Anyone here used fasttech.

[daz2013]

How do you find the topcap daz ?? mine is really stiff and a bit hard to turn, but it maybe just the newness of it.

I put it back together after cleaning and couldn't get the cap to push on turned out swapped the top 2 o/rings around as the top of the top tank seemed a little loose. all fine now the rings must be slightly different as the cap just clicks on now and got a good seal on the tank.
Airflow adjusting is a bit stiff but should wear in.
Just put a bit of juice around the seals for lubrication.
Changed the coil today 1.8 micro on mesh it's a lot better







Sent from my GT-S7500 using Tapatalk 2

 

[terry w]

Ran across this Cool Looking Spinner. Did some more looking and found some different ones. I ordered the second from the left in the picture below, the Dragon. Was $42.95 with freight. Said 7 to 20 days delivery, but coming from China I expect a month or so.

Here is the link I ordered from

X.Fire E-fire Wooden Variable Voltage battery 1000mah : Vision Electronic Cigarette, Original Manufacturers

Know nothing about them, but I funded my Paypal with my AMX so I have double protection if I don't get it. But I just thought they were really cool looking.

Vape On
Burnie

They are really nice them burnie, I am guessing you will get plenty of compliments on it`s looks.

 

[terry w]

I put it back together after cleaning and couldn't get the cap to push on turned out swapped the top 2 o/rings around as the top of the top tank seemed a little loose. all fine now the rings must be slightly different as the cap just clicks on now and got a good seal on the tank.
Airflow adjusting is a bit stiff but should wear in.
Just put a bit of juice around the seals for lubrication.
Changed the coil today 1.8 micro on mesh it's a lot better

View attachment 293282

View attachment 293284



Sent from my GT-S7500 using Tapatalk 2

It looks like you have blocked off one of the wick holes there daz ? what did you use ?. I also notice you have got the caravela coming your way, you will love it mate (hits really good)

 

[lukewheeler]

Not tried the grape, but I have had the watermelon - nice refreshing vape that one. It does need a couple of weeks steeping, so if it arrives quickly, I'd resist the urge and let it steep a little first.

The minty and chocolate vapes I've had to be honest they were cr*p, just not my taste. But I think Cody has had the mint and enjoyed it, so even though it's not to my taste, you might still enjoy it. Chocolate is another hard one to get right, I've tried a few and only really liked 2 of them, but again you might like it. Strawberry and tiramisu are both decent juices. The tiramisu does taste like a cakey, sweet, creamy cup of coffee. The strawberry is a bit on the mild side, but it's great in a dripper or mixed with another juice like pineapple.

These are just my experiences though, everyone is different.

Awesome, I'm excited to try the watermelon. Luckily the chocolate and mint are the two that I'm not so bothered about, so if they suck then hey, at least I didn't pay a lot for them! I may love them, though. I'm super excited to try the Tiramisu, probably more so than all the others so I'm glad to hear you like it. Strawberry was another haven't-had-this-flavour-before order, so we'll see!

Thanks for the help!

 

[lisancentraltx]

I've been fighting with a couple of leaking Protank2s all week to have an easy week without the more advanced toppers :/ I put them away to be cleaned this weekend because of the stupid leaking... Pulled out the Taifun GT and refilled it for a morning vape and OMG the clouds it produces with the mesh :/ I'm not really interested in clouds except to KNOW that the topper is working, but it is an excellent vape, I must admit. the Kraken is giving me a bit of a burned taste with an older juice :/

I got my KSD Novice in from FastTech with some longish drip tips yesterday and it's a cute little mod =] Realized it takes the 14500 batteries, which I don't have LOL Had to put in my first order of 2014 and got them stateside for quick shipping [I hope]. It's a tiny little mod and I am curious what kind of vape these 14500 batteries will give... they are AA size according to the site.

Mother in law is on death watch... they gave her 12 days and now she's in a coma, so the hubby is working 12-14 hours shifts and running back and forth to see her with the family. I'll be in and out just to get a breather from that... Couldn't get to sleep last night, so after waking 1.5 hours late, I walked the pup in the rain for a quick piddle and now I am strapped for time and have to get ready for my last workday of the week. Have a good day all, I'll catch up as I am able.

 

[trouble1000]

Ran across this Cool Looking Spinner. Did some more looking and found some different ones. I ordered the second from the left in the picture below, the Dragon. Was $42.95 with freight. Said 7 to 20 days delivery, but coming from China I expect a month or so.

Here is the link I ordered from

X.Fire E-fire Wooden Variable Voltage battery 1000mah : Vision Electronic Cigarette, Original Manufacturers

Know nothing about them, but I funded my Paypal with my AMX so I have double protection if I don't get it. But I just thought they were really cool looking.

Vape On
Burnie

I've only ever seen one of the skull designs before Burnie. But to be honest I like all of them - skulls and dragons

Let us know how long it takes to arrive, you never know you might be surprised - my last order from Desire Ecig in China, arrived in the UK in just over a week - now that is quick

Awesome, I'm excited to try the watermelon. Luckily the chocolate and mint are the two that I'm not so bothered about, so if they suck then hey, at least I didn't pay a lot for them! I may love them, though. I'm super excited to try the Tiramisu, probably more so than all the others so I'm glad to hear you like it. Strawberry was another haven't-had-this-flavour-before order, so we'll see!

Thanks for the help!

No problem Luke. As I said, you may love the mint, it's just not for me. I'd recommend the Dekang Pinneapple if you order again, it's lovely. Plus as Terry said, the Liqua berry mix is really nice too, tastes just like a famous blackurrant type drink

Let us know what you think of them when they arrive.

I've been fighting with a couple of leaking Protank2s all week to have an easy week without the more advanced toppers :/ I put them away to be cleaned this weekend because of the stupid leaking... Pulled out the Taifun GT and refilled it for a morning vape and OMG the clouds it produces with the mesh :/ I'm not really interested in clouds except to KNOW that the topper is working, but it is an excellent vape, I must admit. the Kraken is giving me a bit of a burned taste with an older juice :/

I got my KSD Novice in from FastTech with some longish drip tips yesterday and it's a cute little mod =] Realized it takes the 14500 batteries, which I don't have LOL Had to put in my first order of 2014 and got them stateside for quick shipping [I hope]. It's a tiny little mod and I am curious what kind of vape these 14500 batteries will give... they are AA size according to the site.

Mother in law is on death watch... they gave her 12 days and now she's in a coma, so the hubby is working 12-14 hours shifts and running back and forth to see her with the family. I'll be in and out just to get a breather from that... Couldn't get to sleep last night, so after waking 1.5 hours late, I walked the pup in the rain for a quick piddle and now I am strapped for time and have to get ready for my last workday of the week. Have a good day all, I'll catch up as I am able.

The Taifun is a cracker Lisa, I have to lower the nic juice when I use mine.

I've got the Novice in my wishlist too. My Vmod mini uses 14500 batteries, to be honest, I think you'll be surprised how long they last. Mine last a lot longer than any 650 ego type battery. You won't really notice any difference in vape quality from an 18650 type mod, the only difference is the battery charge won't last as long. I'd say the vape quality from my 14500 powered Vmod is almost as good as my Kayfun on any of my bigger mods. I'm pretty sure you'll like the Novice - good for a bit of stealth vaping.

Really sorry to hear about your Mother-in-Law, it must be a really stressful time for you and Hubby at the minute. I'll be thinking about you both and I'll send some positive vibes your way
If we don't see you on here for a while, it's totally understandable. Family is more important than any forum.

 

[trouble1000]

It looks like you have blocked off one of the wick holes there daz ? what did you use ?. I also notice you have got the caravela coming your way, you will love it mate (hits really good)

Hey Mr "ultra maker of fog" Have you had to change the SS rope yet ?? I can't believe how well mine seems to be holding up. I've run 4 tanks off it so far and it's still going strong - it's an everlasting wick

 

[daz2013]

It looks like you have blocked off one of the wick holes there daz ? what did you use ?. I also notice you have got the caravela coming your way, you will love it mate (hits really good)

the second wick hole is blocked off with the grub screw that came with it. in the pic it's just not screwed all the way in.
i was still getting a strange taste now and then so gave the top cap another good clean i think there might be some sort of lube between the two parts for the airflow. it tastes a lot better now more like it should and the coil is bedding in.
yes can't wait to get it on the caravela i think they look good together.

 

[terry w]

the second wick hole is blocked off with the grub screw that came with it. in the pic it's just not screwed all the way in.
i was still getting a strange taste now and then so gave the top cap another good clean i think there might be some sort of lube between the two parts for the airflow. it tastes a lot better now more like it should and the coil is bedding in.
yes can't wait to get it on the caravela i think they look good together.

I have got mine on my caravela, and they are a perfect match mate. how did you unscrew the grubscrew ? it looks like an allen key but it was shipped with a phillips screwdriver

And as for the funny taste mine had it untill i had run about 3 tankfulls, did you manage to take the topcap off to clean it ? if you did can you tell me how too, cos i can`t figure it out

 

[terry w]

I've only ever seen one of the skull designs before Burnie. But to be honest I like all of them - skulls and dragons

Let us know how long it takes to arrive, you never know you might be surprised - my last order from Desire Ecig in China, arrived in the UK in just over a week - now that is quick



No problem Luke. As I said, you may love the mint, it's just not for me. I'd recommend the Dekang Pinneapple if you order again, it's lovely. Plus as Terry said, the Liqua berry mix is really nice too, tastes just like a famous blackurrant type drink

Let us know what you think of them when they arrive.



The Taifun is a cracker Lisa, I have to lower the nic juice when I use mine.

I've got the Novice in my wishlist too. My Vmod mini uses 14500 batteries, to be honest, I think you'll be surprised how long they last. Mine last a lot longer than any 650 ego type battery. You won't really notice any difference in vape quality from an 18650 type mod, the only difference is the battery charge won't last as long. I'd say the vape quality from my 14500 powered Vmod is almost as good as my Kayfun on any of my bigger mods. I'm pretty sure you'll like the Novice - good for a bit of stealth vaping.

Really sorry to hear about your Mother-in-Law, it must be a really stressful time for you and Hubby at the minute. I'll be thinking about you both and I'll send some positive vibes your way
If we don't see you on here for a while, it's totally understandable. Family is more important than any forum.

Yeah, vimto

 

[terry w]

Hey Mr "ultra maker of fog" Have you had to change the SS rope yet ?? I can't believe how well mine seems to be holding up. I've run 4 tanks off it so far and it's still going strong - it's an everlasting wick

No mate, I`ve not touched anything since i built the i atty, or the kraken, and i hit them both hard every day LOL. I have lost count of how much juice i have run through them, but it is a bloody lot. That is why i am making so much fog

 

[trouble1000]

No mate, I`ve not touched anything since i built the i atty, or the kraken, and i hit them both hard every day LOL. I have lost count of how much juice i have run through them, but it is a bloody lot. That is why i am making so much fog

I'm gonna be trying out the aga on rope next week for sure mate. I've put the RSST on my Astro now (instead of the Paps), 18650s last a fair bit longer in the Astro than the 350s in the Paps.

Have you done anymore ordering mate ???

I'm saving a few LOTR inspired pictures at the moment to use as wraps on my mods. I'll get some ordered next month from jwraps. I'm just gonna get the Vamo, Vmod XL and 1 Vmod mini wrapped - think I'll keep the Provari red

 

[terry w]

I'm gonna be trying out the aga on rope next week for sure mate. I've put the RSST on my Astro now (instead of the Paps), 18650s last a fair bit longer in the Astro than the 350s in the Paps.

Have you done anymore ordering mate ???

I'm saving a few LOTR inspired pictures at the moment to use as wraps on my mods. I'll get some ordered next month from jwraps. I'm just gonna get the Vamo, Vmod XL and 1 Vmod mini wrapped - think I'll keep the Provari red

No not ordered anything mate, waiting on the kayfun, blowtorch, and liquids to arrive then i may be looking for a new mod ! How is the astro Ian ? does it give a good vape.

 

[trouble1000]

No not ordered anything mate, waiting on the kayfun, blowtorch, and liquids to arrive then i may be looking for a new mod ! How is the astro Ian ? does it give a good vape.

I got the Astro when I had my rebate points converted, so it only cost me about $14 dollars. It's one of the smallest mods (length wise) with an 18650 battery. Brass contacts all round, adjustable 510 and battery connector, plus it's telescopic. Mixed brass and stainless with a serial number, plus the knurling on the lock ring makes life easy. Also it's got ribs on the top and bottom so it doesn't slip out of your hand. Cracking little mod for the price mate :

https://www.fasttech.com/products/1467000

 

[Burnie]

Vape Mail today. Got my iTaste EP Cute little thing, here it is aginst the SVD, SID, eCab, then EP (without cap)

Vape On
Burnie

 

[trouble1000]

The only thing I forgot to mention is, you can't really use a bottom air fed atty on it like a Protank. You'll have to use something like a Kayfun or RSST with a top fed air system.

 

[trouble1000]

Vape Mail today. Got my iTaste EP Cute little thing, here it is aginst the SVD, SID, eCab, then EP (without cap)

Vape On
Burnie

Nice collection you've got going on there mate

How does the EP vape compared to the SVD set up ??

 

[terry w]

I got the Astro when I had my rebate points converted, so it only cost me about $14 dollars. It's one of the smallest mods (length wise) with an 18650 battery. Brass contacts all round, adjustable 510 and battery connector, plus it's telescopic. Mixed brass and stainless with a serial number, plus the knurling on the lock ring makes life easy. Also it's got ribs on the top and bottom so it doesn't slip out of your hand. Cracking little mod for the price mate :

https://www.fasttech.com/products/1467000

I will consider that Ian when i go to order a new one. Thing is i prefer the 18350 mods me, the caravela is an exellent sized mod it fits perfectly in my hand, without feeling too uncomfortable if you know what i mean.

 

[daz2013]

I have got mine on my caravela, and they are a perfect match mate. how did you unscrew the grubscrew ? it looks like an allen key but it was shipped with a phillips screwdriver

And as for the funny taste mine had it untill i had run about 3 tankfulls, did you manage to take the topcap off to clean it ? if you did can you tell me how too, cos i can`t figure it out

i was drilling the tube out and it rattled out lol. it is a allen key but don't know the size i'll have a look at work to see.
no didn't split the top airflow just some hot water and a really good rinse.

 

[Burnie]

Nice collection you've got going on there mate

How does the EP vape compared to the SVD set up ??

Vapes nice. Draw is a little tight, and as your mouth is really close to the top coil it is a little warm, but not bad. Looking at the iClear 10 there is no way I can see to rebuild it, or for that matter clean and dry burn. Inside the tank it is all metal, the silicone is in the mouthpiece. Once it clogs up, which will be a while with limited use, I am going to try to take it apart. Did fine some smaller ones at FT and ordered 5 of them, along with some other stuff I really didn't need.
$2.04 Electronic Cigarette Round Mouth Atomizer
One thing I like about the EP, the 510 connection is spring loaded, can't screw an atty down too much and push the pin down. Not sure why they didn't do that with the VV V3.0. Or for that matter why everyone doesen't do it, then you wouldn't have to pry it up when you screwed something down too much.

Vape On
Burnie