Does sound painful mate, having a damaged private
It's a shame you can't just get a new top section for it.
Anyone here used fasttech.
- Thread starter trouble1000
- Start date
- th_trl_thread_readers 0
- Status
Does sound painful mate, having a damaged private
It's a shame you can't just get a new top section for it.
I am not sure which Vivi Novas I had back then, real or knockoffs... hated them though... loaded juice, leaked right out onto the table... tossed them right in the trash. Davides I have heard about as well, going to check them all out in my search for a good stealth topper for the MVP.
I see another vendor is selling the MVPs low: Innokin iTaste MVP with dual iClear 16 Kit - Silver - Vices Electronic Cigarettes
Fasttech has some competition... They may be in trouble with this shipping mess and stores dropping prices.
I see another vendor is selling the MVPs low: Innokin iTaste MVP with dual iClear 16 Kit - Silver - Vices Electronic Cigarettes
Fasttech has some competition... They may be in trouble with this shipping mess and stores dropping prices.
Anyway, it's bedtime for me again, got a 5am start tomorrow.
Night all
Night mate see ya tomorrow.
i Never got on with them either,
Gurgling, leaking, keep having to take them apart to blow them through; one was a knock off which leaked like mad, the other was genuine and the draw was really tight on that one.
Fasttech will get all they deserve if they don`t get their act together soon ! It has been 12 days since my order shipped (still no tracking)
Well more bad luck for me todayI had to fit a new light fitting in the bathroom today, Had all my tools alongside my private v2 on the landing window cill.
I got down from the stepladder to get a little screwdriver, Knocked over the mod; which fell onto the floor. So i picked it up and had a vape no problem. continued what i was doing, It was only when i had packed up and went downstairs that i noticed the mod was rattling.
So i tightened everything down thinking it had just come loose cos of the knock it had taken, And noticed my V5 was loose, tried to tighten it and...nothing. Threads are shot on the private, bleeding gutted.
Terry, that's rotten luck.
Hope you have a better day tomorrow.
hey pipe o how you doing ?
I just take it in my stride mate, what can you do LOL. I have got my back up`s to keep me going so no big deal, Over the last couple of months i have had 3 tubes mess up on me, all because of the threads. just wear and tear and a bit of clumsiness chucked in.
Well more bad luck for me today
I got down from the stepladder to get a little screwdriver, Knocked over the mod; which fell onto the floor. So i picked it up and had a vape no problem. continued what i was doing, It was only when i had packed up and went downstairs that i noticed the mod was rattling.
So i tightened everything down thinking it had just come loose cos of the knock it had taken, And noticed my V5 was loose, tried to tighten it and...nothing. Threads are shot on the private, bleeding gutted.
Sorry for your loss, really sucks.
When I am working on something I just use the cheap throw aways. The White Cloud fling mini's aren't bad, not great, but not bad. But I don't worry about breaking anything or getting it greasy or anything. Gives me a little nic, then just throw away, then get something better when I finish what I am doing. Just a thought....
Again Sorry for your loss
Vape On
Sorry for your loss, really sucks.
When I am working on something I just use the cheap throw aways. The White Cloud fling mini's aren't bad, not great, but not bad. But I don't worry about breaking anything or getting it greasy or anything. Gives me a little nic, then just throw away, then get something better when I finish what I am doing. Just a thought....
Again Sorry for your loss
Vape On
Thanks burnie,
At least one good thing will come out of my recent losses... I will have to buy some more blingy stuff LOL
I ordered from Fasttech on the 23rd of this month, found the same product at vaportek for about a dollar more, ordered it on the 28th and it arrived at my door about 5 hours ago. Same thing with Vapor Beast, ordered a hybrid for the Mrs. on the same day and hers arrived today also. Obviously no signs of my fasttech order in that nearly 8 day span.
That's no bad thing. The essence of a healthy market is competition.
Last edited:
My order from the 12th should be here soon. I havent had chance to check as I've not been able to get on my laptop for a while, but it's now updated the tracking to left HK on the 29th. Hopefully this means i can start seeing what the pre made coils will work on and having a play with the trident clone early next week
My order from the 12th should be here soon. I havent had chance to check as I've not been able to get on my laptop for a while, but it's now updated the tracking to left HK on the 29th. Hopefully this means i can start seeing what the pre made coils will work on and having a play with the trident clone early next week
Good to see you back Cody, how's the back now ??
Any problems with the trident, I'm sure Terry can help out, he's a fountain of wisdom on the trident
Good to see you back Cody, how's the back now ??
Any problems with the trident, I'm sure Terry can help out, he's a fountain of wisdom on the trident
Cheers Ian
my back is always a problem, just less of one now than it has been over the past couple of weeks!How was your holiday?
Good to see you back Cody, how's the back now ??
Any problems with the trident, I'm sure Terry can help out, he's a fountain of wisdom on the trident
Dead easy the trident,
I don`t think you will have any problems with it cody. welcome back as well mate.
Cheers Terry
I havent spent a dime on any vape gear in the last 2 weeks or so, strangely it's about the same amount of time that i havent been on here. Perhaps there is some correlation
Seriously though, i am looking to cut down on my spending a lot until new year now - I just dont need to get much more at the moment, although i would like the big boaby carto tank and a hypertank plus a few flavours from trip hammer, alchemists cupboard and vapology. I think I will get the hypertank and about £50 of juice at the end of the month, then in December get the big boaby and that should be it!
Fasttech is doing my head in.
First, the batteries (yes/no, maybe if we wrap them in disguise). Then the holidays...
Now, the liquid, and today - 15 day delays.
I have been sat of a basket now for 3 weeks.....just can't pull the trigger.
First, the batteries (yes/no, maybe if we wrap them in disguise). Then the holidays...
Now, the liquid, and today - 15 day delays.
I have been sat of a basket now for 3 weeks.....just can't pull the trigger.
There was a message on the site saying all non-USA packages were NOT going through Hong Kong in order to avoid issues. You may be a lot safer than you imagine =] I've got 5 stuck and 1 verified as being returned to Fasttech because of the MVP2 internal battery... I have no idea if I'll get any of it out of Hong Kong.
Cheers Terry
I havent spent a dime on any vape gear in the last 2 weeks or so, strangely it's about the same amount of time that i havent been on here. Perhaps there is some correlation
Seriously though, i am looking to cut down on my spending a lot until new year now - I just dont need to get much more at the moment, although i would like the big boaby carto tank and a hypertank plus a few flavours from trip hammer, alchemists cupboard and vapology. I think I will get the hypertank and about £50 of juice at the end of the month, then in December get the big boaby and that should be it!
I am pretty much the same cody,
When i get my two rba`s i should be set up for a very long time, Although i may get a couple more mods to replace my broken ones.
This is what they are saying about tracking not working.
#1.
posted 2 days ago
by you
hi it has been 10 days since this item was shipped, and the tracking still does not work !!!
#2.
posted 1 day ago
by Staff
Sorry about the delay.
Because of the recent strict inspection on the packages that shipped via Hong Kong Post, most of the packages are stuck at Hong Kong Post and waiting to be processed. Due to the heavy workload of HK post, the scanning process is subjected to delay.Tracking service is also affected in this case.
We apologize for the inconvenience caused.
Please give it another few days to update, if it still doesn't have any information, please contact us back and we will follow up on it for you
#1.
posted 2 days ago
by you
hi it has been 10 days since this item was shipped, and the tracking still does not work !!!
#2.
posted 1 day ago
by Staff
Sorry about the delay.
Because of the recent strict inspection on the packages that shipped via Hong Kong Post, most of the packages are stuck at Hong Kong Post and waiting to be processed. Due to the heavy workload of HK post, the scanning process is subjected to delay.Tracking service is also affected in this case.
We apologize for the inconvenience caused.
Please give it another few days to update, if it still doesn't have any information, please contact us back and we will follow up on it for you
Last edited:
- Status
Similar threads
- Locked
