OD C/S
19mm 21mm 1mm
ID = Inside Diameter
OD = Outside Diameter
C/S = Cross Section (how thick it is)
Other Parts that can't be sourced from many places:
Kayfun Positive Post Insulators - 5 pack - Kidney Puncher
Kayfun Deck Insulators - 5 pack - Kidney Puncher
I am not sure of the size of the Deck Screws
Spare Kayfun Deck Phillips Head Screws - 5 Pack - Kidney Puncher
Fill Hole Screw:
Need Source
Last edited:
Ello!
I've a blogpost which states the dimensions as well as where you can get em works perfectly from my own experience, so yeap. Hope that helps
Burping out loud using Tapatalk
I've a blogpost which states the dimensions as well as where you can get em
works perfectly from my own experience, so yeap. Hope that helps Burping out loud using Tapatalk
- Status
Similar threads
