Yes,
I keep getting banned though, cos i always relapse.
You could call me a hopeless case.
I think this thread is our confessional page, who needs a support group or a priest when we've got this place
Anyone here used fasttech.
- Thread starter trouble1000
- Start date
- th_trl_thread_readers 0
- Status
I think this thread is our confessional page, who needs a support group or a priest when we've got this place
I do quite a bit of re-building, mostly changing things to cotton.
I've heard that FT do some coils that have no resistance wire legs and the wraps are resistance wire. I'm going to have to check though, if they are the right sort, I'll have to order some for the Ithaka clone. I think they come in a 3 pack already wrapped around silica wicks. I'll let you know when I find out
Cheers mate,
I think the ithaka, is the next generation oddy
I'm hoping I can find parts for it, it's always good to have spare seals etc.
But to be honest, if it lasts me a few months without swapping out parts I'll be happy, I'll probably have moved onto something else in 3 months
LOL! ok i have plenty of wire and it is amasing how you can rebuild a glass fuel filter into a new tank?
Terry you are almost right, i just want to have a go at building a MOD. Ian do you do a bit of tinkering?
Terry you are almost right, i just want to have a go at building a MOD. Ian do you do a bit of tinkering?
Well I am on order number 5 from them and have had no problems at all. Shipping time is about 8 days but I have gotten items from them in ~5 when in stock.
I highly recommend them to anybody new to vaping and don't want to spend a huge outlay. Just be patient with the FREE shipping.
Cajunsteaming Vaping On!!!!!
So I've just been doing some checking Terry, it looks like these are a no res/res/no res combo (none resistance for the legs). So they should work on the oddy:
$1.86 Replacement Atomizer Core Heating Wire for Electronic Cigarette (3-Pack) 3-pack at FastTech - Worldwide Free Shipping
If you read the reviews and comments, it looks like the right piece of kit
$1.86 Replacement Atomizer Core Heating Wire for Electronic Cigarette (3-Pack) 3-pack at FastTech - Worldwide Free Shipping
If you read the reviews and comments, it looks like the right piece of kit
LOL! ok i have plenty of wire and it is amasing how you can rebuild a glass fuel filter into a new tank?
Terry you are almost right, i just want to have a go at building a MOD. Ian do you do a bit of tinkering?
I love a bit of tinkering. It's great to take things apart, modify them and get them working even better than before.
I've always said that one day I'll build my own mod, just can't decide which design yet
Well I am on order number 5 from them and have had no problems at all. Shipping time is about 8 days but I have gotten items from them in ~5 when in stock.
I highly recommend them to anybody new to vaping and don't want to spend a huge outlay. Just be patient with the FREE shipping.
Cajunsteaming Vaping On!!!!!
That's pretty quick shipping. Us poor cousins in the UK have to make do with 10+ days shipping
Think I'm on order no.7 or 8 now, I've lost count.
Been looking at the typical box mods but not that impressed. Great if you not meesed with that sort of stuff so would like to have a go at doing a tube type mod. Ordered a bunch of parts to see how it could lay out. Still might build a box mod just because?
That pre wound wire, you might as well just do that yourself? rder some 32awg Kathal from fleabay and do it yourself? £2.00 for 20m real and your away. I'm even looking at building a device to make winding easier?
It's probably a good idea to build a box mod to start with, just to get the method right.
But I've been thinking about buying the Vamo circuit board and building it into a customized tube mod, something with loads of engraving on it, that looks totally unique. I'll build it one day.
The pre wound coils, are for attys that need a coil made from non-resistance wire and resistance wire. Basic coils from kanthal are pretty easy to do. But the non-res/res combos are a bit more difficult to do, it's hard to join the two wire types together.
But I've been thinking about buying the Vamo circuit board and building it into a customized tube mod, something with loads of engraving on it, that looks totally unique. I'll build it one day.
The pre wound coils, are for attys that need a coil made from non-resistance wire and resistance wire. Basic coils from kanthal are pretty easy to do. But the non-res/res combos are a bit more difficult to do, it's hard to join the two wire types together.
10 metres 0.20mm 99.5% Pure Nickel Wire N6 - No resistance | eBay
Sounds like you need to jump in Ian
Sounds like you need to jump in Ian
10 metres 0.20mm 99.5% Pure Nickel Wire N6 - No resistance | eBay
Sounds like you need to jump in Ian
Thanks for the link, I'll keep it for future use.
At the moment I've promised myself not to spend, but Terry will tell you it doesn't last very long
so the competition begins,
WHO WILL BUILD THE FIRST MOD ? I am guessing that if moose wins, Then trouble will be the first to make you an offer for it.
Or you could set up a business together and call it "mods r us"
WHO WILL BUILD THE FIRST MOD ? I am guessing that if moose wins, Then trouble will be the first to make you an offer for it.
Or you could set up a business together and call it "mods r us"
I pulled the trigger whilst looking for it LOL
Maybe not? i'm good at coming up with solutions and grabing the gear but rubbish executing them Terry
Well i am going to get an oddy, In my wishlist as i type, and see what it is like with the stock wick and wire.
If i fall in love with it,like i usually do, I will get some of that n/r wire from flea bay, thanks paul.
If i fall in love with it,like i usually do, I will get some of that n/r wire from flea bay, thanks paul.
No worries Terry and Ian it's good to share. There is cheaper but from greece and only few pence in it. On the bld front i'm lucky in that i have facilities available to machine stuff (my workshop). Looking at either SS or aluminium, if the latter then i will cast the material myself and use aluminium bronse as not seen that used yet
So I've just been doing some checking Terry, it looks like these are a no res/res/no res combo (none resistance for the legs). So they should work on the oddy:
$1.86 Replacement Atomizer Core Heating Wire for Electronic Cigarette (3-Pack) 3-pack at FastTech - Worldwide Free Shipping
If you read the reviews and comments, it looks like the right piece of kit
Yeah, not bad for £1.22 for 3.
.......n it... I think we all need help, Serious help, The lot of us.
No worries Terry and Ian it's good to share. There is cheaper but from greece and only few pence in it. On the bld front i'm lucky in that i have facilities available to machine stuff (my workshop). Looking at either SS or aluminium, if the latter then i will cast the material myself and use aluminium bronse as not seen that used yet
Mmmm, sounds interesting.
You will have to post some pics of your first success.
Ha ha ha... It's true we all need help. Joining these wires together is simple enough Ian honesly. There is a vid on Youtube somewhere but if you order them them send us close up pic so we can see how they do it for real. Terry if you do order be prepared for a wait as my order for the Oddy is on hold.
- Status
Similar threads
- Locked
