Anyone here used fasttech.

[lisancentraltx]

It will probably be a clone mate,

Good find though cos i have been thinking about getting one of these. I think lisa has the kick, so she will give you better info.

I bought my kicks directly from the Shenzhen sigelei Technology Company for $10 each. They work well, the FT one looks exactly like mine... even has the copper nodule on the side. The copper 'nodule' is actually a spring loaded button thingy that you push in with your thumb nail to fit the tighter mods =]

 

[terry w]

I bought my kicks directly from the Shenzhen sigelei Technology Company for $10 each. They work well, the FT one looks exactly like mine... even has the copper nodule on the side. The copper 'nodule' is actually a spring loaded button thingy that you push in with your thumb nail to fit the tighter mods =]

How do you set the wattage lisa ? do you just use a flat head screwdriver ? I know absolutely nothing about the kick.

 

[lisancentraltx]

How do you set the wattage lisa ? do you just use a flat head screwdriver ? I know absolutely nothing about the kick.

There is a little plastic screwhead on the top and you use a flathead screwdriver to turn it =] TBH I don't even KNOW what I turned mine to BECAUSE I could never read it LOL Now I've got some magnifying glasses and the coil stand with the magnification lens, so I should check it out again!

versus

Working Parameter:
1.1 Matching with atomizer in a resistance of 1.5Ώ-3.0Ώ.
1.2 Variable power from 5W-10W in 1W increment or decrement.
1.3 Match with any kind of SIGELEI Telescope.

Function
2.1 POR: After power on resort, the KICK will get into the alert status if an atomizer is not installed.

2.2 Under voltage protection: when the working voltage is below 3.2V, the KICK will protect the ecigarette from working.

Instruction:
Adjust the power by rotating the VR swither: the left-most is 5W, and the right-most is 10W.
(The kick has low impedance protection: when the resistance is below 1.0Ώ, it will not work. Short circuit protection. )

Note: Please take out the kick when charging the battery.

 

[terry w]

There is a little plastic screwhead on the top and you use a flathead screwdriver to turn it =] TBH I don't even KNOW what I turned mine to BECAUSE I could never read it LOL Now I've got some magnifying glasses and the coil stand with the magnification lens, so I should check it out again!

versus

Working Parameter:
1.1 Matching with atomizer in a resistance of 1.5Ώ-3.0Ώ.
1.2 Variable power from 5W-10W in 1W increment or decrement.
1.3 Match with any kind of SIGELEI Telescope.

Function
2.1 POR: After power on resort, the KICK will get into the alert status if an atomizer is not installed.

2.2 Under voltage protection: when the working voltage is below 3.2V, the KICK will protect the ecigarette from working.

Instruction:
Adjust the power by rotating the VR swither: the left-most is 5W, and the right-most is 10W.
(The kick has low impedance protection: when the resistance is below 1.0Ώ, it will not work. Short circuit protection. )

Note: Please take out the kick when charging the battery.

LOL i am the same with my eyes, you should take another look though, because maybe you are missing out on an even better vape They do look identical don`t they !

 

[BG101]

Another thing added to my wishlist.

Should have some reviews too buy the time I order my first Mod early next year.

 

[terry w]

Another thing added to my wishlist.

Should have some reviews too buy the time I order my first Mod early next year.

Yeah i think i will add a couple to my wish list as well,

I just had a quick look on you tube, and there is some info on there on how to use it.

 

[BG101]

Whats the recommended chargers to use?

 

[terry w]

well i got sick and tired of waiting for the kayfun to be shipped, so i have cancelled and gone for the chi you instead, alongside the kick; and a ss curved drip tip.

At least these three things ship the next day.

 

[lisancentraltx]

well i got sick and tired of waiting for the kayfun to be shipped, so i have cancelled and gone for the chi you instead, alongside the kick; and a ss curved drip tip.

At least these three things ship the next day.

I do not remember there being so many items waiting to be shipped before. Are they waiting for stock to come to Fasttech warehouse after they ordered a massive amount? Or are they waiting for the item to be MADE in a factory and they get pieces as you pay for them? I'm a bit confused about the entire mess now.

They are saying it's a FastTech PREORDER in other forums.

http://www.meshweaver.com/temp/vaping/SVOEMESTO_KAYFUN_v3.1ES_USER_MANUAL.pdf

 

[terry w]

I do not remember there being so many items waiting to be shipped before. Are they waiting for stock to come to Fasttech warehouse after they ordered a massive amount? Or are they waiting for the item to be MADE in a factory and they get pieces as you pay for them? I'm a bit confused about the entire mess now.

They are saying it's a FastTech PREORDER in other forums.

http://www.meshweaver.com/temp/vaping/SVOEMESTO_KAYFUN_v3.1ES_USER_MANUAL.pdf

Yes i think every one is getting a bit frustrated now lisa,

I have got the rocket in transit now (Another kayfun clone) so i will wait until that arrives, and see how it performs before i make another decision on the kayfun 3.1.

The confusing thing is this... I ordered on the 18th and it said 12 days wait. which means it should have shipped on the 30th, yet it states it will not be shipped until the 5th ??????????

 

[lisancentraltx]

That's why I wonder if they are waiting for a production order or if they are waiting for a shipment of items they already ordered.

TBH, I think my broken Protanks came directly from the manufacturer because they were not even wrapped. Just a flimsy box in a bag. FT does not usually do that, they usually wrap the heyho out of their shipments.

 

[terry w]

Whats the recommended chargers to use?

I can`t really help you with that one mate,

I just use the ones which i got with my lava tube, and vamo kits. Someone will chip in soon though.

 

[terry w]

That's why I wonder if they are waiting for a production order or if they are waiting for a shipment of items they already ordered.

TBH, I think my broken Protanks came directly from the manufacturer because they were not even wrapped. Just a flimsy box in a bag. FT does not usually do that, they usually wrap the heyho out of their shipments.

Yes it does take a bit of heave ho to open their packages doesn`t it lol,

But once i get a new mod and the rocket i should be good for a while anyway. how did you get on with your broken items lisa ? have they been replaced yet ?

EDIT: I think Ian must have fallen asleep in the bath

 

[lisancentraltx]

Yes it does take a bit of heave ho to open their packages doesn`t it lol,

But once i get a new mod and the rocket i should be good for a while anyway. how did you get on with your broken items lisa ? have they been replaced yet ?

EDIT: I think Ian must have fallen asleep in the bath

I have the replacement tanks waiting to ship... I am kind of wishing FT would charge $15.00 for 2 day DHL shipping like HC does :/ Really missing HC now that I have 5 packages in limbo or waiting, waiting, waiting for this ship by date of 11/05 or 11/08 or 11/15...

 

[terry w]

I have the replacement tanks waiting to ship... I am kind of wishing FT would charge $15.00 for 2 day DHL shipping like HC does :/ Really missing HC now that I have 5 packages in limbo or waiting, waiting, waiting for this ship by date of 11/05 or 11/08 or 11/15...

Gawd it really is annoying isn`t it, I have no patience to start with, let alone getting messed about with crappy postage times.

 

[lisancentraltx]

I couldn't get the braided cotton into the 2mm Ekowool, so I pushed BOTH of them, side by side, inside of one of my coils and then I pushed both down the atty hole into the juice with the needle nosed tip of a juice bottle. Well, on the AGA T2 @ 1.7oHm with 5Volts on the eVic... it is a sweet vape TH is killer, so I vape like I am smoking a cigar LOL I'm glad that I am finally working with this AGA T2 - thanks for pushing Cody & I to make our own coils <3

 

[BG101]

well i got sick and tired of waiting for the kayfun to be shipped, so i have cancelled and gone for the chi you instead, alongside the kick; and a ss curved drip tip.

At least these three things ship the next day.

Nooooooooooooooooooooooooooooooo!!!!!!!!!

I was excited to find out what you thought of it because thats also on my wishlist.

 

[terry w]

Nooooooooooooooooooooooooooooooo!!!!!!!!!

I was excited to find out what you thought of it because thats also on my wishlist.

Hey bg don`t panic LOL,

I have the rocket in transit which is also a kayfun clone, cheaper as well; so i will report on that as soon as i get hold of it.

In other news i have just seen that they will be sending my next order using singapore post, which is some good news coming out of fasttech.

 

[terry w]

I couldn't get the braided cotton into the 2mm Ekowool, so I pushed BOTH of them, side by side, inside of one of my coils and then I pushed both down the atty hole into the juice with the needle nosed tip of a juice bottle. Well, on the AGA T2 @ 1.7oHm with 5Volts on the eVic... it is a sweet vape TH is killer, so I vape like I am smoking a cigar LOL I'm glad that I am finally working with this AGA T2 - thanks for pushing Cody & I to make our own coils <3

Practice makes perfect lisa,

You will just get better and better now. I personally don`t thing there is a better vape on anything, but a home made wick and coil.

 

[snout71]

today i received 2 shipments from fasttech and 2 from focalecig

the 2 from fasttech ordered 2 October so 4 weeks delivery time