Anyone here used fasttech.

[terry w]

I think the worst menthol one I had was the minty chocolate from FT, it was dire. Felt like I'd been licking a tub of Vicks

This Epic juice one is weird though, it even says on the site that it gives a menthol type hit but doesn't have menthol in it

I've got a few new juice suppliers to try next year too mate. I was thinking about buying direct from Nicoticket and Epic in the USA, but I'm not sure if the juice would get through customs or not - I'll just have to get it from Spiritus for now and vape it as a treat

I was looking at a site what does mt baker in the eu after you mentioned it, you know the 1 ml samplers ? was it rainbow something the site was called ?

 

[trouble1000]

I was looking at a site what does mt baker in the eu after you mentioned it, you know the 1 ml samplers ? was it rainbow something the site was called ?

Yep that's the one mate :

Smoke Rainbow eliquid samples shop

They do some mixed sample packs, but if you notice their different nic levels mixed in - some 0, some 8, some 12 etc. I'd have to just order single 1ml samplers, all in 18 or 24mg. Still a good way to try out new stuff though mate.

Right, bed time again. See you late mate.

 

[terry w]

Yep that's the one mate :

Smoke Rainbow eliquid samples shop

They do some mixed sample packs, but if you notice their different nic levels mixed in - some 0, some 8, some 12 etc. I'd have to just order single 1ml samplers, all in 18 or 24mg. Still a good way to try out new stuff though mate.

Right, bed time again. See you late mate.

LOL same here mate, i may give it a go in the new year. night mate

 

[lisancentraltx]

Just got home from work, walked the pup, and picked up the following from the mailbox:

Digital 150mm (6-inch) Caliper SKU: 1167600
Stainless Steel Curved Drip Tip for 510 / ViVi Nova / DCT SKU: 1478900
RG400 Bottom Coil Glass Clearomizer (4.0mL) SKU: 1536500
WLXY P-600B Detachable Mini Electric Drill / Grinding Machine SKU: 1539500
Replacement Glass Tank for I-Atty Atomizers SKU: 1532000

Hubby is liking the mini-drill. He's saying it's a 'dremel'? Whatever... He said it'd be stored with his tools, meaning he wants it now, but I hid it under my desk =] He also eyed the calipers and said they looked better than what he has at work =]

I'm vaping some Rainbow Sherbet in the RG400 with the curved drip tip. It's a nice little tank with the Protank atomizer that i can rebuild. The flavor with the atomizer is killer delicious. Tip is a bit wobbly even through the o-ring looks pretty thick :/

Quick pic before I go to bed: Sigelei #20, RG400, Curved Drip Tip

 

[Manicmama]

Hello strangers!
Thought I would pop on and see how you're all doing before I tackle the cleaning! I'm so sorry I've not been about, not had time to crap recently with Christmas coming and work!
My fella has hidden my Taifun and KFL til Christmas Day, wrecking my head knowing they're here somewhere but can't vape them yet! My FT iAtty and Steam Turbine were scrubbed and sterilised everyday for a week and STILL had gunk coming off them so they have been assigned to the back of the vape cupboard til I acquire an ultrasonic cleaner and will see if that brings them up. My dripper is as yet not taken apart for sterilisation, nor is my ever so pretty Fuschia rocket as the disappointment with the other two and lack of time made me want to wait a bit - now I've got stupid shaky hands though cos I've been upped to 800mg lithium, doc wants me at 1g but said I could wait and see if shakes pass, they've not so have had to stop working and rely on other half to make my coils and wicks for me, which is a pain in the bum cos that was/is have the fun for me. Other half can only recoil protanks and the aga t2 as that's what he's seen me do, he hasn't got the patience to revise on YouTube like me and as he doesn't vape it himself, he won't sit there for hours fiddling and perfecting - but he's a good un for doing it for me though! I'm at quacks Monday to see doc and I'll be telling him to sort it, I NEED to get back to building coils, playing about with set-ups AND try my new stuff out!
I'm awaiting another Aga T2 from the postie, hopefully be here today, as the protanks are pants to me now I've tried gennies, but changing the juice is a pain with my hands being screwy so needed another for a different vape through the day til my hands get sorted.
I'm doing a juice order today, I know it'll probs be after Christmas when it arrives and well into New Year til it's steeped, but I've got 7 different juices of varying quantities totalling approx 45ml and can nip in a B&M if I get really stuck, just kept putting my juice order off as I'm indecisive anyway and every time I went to order I'd be umming and ahhing and then get sidetracked by something! I've decided I'm ordering from vapists cos of the good things I hear and Codz regards them and his juice tastes seem similar to mine.
Has anyone here seen or got the Aga T3? I spotted it when I ordered the second T2, I was tempted as it looks like it could either be fantastic or ...., but decided I'd wait til my hands are fixed and can happily play about with builds again.
I think I will grab an ultra sonic cleaner on Christmas Eve when everything has been got for Christmas Day - so much stress, hectic-ness and panic for one chuffing day - I ain't a Scrooge, I'm like an overgrown kid on Christmas Day and the lads faces are unbeatable when they see the big mans been, but I hate the run up and the pressure I put on myself. I'd go abroad for it but then I'd have the stress of sorting Christmas for our return PLUS stressing over packing to go away and probably forgetting lots! I need someone to come organise me and keep me focused!
Anyway, I hope everyone's a happy vaper, I probably won't have time to go through all the stuff I've missed til festivities are over and kids are back at school in Jan, but I'll be nipping on and checking out recent posts regular again now I've given up work for a bit and can skive of chores with a brew when I like!
It's good to be home with you all lol!


Sent from my iPhone using Tapatalk

 

[lisancentraltx]

Good to see you, Claire!!! I can understand you being so busy with work and little ones and the health issues <3

Hiding your toppers for Christmas is a down and dirty trick LOL then again, if you've got the shakes, it's probably better you let them be as i've lost a few of the bits and pieces myself and their hell to find Worst case, if you keep the shakes for longer, order some FastTech pre-built coils and pull out the silical, twist the pre-made coil onto a screw or drill bit to open it up more and THEN get the hubby to slip your preferred wicking material through it =] Surely the hubby can get the legs on... well unless it's one of those with the ceramic cup and rubber stopper thingy LOL

Missing you girlie! <3

 

[terry w]

Hello strangers!
Thought I would pop on and see how you're all doing before I tackle the cleaning! I'm so sorry I've not been about, not had time to crap recently with Christmas coming and work!
My fella has hidden my Taifun and KFL til Christmas Day, wrecking my head knowing they're here somewhere but can't vape them yet! My FT iAtty and Steam Turbine were scrubbed and sterilised everyday for a week and STILL had gunk coming off them so they have been assigned to the back of the vape cupboard til I acquire an ultrasonic cleaner and will see if that brings them up. My dripper is as yet not taken apart for sterilisation, nor is my ever so pretty Fuschia rocket as the disappointment with the other two and lack of time made me want to wait a bit - now I've got stupid shaky hands though cos I've been upped to 800mg lithium, doc wants me at 1g but said I could wait and see if shakes pass, they've not so have had to stop working and rely on other half to make my coils and wicks for me, which is a pain in the bum cos that was/is have the fun for me. Other half can only recoil protanks and the aga t2 as that's what he's seen me do, he hasn't got the patience to revise on YouTube like me and as he doesn't vape it himself, he won't sit there for hours fiddling and perfecting - but he's a good un for doing it for me though! I'm at quacks Monday to see doc and I'll be telling him to sort it, I NEED to get back to building coils, playing about with set-ups AND try my new stuff out!
I'm awaiting another Aga T2 from the postie, hopefully be here today, as the protanks are pants to me now I've tried gennies, but changing the juice is a pain with my hands being screwy so needed another for a different vape through the day til my hands get sorted.
I'm doing a juice order today, I know it'll probs be after Christmas when it arrives and well into New Year til it's steeped, but I've got 7 different juices of varying quantities totalling approx 45ml and can nip in a B&M if I get really stuck, just kept putting my juice order off as I'm indecisive anyway and every time I went to order I'd be umming and ahhing and then get sidetracked by something! I've decided I'm ordering from vapists cos of the good things I hear and Codz regards them and his juice tastes seem similar to mine.
Has anyone here seen or got the Aga T3? I spotted it when I ordered the second T2, I was tempted as it looks like it could either be fantastic or ...., but decided I'd wait til my hands are fixed and can happily play about with builds again.
I think I will grab an ultra sonic cleaner on Christmas Eve when everything has been got for Christmas Day - so much stress, hectic-ness and panic for one chuffing day - I ain't a Scrooge, I'm like an overgrown kid on Christmas Day and the lads faces are unbeatable when they see the big mans been, but I hate the run up and the pressure I put on myself. I'd go abroad for it but then I'd have the stress of sorting Christmas for our return PLUS stressing over packing to go away and probably forgetting lots! I need someone to come organise me and keep me focused!
Anyway, I hope everyone's a happy vaper, I probably won't have time to go through all the stuff I've missed til festivities are over and kids are back at school in Jan, but I'll be nipping on and checking out recent posts regular again now I've given up work for a bit and can skive of chores with a brew when I like!
It's good to be home with you all lol!


Sent from my iPhone using Tapatalk

Welcome back claire, good to have you back Ian has been really pining for you, He will be a very happy man now

 

[Manicmama]

Good to see you, Claire!!! I can understand you being so busy with work and little ones and the health issues <3

Hiding your toppers for Christmas is a down and dirty trick LOL then again, if you've got the shakes, it's probably better you let them be as i've lost a few of the bits and pieces myself and their hell to find Worst case, if you keep the shakes for longer, order some FastTech pre-built coils and pull out the silical, twist the pre-made coil onto a screw or drill bit to open it up more and THEN get the hubby to slip your preferred wicking material through it =] Surely the hubby can get the legs on... well unless it's one of those with the ceramic cup and rubber stopper thingy LOL

Missing you girlie! <3

Miss you too my lovely!

Hopefully I'll be able to get on top of things now I'm not stressed with work.
Had I not developed the shakes I would of sweet talked him into letting me have the toppers by now, knowing my hands are misbehaving has lessened the excitement and urge to play. I'm hopeful for my GP sorting it, and if not then hubby better prepare to sit at YouTube revising unless he wants to sleep on the couch and do his own washing and cooking!
It's great being a ....., hahaha!


Sent from my iPhone using Tapatalk

 

[Manicmama]

Welcome back claire, good to have you back Ian has been really pining for you, He will be a very happy man now

Good to be back Terry, I've missed the lot of you!
What you got on order at the mo? Anything worth a ganders?
Aww, at least I can make someone happy - hahaha! You lot can skip my posts when I'm going on, the fella, the kids and even the dog are praying to go deaf or find my off switch lol!


Sent from my iPhone using Tapatalk

 

[terry w]

Good to be back Terry, I've missed the lot of you!
What you got on order at the mo? Anything worth a ganders?
Aww, at least I can make someone happy - hahaha! You lot can skip my posts when I'm going on, the fella, the kids and even the dog are praying to go deaf or find my off switch lol!


Sent from my iPhone using Tapatalk

You go on all you like claire we don`t mind Atty wise i am just waiting for my kraken now, which has been despatched to the uk. IN a bit of other news, i managed to stupidly break my rocket (stop laughing Ian)

Oh and i nearly forgot, i am doing a bit of research on the wire rope,with ekowool wrapped around where you place the coil. (looks awesome)

 

[trouble1000]

Sorry to say this will be my only post tonight. I can hear Terry cheering already

We've got a new management initiative at work called "Job Chats" so I've got a pile of feedback forms I need to fill in before tomorrow

I've managed to scrub the Kayfun clone and get rid of the washing up liquid. Built a 1.7 ohm macro-coil (1mm diameter), stuck some cotton in it and popped it on the Kayfun. Filled up with some Triphammer "White Gems" - absolutely gorgeous vape. I'm slowly cranking up the power on the Vamo to see what it can take - 8.5 watts at the moment - there's fog in the living room The flavour is amazing, fizzy, sweet, fruity and chocolatey all in one. I had my last toke on it 5 minutes ago and I can still taste it now. I'd say this clone is 99.99% as good as the KFL. I'll have to put the same juice in both and do a proper taste test.

================================

Anyway :

Lisa, make sure Hubby doesn't pinch all your toys, tell him to buy his own Nice picture of the set up too.

Claire, great to see you back, we've all missed you. I've got the parts from Lisa, so we'll sort out postage after chrimbo once things have calmed down a bit. I really hope you get things sorted out at the Quacks - take a lunch box in with you and a sleeping bag, tell him your staying there until they get you sorted out

Terry, put the mole grips down and walk away slowly

=====================================

Well that's my lot for now, better get these forms done. See you all later. Fri, Sat, Sun and Mon off work for me, can't wait

 

[terry w]

Sorry to say this will be my only post tonight. I can hear Terry cheering already

We've got a new management initiative at work called "Job Chats" so I've got a pile of feedback forms I need to fill in before tomorrow

I've managed to scrub the Kayfun clone and get rid of the washing up liquid. Built a 1.7 ohm macro-coil (1mm diameter), stuck some cotton in it and popped it on the Kayfun. Filled up with some Triphammer "White Gems" - absolutely gorgeous vape. I'm slowly cranking up the power on the Vamo to see what it can take - 8.5 watts at the moment - there's fog in the living room The flavour is amazing, fizzy, sweet, fruity and chocolatey all in one. I had my last toke on it 5 minutes ago and I can still taste it now. I'd say this clone is 99.99% as good as the KFL. I'll have to put the same juice in both and do a proper taste test.

================================

Anyway :

Lisa, make sure Hubby doesn't pinch all your toys, tell him to buy his own Nice picture of the set up too.

Claire, great to see you back, we've all missed you. I've got the parts from Lisa, so we'll sort out postage after chrimbo once things have calmed down a bit. I really hope you get things sorted out at the Quacks - take a lunch box in with you and a sleeping bag, tell him your staying there until they get you sorted out

Terry, put the mole grips down and walk away slowly

=====================================

Well that's my lot for now, better get these forms done. See you all later. Fri, Sat, Sun and Mon off work for me, can't wait

Ian you know i have been doing some research on the wire rope ? Well in the process of looking how to thread the rope through the wick, i found out that if you shove a nail through the length of wick then torch it, take the nail or drill bit out and it has formed a hole straight through the centre.

It was then i remembered you asking about threading cotton through ekowool, and there is your answer mate.

EDIT: i have been talking to dillpickle on the rba thread, and after getting some good advice i have just ordered some 2mm rope. Hopefully i will be trying this wicking method on saturday in my I atty.

One other thing i have noticed regarding the taifun is that it is very deceiving. I now know what you meant by a tank of juice lasting forever mate. I started to get a burned taste, and it looked like the tank was still full and after opening it to fill up, i got at least another 3 ml in there.

It must be that pressure thing again, pushing the liquid up the side of the tank which makes it look like there is more in than there really is.

 

[lisancentraltx]

Well, my beloved Brits... I've dropped the magnificent topper that I received yesterday, the RG400 [https://www.fasttech.com/p/1536500] on my walk tonight :'( Popped a triangle out of the glass tube and spilled my Rainbow Sherbet on the concrete sidewalk :'( I'll order 1-2 more and find additional glass tanks at some point :/ I've checked all of my tank tubes, from Pyrex to polycarb and none fit the RG400 :/ The RG200 is the smaller version of the RG400, so I have Rainbow Sherbet in it on an eGo =] At some point I'll check the RG500s that I got from HC https://www.fasttech.com/products/1411/10006479/1497904-rg500-bottom-coil-glassomizer-5-0ml and see if I can get the glass tube out of it =]

When I got off of work and was was parking tonight I spied USPS men going through the apartment complex with packages... pretty late for them to be delivering =] I received two of my packages, actually ONE package that had been split LOL

Taifun GT Style Rebuildable Atomizer (5.0mL) https://www.fasttech.com/p/1527301
Kraken Genesis Style Rebuildable Atomizer (2.5mL) https://www.fasttech.com/p/1530400
RG200 Bottom Coil Clearomizer (2.0mL) https://www.fasttech.com/p/1528500

The Taifun looks magnificently DIFFICULT, so I'll be leaving it alone until I've watched some videos =]

Charging my work eGos and found the charger dead... it's just a year old. Put in another eGo charger and WOW HOT! HOT! HOT! Trashed that charger. I've got a 900mAh charger on now and it seems fine, but I'll watch it closely.

I have so much organizing to do with my vape gear :/ I need to clean toppers from 2 - 3 weeks ago, make coils, and organize my drawers...

I'm ready for a bit of a break from work... it seems like it is going sooooooooooooooooooooo slowly :/ The girl that works along side of me has taken another job closer to the school she wants to get her Masters degree. Today was her going-away party :/ I'll miss her dreadfully as she is very knowledgeable and helpful in training me in the new department :/

 

[terry w]

Well, my beloved Brits... I've dropped the magnificent topper that I received yesterday, the RG400 [https://www.fasttech.com/p/1536500] on my walk tonight :'( Popped a triangle out of the glass tube and spilled my Rainbow Sherbet on the concrete sidewalk :'( I'll order 1-2 more and find additional glass tanks at some point :/ I've checked all of my tank tubes, from Pyrex to polycarb and none fit the RG400 :/ The RG200 is the smaller version of the RG400, so I have Rainbow Sherbet in it on an eGo =] At some point I'll check the RG500s that I got from HC https://www.fasttech.com/products/1411/10006479/1497904-rg500-bottom-coil-glassomizer-5-0ml and see if I can get the glass tube out of it =]

When I got off of work and was was parking tonight I spied USPS men going through the apartment complex with packages... pretty late for them to be delivering =] I received two of my packages, actually ONE package that had been split LOL

Taifun GT Style Rebuildable Atomizer (5.0mL) https://www.fasttech.com/p/1527301
Kraken Genesis Style Rebuildable Atomizer (2.5mL) https://www.fasttech.com/p/1530400
RG200 Bottom Coil Clearomizer (2.0mL) https://www.fasttech.com/p/1528500

The Taifun looks magnificently DIFFICULT, so I'll be leaving it alone until I've watched some videos =]

Charging my work eGos and found the charger dead... it's just a year old. Put in another eGo charger and WOW HOT! HOT! HOT! Trashed that charger. I've got a 900mAh charger on now and it seems fine, but I'll watch it closely.

I have so much organizing to do with my vape gear :/ I need to clean toppers from 2 - 3 weeks ago, make coils, and organize my drawers...

I'm ready for a bit of a break from work... it seems like it is going sooooooooooooooooooooo slowly :/ The girl that works along side of me has taken another job closer to the school she wants to get her Masters degree. Today was her going-away party :/ I'll miss her dreadfully as she is very knowledgeable and helpful in training me in the new department :/

I found my taifun one of the easier builds for an rba, In fact i had it coiled, wicked and filled in under 10 minutes.

EDIT: My caravela has landed in the uk.

 

[lisancentraltx]

I found my taifun one of the easier builds for an rba, In fact i had it coiled, wicked and filled in under 10 minutes.

EDIT: My caravela has landed in the uk.

I'll be playing with the new Taifun once I start my holiday... too crazy for me now. I need to clean my desk off and get all of the bits and pieces organized. I am seriously considering a fish and tackle box with all of the small compartments to hold the screws, toppers, spare glass tubes and such...

 

[trouble1000]

Ian you know i have been doing some research on the wire rope ? Well in the process of looking how to thread the rope through the wick, i found out that if you shove a nail through the length of wick then torch it, take the nail or drill bit out and it has formed a hole straight through the centre.

It was then i remembered you asking about threading cotton through ekowool, and there is your answer mate.

EDIT: i have been talking to dillpickle on the rba thread, and after getting some good advice i have just ordered some 2mm rope. Hopefully i will be trying this wicking method on saturday in my I atty.

One other thing i have noticed regarding the taifun is that it is very deceiving. I now know what you meant by a tank of juice lasting forever mate. I started to get a burned taste, and it looked like the tank was still full and after opening it to fill up, i got at least another 3 ml in there.

It must be that pressure thing again, pushing the liquid up the side of the tank which makes it look like there is more in than there really is.

That's a great tip mate thanks for that. I'll give that a try at some point. Probably easier than the straw idea, but their both good ideas still.

Have you ordered the rope pre-cut mate, or are you going to cut it yourself ??

It can be deceiving the pressure difference in the tank. To be honest, I can vape the KFL with the stainless tank and you just know when it needs refilling. The taste changes drastically, lot less vapour, dry hits and the noise is different. It's like using a battery that's about to lose it's charge, but you also get dry hits.

Well, my beloved Brits... I've dropped the magnificent topper that I received yesterday, the RG400 [https://www.fasttech.com/p/1536500] on my walk tonight :'( Popped a triangle out of the glass tube and spilled my Rainbow Sherbet on the concrete sidewalk :'( I'll order 1-2 more and find additional glass tanks at some point :/ I've checked all of my tank tubes, from Pyrex to polycarb and none fit the RG400 :/ The RG200 is the smaller version of the RG400, so I have Rainbow Sherbet in it on an eGo =] At some point I'll check the RG500s that I got from HC https://www.fasttech.com/products/1411/10006479/1497904-rg500-bottom-coil-glassomizer-5-0ml and see if I can get the glass tube out of it =]

When I got off of work and was was parking tonight I spied USPS men going through the apartment complex with packages... pretty late for them to be delivering =] I received two of my packages, actually ONE package that had been split LOL

Taifun GT Style Rebuildable Atomizer (5.0mL) https://www.fasttech.com/p/1527301
Kraken Genesis Style Rebuildable Atomizer (2.5mL) https://www.fasttech.com/p/1530400
RG200 Bottom Coil Clearomizer (2.0mL) https://www.fasttech.com/p/1528500

The Taifun looks magnificently DIFFICULT, so I'll be leaving it alone until I've watched some videos =]

Charging my work eGos and found the charger dead... it's just a year old. Put in another eGo charger and WOW HOT! HOT! HOT! Trashed that charger. I've got a 900mAh charger on now and it seems fine, but I'll watch it closely.

I have so much organizing to do with my vape gear :/ I need to clean toppers from 2 - 3 weeks ago, make coils, and organize my drawers...

I'm ready for a bit of a break from work... it seems like it is going sooooooooooooooooooooo slowly :/ The girl that works along side of me has taken another job closer to the school she wants to get her Masters degree. Today was her going-away party :/ I'll miss her dreadfully as she is very knowledgeable and helpful in training me in the new department :/

Sounds like you've been working too hard Lisa - I know that feeling myself

Your not having a lot of luck with tanks and chargers, but at least you've got some new toys to play with now. As Terry says the Taifun looks like a complicated build, but to be honest, it's not all that different to the fogger or kayfun. You'll be fine with it

===================

I'm still loving this kayfun clone. Almost a full tank down on this cotton wick, no flooding, no leaks, great flavour and vapour - really impressed

 

[terry w]

That's a great tip mate thanks for that. I'll give that a try at some point. Probably easier than the straw idea, but their both good ideas still.

Have you ordered the rope pre-cut mate, or are you going to cut it yourself ??

It can be deceiving the pressure difference in the tank. To be honest, I can vape the KFL with the stainless tank and you just know when it needs refilling. The taste changes drastically, lot less vapour, dry hits and the noise is different. It's like using a battery that's about to lose it's charge, but you also get dry hits.



Sounds like you've been working too hard Lisa - I know that feeling myself

Your not having a lot of luck with tanks and chargers, but at least you've got some new toys to play with now. As Terry says the Taifun looks like a complicated build, but to be honest, it's not all that different to the fogger or kayfun. You'll be fine with it

===================

I'm still loving this kayfun clone. Almost a full tank down on this cotton wick, no flooding, no leaks, great flavour and vapour - really impressed

I will be cutting my own ian, don`t ask me how LOL. The guy in that vid i posted just used craft scissors, so i will try that way first; and if that fails i will head for the old toolbox

 

[trouble1000]

I will be cutting my own ian, don`t ask me how LOL. The guy in that vid i posted just used craft scissors, so i will try that way first; and if that fails i will head for the old toolbox

Well I hope it works out well for you mate. A decent set of snips should do the trick too.

I've had a bloody sore throat all day today. But I've got 4 days off work now to get over it

 

[terry w]

Well I hope it works out well for you mate. A decent set of snips should do the trick too.

I've had a bloody sore throat all day today. But I've got 4 days off work now to get over it

You`re vaping too much mate LOL, Seriously though have a good gargle with tsp in warm water and that will help.

 

[trouble1000]

You`re vaping too much mate LOL, Seriously though have a good gargle with tsp in warm water and that will help.

I think I'm just a bit run down to be honest mate. I've got a cold sore coming out too - only ever get them when I've been doing too much. Should be fine tomorrow after a good nights kip.

Think I'll chill out and watch a bit of TV now anyway. See you all later