Anyone here used fasttech.

[terry w]

You need a steady hand mate to do this, make sure you constantly make a good connection with the wire, or the readings will jump all over. Also, move the pos probe very slowly.

Like I said, I only do this as a guide for wire length, it's not an exact science mate

LOL yeah, I won`t bother i think mate;

I have managed thus far without doing it mate. I am just happy that i can now check my batteries and atties, Thanks for pointing me in the right direction mate.

 

[trouble1000]

LOL yeah, I won`t bother i think mate;

I have managed thus far without doing it mate. I am just happy that i can now check my batteries and atties, Thanks for pointing me in the right direction mate.

No problem Terry. You know it's an option anyway now.

Also do you know how to check the quadrangle perambulator on the multifunction mech mod with a multimeter

 

[terry w]

No problem Terry. You know it's an option anyway now.

Also do you know how to check the quadrangle perambulator on the multifunction mech mod with a multimeter

Yeah,

That is in the tampon waffler setting isn`t it ?

 

[terry w]

well you can tell its quiet tonight Ian,

We are both talking CRAP now mate.

 

[trouble1000]

well you can tell its quiet tonight Ian,

We are both talking CRAP now mate.

That's all I normally talk anyway mate

Anyway, got another LLLOOONNGGG day tomorrow

Just been watching that new "sleepy hollow" series that's just started, looks like it might be a good one. Did you see it mate ??

 

[lisancentraltx]

Heh! Both of you are tired after work and perhaps ishtfaced =] Me, I am dutifully working my 9 hours, diligently entering data from these feedback forms, and just peeking to ECF occasionally

 

[terry w]

That's all I normally talk anyway mate

Anyway, got another LLLOOONNGGG day tomorrow

Just been watching that new "sleepy hollow" series that's just started, looks like it might be a good one. Did you see it mate ??

no i havn`t Ian,

What channel is it on ?

 

[terry w]

Heh! Both of you are tired after work and perhaps ishtfaced =] Me, I am dutifully working my 9 hours, diligently entering data from these feedback forms, and just peeking to ECF occasionally

You naughty girl,

Get back to work LOL

 

[trouble1000]

Heh! Both of you are tired after work and perhaps ishtfaced =] Me, I am dutifully working my 9 hours, diligently entering data from these feedback forms, and just peeking to ECF occasionally

Naughty, naughty. You should be concentrating only on work

I'm actually sober, I don't drink when I'm driving the next day. They do random breath tests at work, so we've got to be really careful

Did you read that e-book yet Lisa ??

 

[terry w]

Oh by the way,

I think my vamo is knackered now as well (Threads again ) i can`t get some tanks on it, and it has stopped reading resistance I`m not too bothered cos it was a freebie from vaporbreak, so didn`t cost me a penny; and i have had many months use out of it.

 

[lisancentraltx]

The audiobook I picked up yesterday? I will listen to it this weekend =] I have several copies of the printed version =]

Ya, if my boss wasn't so busy searching for and printing recipes for her next 2 days off, then I'd be worried LOL She's already sent us an email saying she'd be back Monday Nah, we get a couple of 15 minute breaks and I don't take them or a lunch, plus I come in early, so they do get their pound of flesh from me

 

[trouble1000]

Oh by the way,

I think my vamo is knackered now as well (Threads again ) i can`t get some tanks on it, and it has stopped reading resistance I`m not too bothered cos it was a freebie from vaporbreak, so didn`t cost me a penny; and i have had many months use out of it.

I've heard that the chipset in the vamo does come loose eventually, so that's probably what's happened mate. I believe the chip is quite loosely fixed in place, but it's a pain to take the mod apart to fix it - you normally end up marking the topcap badly to get at the chip.

Looks like you'll have to get a V3 from FT mate

 

[trouble1000]

The audiobook I picked up yesterday? I will listen to it this weekend =] I have several copies of the printed version =]

Ya, if my boss wasn't so busy searching for and printing recipes for her next 2 days off, then I'd be worried LOL She's already sent us an email saying she'd be back Monday Nah, we get a couple of 15 minute breaks and I don't take them or a lunch, plus I come in early, so they do get their pound of flesh from me

Yep that's the audiobook I meant Lisa, hope you enjoy it.

Anyway, we all thought you were really, really busy when working - but no proper breaks, that is putting the hours in. At least when I do long shifts, I have to have breaks by law. I make sure I take them as well, I can easily stretch a 10 min break out to 20 mins

 

[trouble1000]

Well that's me done for the night now.
Early start again tomorrow, so I need my 6 hours sleep.

See you all later, take care and vape on

 

[terry w]

I've heard that the chipset in the vamo does come loose eventually, so that's probably what's happened mate. I believe the chip is quite loosely fixed in place, but it's a pain to take the mod apart to fix it - you normally end up marking the topcap badly to get at the chip.

Looks like you'll have to get a V3 from FT mate

Yes it is the threads as well ian,

It just won`t accept some of my tanks ! Ah well i will give it a good send off tomorrow straight in the green bin LOL regarding getting another one, I think i will pass. I have found myself moving away from regulated mods these days. PITA with the 5 10 second cut off, I much prefer mechs for that reason, lovely long draws.

 

[lisancentraltx]

Rest easy =]

I am due on the main desk, so I've just completed another packet and will now begin closing program windows....


Until I see the lay of the land at the desk

 

[trouble1000]

Sent from my HTC Wildfire S A510e using Tapatalk 2

 

[trouble1000]

Sent from my HTC Wildfire S A510e using Tapatalk 2

 

[lisancentraltx]

View attachment 259966

Sent from my HTC Wildfire S A510e using Tapatalk 2

Nice RED Reo =] I like the topper on the second to the last one from the right and the tip on the Sentinel =]

the Reo is a nice size there I've never looked at them XD

 

[terry w]

Well that's me done for the night now.
Early start again tomorrow, so I need my 6 hours sleep.

See you all later, take care and vape on

night mate. Good looking collection there Ian