• This forum has been archived

    If you'd like to post a thread, post it here instead!

    View Forum

Anyone here used fasttech.

Status
Not open for further replies.

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
Not all that often to be honest mate. I tend to use it when I've got a new juice to try out. It gives great flavour. I might re-wick it with cotton at some point, see if it makes any difference. If the flavour is great now with silica, I bet it will be amazing with cotton.

I have promised myself that when my new tanks start to arrive, I will re-wick them with cotton. I have only tried it once befere with an evod, and i think i put too much cotton in LOL; so it weren`t that great.

But i have seen plenty of reviews, and followed your advice; and decided to have another crack at it :toast:
 

trouble1000

PV Master of Valinor
ECF Veteran
Verified Member
Mar 22, 2013
5,583
8,669
Rochdale, Lancs, GB
www.puffin-eliquid.com
Cheers Ian, my primary diagnosis is bipolar with secondary complex psychological problems, that's great your wife's epilepsy is so well controlled :)

Terry, the Fogger looks MINT! I've not looked yet, just threaded the coil with a lot of patience lol, even if there's a wait I'm grabbing one! :D
Rocket still showing as despatched to overseas 20/11/2013 - any day now mate, any day :D

Cheers Lisa, I'll give it a try, could be easier than cotton balls and sounds more appealing to me than ekowool :)

Well, off now folks, nitey night, order me Fogger then Bo beep for moi! See you all tomorrow :)


Sent from my iPhone using Tapatalk

My step-daughter only got diagnosed with bi-polar recently, so their still working on her meds at the moment. She is a lot better now, than a couple of months ago - but it's still a work in progress.

Good night Claire.

I'm off too now. Work for me tomorrow and hopefully I might get some vape mail too, fingers crossed :)
 

trouble1000

PV Master of Valinor
ECF Veteran
Verified Member
Mar 22, 2013
5,583
8,669
Rochdale, Lancs, GB
www.puffin-eliquid.com
I have promised myself that when my new tanks start to arrive, I will re-wick them with cotton. I have only tried it once befere with an evod, and i think i put too much cotton in LOL; so it weren`t that great.

But i have seen plenty of reviews, and followed your advice; and decided to have another crack at it :toast:

Hope it works out for you mate, as long as you use less than you think you need you can't go wrong.

I'm outta here now.
See you tomorrow.
 

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
Cheers Ian, my primary diagnosis is bipolar with secondary complex psychological problems, that's great your wife's epilepsy is so well controlled :)

Terry, the Fogger looks MINT! I've not looked yet, just threaded the coil with a lot of patience lol, even if there's a wait I'm grabbing one! :D
Rocket still showing as despatched to overseas 20/11/2013 - any day now mate, any day :D

Cheers Lisa, I'll give it a try, could be easier than cotton balls and sounds more appealing to me than ekowool :)

Well, off now folks, nitey night, order me Fogger then Bo beep for moi! See you all tomorrow :)


Sent from my iPhone using Tapatalk

Good night claire,

Pleasant Dreams :)
 
Last edited:

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
My step-daughter only got diagnosed with bi-polar recently, so their still working on her meds at the moment. She is a lot better now, than a couple of months ago - but it's still a work in progress.

Good night Claire.

I'm off too now. Work for me tomorrow and hopefully I might get some vape mail too, fingers crossed :)

G`night mate.
 

Burnie

The Bug Man
ECF Veteran
Verified Member
Jul 1, 2009
5,565
18,198
Sunny Florida
I'm gonna go on FT and see when Foggers shipping, NEED one ha ha!
The dog told me to get it for Christmas off him!

My dog also got my fogger for my xmas prezzie.:lol:

Well in IMHO the Fogger V2 is a PITA and POS. Either dry hits from not wicking or flooding. I have tried again and again trying different ways to get it right, ready to just put it in the round file and give up. Looked at a lot of videos and it is hit and miss on getting it right.

Vape On
:vapor:
 

lisancentraltx

Vaping Master
ECF Veteran
Verified Member
Aug 28, 2009
4,173
9,491
59
Ringling Brothers Circus
Well in IMHO the Fogger V2 is a PITA and POS. Either dry hits from not wicking or flooding. I have tried again and again trying different ways to get it right, ready to just put it in the round file and give up. Looked at a lot of videos and it is hit and miss on getting it right.

Vape On
:vapor:

Well, the Fogger V2 may be like the AGA T2, a temperamental old cuss needing a bit of sweet talking :p She's firing for me, no leaking, gurgling, I've got mesh on her, I'm not sure if that makes a difference or not.
 

Burnie

The Bug Man
ECF Veteran
Verified Member
Jul 1, 2009
5,565
18,198
Sunny Florida
Well, the Fogger V2 may be like the AGA T2, a temperamental old cuss needing a bit of sweet talking :p She's firing for me, no leaking, gurgling, I've got mesh on her, I'm not sure if that makes a difference or not.

I tried the mesh on one build, might have done it wrong, but flooded like crazy. Guess I don't have the patience for this one, I want to coil, fill, and Vape. I don't want to have to sweet talk it to work right, I'm not good at that. I got my SVD to put the Fogger on, now I need to figure what topper I am going to have to get to put on my SVD, as I do like it in 18350 mode, more like a really small vibrator, instead of the large 18650 vibrators. :facepalm:

Vape On
:vapor:
 

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
"So hows the dusty old cross holding out?"

I'm hangin' in there - but it's been a bit weird lately.

Death in the family, may be moving house (to Staffordshire), stuff... just too much all at once.

But that's life - you've just got to keep your chin up! :)

Very sorry to hear of your loss mate,

And yes keep your chin right up. I lost my mother in 2007, and i thought i would never get over it; but what helped me was to remember the good times we all had together when me and my brothers were growing up.

I sincerely hope you have got your family near/with you, so you can support each other.

Staffordshire is where my grandparents (on my dads side) originated from, It was a case of trawling over the moors during the 20`s with a handcart packed with any belongings they had, and settling in stalybridge (where my dad was born) Many died during that trek, of hypothermia, disease, amongst other things.

But the strong survive pipe, and that is why we are here now. "they were strong" and so must we be !
 

e-pipeman

Vaping Master
Supporting Member
ECF Veteran
Oct 16, 2008
5,430
5,594
Brown Edge, England
I tried the mesh on one build, might have done it wrong, but flooded like crazy. Guess I don't have the patience for this one, I want to coil, fill, and Vape. I don't want to have to sweet talk it to work right, I'm not good at that. I got my SVD to put the Fogger on, now I need to figure what topper I am going to have to get to put on my SVD, as I do like it in 18350 mode, more like a really small vibrator, instead of the large 18650 vibrators. :facepalm:

Vape On
:vapor:

Have you tried an Igo-L? If you use them single coil with nothing fancier than eko-wool wick they're just great imho. Might save you a bob or two as well. :)
 

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
I tried the mesh on one build, might have done it wrong, but flooded like crazy. Guess I don't have the patience for this one, I want to coil, fill, and Vape. I don't want to have to sweet talk it to work right, I'm not good at that. I got my SVD to put the Fogger on, now I need to figure what topper I am going to have to get to put on my SVD, as I do like it in 18350 mode, more like a really small vibrator, instead of the large 18650 vibrators. :facepalm:

Vape On
:vapor:

Gawd burnie,

You do like your vibrators you.:evil:
 

e-pipeman

Vaping Master
Supporting Member
ECF Veteran
Oct 16, 2008
5,430
5,594
Brown Edge, England
Very sorry to hear of your loss mate,

And yes keep your chin right up. I lost my mother in 2007, and i thought i would never get over it; but what helped me was to remember the good times we all had together when me and my brothers were growing up.

I sincerely hope you have got your family near/with you, so you can support each other.

Staffordshire is where my grandparents (on my dads side) originated from, It was a case of trawling over the moors during the 20`s with a handcart packed with any belongings they had, and settling in stalybridge (where my dad was born) Many died during that trek, of hypothermia, disease, amongst other things.

But the strong survive pipe, and that is why we are here now. "they were strong" and so must we be !

Thanks Terry,

Yes, the wife's mother's kidneys gave out towards the end of October. She was 87, so she had a good innings. Funeral,church and bun-fight all went well.

It was around the same time that my mum was diagnosed with Alzheimers officially (she's 89 and it's been going on for a while).

Anyway - funeral done and the business end of all that (solicitors and stuff) well under way.

Off to visit my mum tomorrow.

Best beloved is off to her mum's with her sister to sort stuff in the house.

The key to this is that life must go on. That's why we're here.

Anyway, enough cr&p philosophy for one evening! :)
 
Status
Not open for further replies.

Users who are viewing this thread