he he we have all done it cody
Anyone here used fasttech.
- Thread starter trouble1000
- Start date
- th_trl_thread_readers 0
- Status
he he we have all done it cody
So I don't need to wrap the ends of my coil around the screwhead? Heh! I have to watch some vids LOL I have noticed the holes in the screw tubes and wondered about them LOL
You have a better eye for these things than me Lisa... it looks ok i thought
There is a silver version on FT too, so i think it is that one in the pic you linked.
You have a better eye for these things than me Lisa... it looks ok i thought
Doesn't Terry have the Gold? He'll know for sure and better than a squonky picture... I'd been testing my super watch repair glasses [can be had from Fasttech =] and took a close look at my gold TVS... one section at the end is pitted and green :'( Broke my heart, although it is too heavy to use with my hands I thought the delicate care I'd taken of it would keep it nice for a long while.
Yes my sentinel is sat looking rather pityful, in the corner while all my other mods are getting all the attention.
Yes my sentinel is sat looking rather pityful, in the corner while all my other mods are getting all the attention.
I dont even like to screw a tank on top of my ba gua because it leaves tiny little scratches lol. Anyhooo... I've ordered the trident and some of the pre-wrapped coils. If the coils are rubbish it's Lisa's fault, if the trident is rubbish it's Terry's fault and if the order doesnt arrive within 2 weeks then anybody's fault except mine
Yes my sentinel is sat looking rather pityful, in the corner while all my other mods are getting all the attention.
You know that Fasttech sells the new top for the Sentinel, but the reviews say the threads are mushy on it as well :/ I am saving the Sentinel pieces to start swapping tops, middles, and bottoms to be honest =] In the Pictures of your Setup thread they have some really nice mods with switched parts! I just hadn't gotten around to checking to see how many of them are the same diameter and can be traded out.
I dont even like to screw a tank on top of my ba gua because it leaves tiny little scratches lol. Anyhooo... I've ordered the trident and some of the pre-wrapped coils. If the coils are rubbish it's Lisa's fault, if the trident is rubbish it's Terry's fault and if the order doesnt arrive within 2 weeks then anybody's fault except mine
Bollocks! You've a wife to train you to do tricks and make purchases! No need to follow my lead
Last edited:
Nope none of that lisa,
All you have to do is drop the coil legs into the slots, and screw down. REAL EASY and a very good idea.
LOL, no worries
To be honest, if the FT ones work out ok then i'll just stick with them as i really arent much cop with this kind of thing... too small and fiddly for me!
Have you got an Octopus? An absolute doddle to rebuild, largely because it's big, the posts have holes in them to put your nichrome through and the screws are finger-tightening so you don't even need a screwdriver!
Having said that the dual-coil set-up that came with my igo-l from FT is still rocking. I won't replace it until it dies.
Hahahaha! I thought 'octopus' was a term for a 'looped' coil! An Octopus is a RDA! I have several of these from Fasttech!! OMGoodness, I have certainly learned quite a bit about my FT gear on this short break I've been on XD
no i got the plain silver one lisa,
Still sexy as hell though
That's how I feel when I look at the AGA T2 =] If she doesn't give me a good vape this weekend I'll be divorcing her, though... no excuses
if I can get the Fasttech RDA/RBAs coiled and vaping great then the REAL THINGS should be working as hard!
Last edited:
I nearly bought the igo-l just a minute ago, but settled on the trident from FT, although i will prob pick up the octopus and the igo-l at a later date too
You know that Fasttech sells the new top for the Sentinel, but the reviews say the threads are mushy on it as well :/ I am saving the Sentinel pieces to start swapping tops, middles, and bottoms to be honest =] In the Pictures of your Setup thread they have some really nice mods with switched parts! I just hadn't gotten around to checking to see how many of them are the same diameter and can be traded out.
Bollocks! You've a wife to train you to do tricks and make purchases! No need to follow my lead
No wife here, and preferably no difficult coiling either, i prefer things calm and laid back
I dont even like to screw a tank on top of my ba gua because it leaves tiny little scratches lol. Anyhooo... I've ordered the trident and some of the pre-wrapped coils. If the coils are rubbish it's Lisa's fault, if the trident is rubbish it's Terry's fault and if the order doesnt arrive within 2 weeks then anybody's fault except mine
LOL i like your way of thinking mate.
Honestly you can`t go wrong with the trident, Even with sausage fingers.
I'll get a proper price sorted Terry for the RSST and a spare tank. They are the genuine smoketech ones too mate.
The thing I like about them is they have a spring on the positive post that you push down to trap the pos coil leg. Also the tank has a sealed bottom, almost like a cup, so there'll be no leaks and the positive post can be screwed in or out to get a good contact with the battery. Also the coil hole is insulated and you can have the wick touching the bottom of the tank with it being a sealed end on the tank.
God, I should be a salesman
The thing I like about them is they have a spring on the positive post that you push down to trap the pos coil leg. Also the tank has a sealed bottom, almost like a cup, so there'll be no leaks and the positive post can be screwed in or out to get a good contact with the battery. Also the coil hole is insulated and you can have the wick touching the bottom of the tank with it being a sealed end on the tank.
God, I should be a salesman
No wife here, and preferably no difficult coiling either, i prefer things calm and laid back
Plus no-one to moan when you get 8 parcels a week coming in
That's how I feel when I look at the AGA T2 =] If she doesn't give me a good vape this weekend I'll be divorcing her, though... no excuses
Marriage guidance time I think Lisa. You can't divorce such a sexy looking topper
Just sit and admire it, it's a thing of beauty
Plus no-one to moan when you get 8 parcels a week coming in
True, although if FT did a Scarlett Johannson clone i'd probably add it to my next order
Oh shizer.
Just checked my diary for tomorrow, I have to be up for 4am
Take the first bus out of the depot at 4.45 am, who the hell catches a bus at that time on a saturday morning
Guess, I'd better go and get my 4 hours sleep then
Night all.
Just checked my diary for tomorrow, I have to be up for 4am
Take the first bus out of the depot at 4.45 am, who the hell catches a bus at that time on a saturday morning
Guess, I'd better go and get my 4 hours sleep then
Night all.
I'll get a proper price sorted Terry for the RSST and a spare tank. They are the genuine smoketech ones too mate.
The thing I like about them is they have a spring on the positive post that you push down to trap the pos coil leg. Also the tank has a sealed bottom, almost like a cup, so there'll be no leaks and the positive post can be screwed in or out to get a good contact with the battery. Also the coil hole is insulated and you can have the wick touching the bottom of the tank with it being a sealed end on the tank.
God, I should be a salesman
Okay, you've convinced me as well =] I am definitely testing the RSST out this weekend
I've got to check the spring on the positive post... I'd already noticed the 'cup' style when I had it soaking =] The rest means nothing to me XD I've got to head to the desk, so each of you have a magnificent night and beginning of the weekend =] I'll pop on a bit later when I've run the others off.Mayhaps I should check out the mesh coil that Fasttech has begun shipping with their toppers. They are selling it now, so when it's already installed it should be ready to vape, no? Otherwise they should package it apart...
- Status
Similar threads
- Locked
