Anyone here used fasttech.

[trouble1000]

.... diver more like

Believe it or not, I actually did my PADI open water course on my honeymoon in the Caribbean. The Wife was a bit gutted, cos it was a 3 day course. Then I did my PADI Advanced course in Turkey a few years later - means I'm qualified to dive to a depth of 30 metres, which is a long way down. You get into trouble at the depth and basically, you either sort the problem out or you die

I used to do a fair bit of diving over here in quarries and also the sea in Anglesey.

 

[terry w]

Believe it or not, I actually did my PADI open water course on my honeymoon in the Caribbean. The Wife was a bit gutted, cos it was a 3 day course. Then I did my PADI Advanced course in Turkey a few years later - means I'm qualified to dive to a depth of 30 metres, which is a long way down. You get into trouble at the depth and basically, you either sort the problem out or you die

I used to do a fair bit of diving over here in quarries and also the sea in Anglesey.

Sounds very interesting mate, is this the reason you are allways having a bath ?? Can`t get enough of the h20.

 

[trouble1000]

Sounds very interesting mate, is this the reason you are allways having a bath ?? Can`t get enough of the h20.

Yep I normally go in with my wet suit on

It's just one of those things I always wanted to do.

I have a sort of bucket list :

Scuba Diving
Driving a Bus
Driving a Lorry
Abseiling
Flying a Plane
Driving a very fast car
Winning the lottery jackpot

I've done 5 out of the 7 so far - don't think the other 2 will ever happen

 

[lisancentraltx]

Saw here that the Taifun was vaping well, so I had another go at my girl =] Watched Todd closely, built her, kept getting sub-ohms, watched Todd AGAIN and saw that I failed to pull her gate up :/ Rebuilt her again and kept her oHms at 1.4 =] Then she kept burning the Ekowool... then she flooded, then I saw a black o-ring come from the screw that touches the mods firing pin =] Now the hussy is showing 0.3 oHm and I'm done with her for the night LOLOLOL

I did get a few glimpses of her numbers and such and I think it's the real deal and not a clone... Next time you get a look at your Taifun number, let me know =]

I pulled out some juice last night, a vendor's 'Pear' and when I was filling a topper I saw a *bloop* of something come out of the tip. I couldn't see anything in the topper, but I've been a bit off today, so I'll be throwing it away. No telling when it was made, and although CLEAR, it was a freebie from a classie ad, so I'm dumping it :/

Off to pick out a tobacco vape... I'm about ready to CHEW real tobacco, so I need a soothing vape or else

 

[terry w]

Yep I normally go in with my wet suit on

It's just one of those things I always wanted to do.

I have a sort of bucket list :

Scuba Diving
Driving a Bus
Driving a Lorry
Abseiling
Flying a Plane
Driving a very fast car
Winning the lottery jackpot

I've done 5 out of the 7 so far - don't think the other 2 will ever happen

Well as meatloaf said (you know the rest) EDIT: The wire rope was posted this morning mate, so fingers crossed you will get it tomorrow.

 

[trouble1000]

Saw here that the Taifun was vaping well, so I had another go at my girl =] Watched Todd closely, built her, kept getting sub-ohms, watched Todd AGAIN and saw that I failed to pull her gate up :/ Rebuilt her again and kept her oHms at 1.4 =] Then she kept burning the Ekowool... then she flooded, then I saw a black o-ring come from the screw that touches the mods firing pin =] Now the hussy is showing 0.3 oHm and I'm done with her for the night LOLOLOL

I did get a few glimpses of her numbers and such and I think it's the real deal and not a clone... Next time you get a look at your Taifun number, let me know =]

I pulled out some juice last night, a vendor's 'Pear' and when I was filling a topper I saw a *bloop* of something come out of the tip. I couldn't see anything in the topper, but I've been a bit off today, so I'll be throwing it away. No telling when it was made, and although CLEAR, it was a freebie from a classie ad, so I'm dumping it :/

Off to pick out a tobacco vape... I'm about ready to CHEW real tobacco, so I need a soothing vape or else

Stick with it Lisa. Once it's set-up right my Taifun is a great vape. Not sure how well it compares to the clone, but my genuine Taifun is a superb vape. I found it a lot easier to set-up than the Fogger, but that's just me.

Most juices have a recommended shelf life of about 12 months. But I think it will last a lot longer of it's frozen. I think it's more a case of the nic losing it's potency than anything else.

Well as meatloaf said (you know the rest)

Bat out of Hell - great album that one mate

 

[daz2013]

My kraken said 15days to ship 6/1/2014 so I was shocked when today it had shipped.

The rocket is good I wouldn't say it leaks more like just oozes a little. It looks like it's from the bottom tank seal
Other than that I don't think it's a good looking Atty but
Just wanted to see what these perform like before getting
The kayfun clone

Sent from my Hudl HT7S3 using Tapatalk

 

[terry w]

My kraken said 15days to ship 6/1/2014 so I was shocked when today it had shipped.

The rocket is good I wouldn't say it leaks more like just oozes a little. It looks like it's from the bottom tank seal
Other than that I don't think it's a good looking Atty but
Just wanted to see what these perform like before getting
The kayfun clone

Sent from my Hudl HT7S3 using Tapatalk

All i did with my rocket (before i broke it) was put a new bottom seal in, dry as a bone after i did that.

 

[e-pipeman]

Apologies I live on the water and most of the time i have an intermittent internet connection and write at times abbreviated words!

Here is a Rainbow Heaven Hercules, its an Ithaka clone

I was just asking what ever RBA you use do they vape different between the MVP and Vamo at the same VW power output the SVD seems to be smoother i kind of assumed because there both made by innokin there power delivery would be the same. I see you say rougher on the Vamo and smoother on the MVP.

I guess i need to measure and analyse outputs from each unit or watch Busardos YouTube reviews for each unit.

Cheers!




Hail the almighty Yuan, Long live the dragon vapemail!

As Yoda may of said 'May the vape be you!'
Seeking the vaping nirvana since the 30th September 2013
Vape on!

I find that the Igo-L seems to work even better on the MVP than it does on the Vamo.

 

[e-pipeman]

Wondered where you'd got to. Whereabouts in Egypt did you go to ??

I've always fancied going there myself - mainly for the diving (I'm a qualified Advanced Diver), so Egypt and the Great Barrier Reef are 2 places I have to go to at some point.

Dahab. GREAT house reef. About a mile from The Canyon and another mile from The Blue Hole. I snorkel so this was ideal for me - not quite up to Mackay Reef standards but still excellent coral and bucketloads of fish.

 

[trouble1000]

My kraken said 15days to ship 6/1/2014 so I was shocked when today it had shipped.

The rocket is good I wouldn't say it leaks more like just oozes a little. It looks like it's from the bottom tank seal
Other than that I don't think it's a good looking Atty but
Just wanted to see what these perform like before getting
The kayfun clone

Sent from my Hudl HT7S3 using Tapatalk

You and Terry must be lucky then Daz. My rocket leaked from every orifice imaginable.

Get the Kayfun clone though mate, you won't be disappointed. It's an amazing vape for the price.

Dahab. GREAT house reef. About a mile from The Canyon and another mile from The Blue Hole. I snorkel so this was ideal for me - not quite up to Mackay Reef standards but still excellent coral and bucketloads of fish.

A friend of mine that dives has done the Blue Hole. He said it was amazing, a real once in a lifetime dive site. Next time you go snorkelling try taking some bananas with you. In the Caribbean, I took 3 bananas down with me to feed the fish. As soon as I unzipped the first one, the fish swarmed in like piranhas, they were even plucking ay my fingers once it had gone. It was a surreal experience. I even had them crowding around the pocket in my BCD that had the other 2 bananas in it.

 

[terry w]

I just rooted out my kick which i haven`t used for a while. when i re-coiled my taifun yesterday i made the ohm`s just a tad too high for my liking @ 1.8. rather than make a new coil (lazyness) LOL i just set the kick to 12 watts, stuck it in the chi, with the taifun on top and i swear i can see the liquid reducing in my taifun. gonna have to slow down a bit with this set up.

 

[lisancentraltx]

I have just purchased a ss/brass Neme, a ss/brass Chi You, and 2mm/3mm of ekowool from a supplier in the CaliVapes forum... My Christmas present to myself Hubby said he'd buy a mod for my Christmas present, so I bought myself another OUTSIDE of my typical FastTech purchases LOL

 

[trouble1000]

I just rooted out my kick which i haven`t used for a while. when i re-coiled my taifun yesterday i made the ohm`s just a tad too high for my liking @ 1.8. rather than make a new coil (lazyness) LOL i just set the kick to 12 watts, stuck it in the chi, with the taifun on top and i swear i can see the liquid reducing in my taifun. gonna have to slow down a bit with this set up.

So having a kick makes you lazy then, I'd better not get one You need to get a magic Taifun like mine mate where the juice never drops - you'll save an absolute fortune

Must admit though, I'm going through the juice pretty quickly on the Kayfun clone and there's still not a leak in sight. I can actually taste my juice again today. But typically, I'm back in work tomorrow - I get 4 days off and can't enjoy them properly

I have just purchased a ss/brass Neme, a ss/brass Chi You, and 2mm/3mm of ekowool from a supplier in the CaliVapes forum... My Christmas present to myself Hubby said he'd buy a mod for my Christmas present, so I bought myself another OUTSIDE of my typical FastTech purchases LOL

You'll have to start naming your mods soon Lisa, you'll have that many

Any idea what Hubby's gonna get you for Christmas ??

 

[trouble1000]

Well I've been researching some high end juices for the New Year.

Here's my current list :

Crystal Canyon Vapes
Alice in Vapeland
Heathers Heavenly Vapes
Innovapours for their fuZion range
Vaping King
Nicoticket (direct from the USA rather than the UK supplier)
SteamGunk

If anyone else has any suggestions I can add to the list, please let me know. As you know I like strong flavours with a lot of depth.

 

[terry w]

So having a kick makes you lazy then, I'd better not get one You need to get a magic Taifun like mine mate where the juice never drops - you'll save an absolute fortune

Must admit though, I'm going through the juice pretty quickly on the Kayfun clone and there's still not a leak in sight. I can actually taste my juice again today. But typically, I'm back in work tomorrow - I get 4 days off and can't enjoy them properly




You'll have to start naming your mods soon Lisa, you'll have that many

Any idea what Hubby's gonna get you for Christmas ??

Yes it does my mate, like i said if your ohm`s are too high/low stick a kick in and set the watts easy peasy LOl. i have got the kayfun in my wishlist mate is it this one you have got ? https://www.fasttech.com/products/0/10006473/1494700-svoemesto-kayfun-v3-1-es-styled-rebuildable

 

[trouble1000]

Yes it does my mate, like i said if your ohm`s are too high/low stick a kick in and set the watts easy peasy LOl. i have got the kayfun in my wishlist mate is it this one you have got ? https://www.fasttech.com/products/0/10006473/1494700-svoemesto-kayfun-v3-1-es-styled-rebuildable

Yep that's the one mate.

I might go for the sandblasted one next time :

$21.37 Kayfun v3.1 ES Styled Rebuildable Atomizer (4.5mL) - sandblasted stainless steel at FastTech - Worldwide Free Shipping

But I definitely would AVOID this one, chromed brass is a NO, NO :

$15.52 Kayfun v3.1 ES Styled Rebuildable Atomizer Kit (4.5mL) - chromed brass version at FastTech - Worldwide Free Shipping

 

[lisancentraltx]

Hubby has gotten me a set of speakers form my computer that I hadn't gotten around to picking out and a night gown LOL He said several times that vaping and collecting gear is a great pasttime for me and keeps me sane LOL I was a bit shocked that he said he'd buy me a high end mod for Christmas! Regardless, I got a couple of two toned ones that have good reviews. I intend to take him for a pedicure =] He's in steel toed boots at work and it'll be good for him to get them done while staring wide-eyed at a strange foreign girl kneeling at his feet XD We pretty much buy what we need when needed or save for the more expensive purchases, so there's not really anything that we need.

 

[terry w]

Yep that's the one mate.

I might go for the sandblasted one next time :

$21.37 Kayfun v3.1 ES Styled Rebuildable Atomizer (4.5mL) - sandblasted stainless steel at FastTech - Worldwide Free Shipping

But I definitely would AVOID this one, chromed brass is a NO, NO :

$15.52 Kayfun v3.1 ES Styled Rebuildable Atomizer Kit (4.5mL) - chromed brass version at FastTech - Worldwide Free Shipping

Yeah i may get the sandblasted one mate, it has got a lovely finish to it. and no i wouldn`t touch chromed brass mate.

 

[trouble1000]

Hubby has gotten me a set of speakers form my computer that I hadn't gotten around to picking out and a night gown LOL He said several times that vaping and collecting gear is a great pasttime for me and keeps me sane LOL I was a bit shocked that he said he'd buy me a high end mod for Christmas! Regardless, I got a couple of two toned ones that have good reviews. I intend to take him for a pedicure =] He's in steel toed boots at work and it'll be good for him to get them done while staring wide-eyed at a strange foreign girl kneeling at his feet XD We pretty much buy what we need when needed or save for the more expensive purchases, so there's not really anything that we need.

I could do with a pedicure myself - where's Claire when you need her

I pretty much live in boots myself. I wear them for work - in case I get any annoying passengers and at home with jeans.

It's good that he's so supportive though with your vaping. Have you finished work yet for Christmas ?? I've just got to work tomorrow (Christmas Eve) then that's me done for 2 days