Rest easy all =] I'm about half done with my shift... I've got another 10 hours before I sleep :/
Anyone here used fasttech.
- Thread starter trouble1000
- Start date
- th_trl_thread_readers 0
- Status
This is a good place for wick and wire claire...http://www.vape-atomizer-mesh.com/products/Ribbon-Wire.html
I agree... Terry put me onto these too and the starter pack is excellent.
cody,
I hope Ian doesn`t see that post, He will be moving in with you.
Bathing my son is one thing, but bathing ian
WEll, im off to bed myself soon so goodnight to terry, ian, claire, lisa and anyone else i have neglected to mention!
I am off to bed now guys and girls, catch you tomorrow, na night
g`night claire,
don`t be dreaming about nice gold shiney things now.
I agree... Terry put me onto these too and the starter pack is excellent.
Bathing my son is one thing, but bathing ian
I love it mate.
Correct me if I'm wrong:
Special Bundle A - Various Mesh, Wire and Wick Products - Ideal For Beginners
Price: £10.00 (16.08 USD) (Including VAT at 20%)
Quantity: 1
Special Bundle A consists of the following products:
- #400 x 0.025mm TWILL SS316 Mesh - 150mm x 250mm
- 2mm Ekowool - 1 Metre
- 3mm Ekowool - 1 Metre
- 2mm Silica - 1 Metre
- 3mm Silica - 1 Metre
- 0.4mm x 0.1mm Kanthal A1 Ribbon Wire - 10 Metres
- 0.2mm Kanthal A1 Wire - 10 Metres
- 0.18mm Pure Nickel Non-Resistance Wire - 10 Metres
Are you telling me that ALL OF THIS is $16USD?!?!?!?!??!?!?! I've been a fool :'( This is a magnificent deal!!!
Note to myself: http://www.vape-atomizer-mesh.com/p...Wick-Products---Ideal-For-Beginners-2492.html
Special Bundle A - Various Mesh, Wire and Wick Products - Ideal For Beginners
Price: £10.00 (16.08 USD) (Including VAT at 20%)
Quantity: 1
Special Bundle A consists of the following products:
- #400 x 0.025mm TWILL SS316 Mesh - 150mm x 250mm
- 2mm Ekowool - 1 Metre
- 3mm Ekowool - 1 Metre
- 2mm Silica - 1 Metre
- 3mm Silica - 1 Metre
- 0.4mm x 0.1mm Kanthal A1 Ribbon Wire - 10 Metres
- 0.2mm Kanthal A1 Wire - 10 Metres
- 0.18mm Pure Nickel Non-Resistance Wire - 10 Metres
Are you telling me that ALL OF THIS is $16USD?!?!?!?!??!?!?! I've been a fool :'( This is a magnificent deal!!!
Note to myself: http://www.vape-atomizer-mesh.com/p...Wick-Products---Ideal-For-Beginners-2492.html
Well it's time for bed for me again. 5 am start again tomorrow
See you all later and remember bathing is
g`night mate.
Yes it is correct lisa,
he is very reasonable with his prices, I was talking to jimi d from your side a while back and sent him the link. he had already used him before LOL.
If you find any special tricks when you get a chance to play with it, I'd appreciate some feedback. As long as it's easier to do than the ithaka, I really don't mind though.
Enjoy your shower mate
Sure, but I'm a N00B at rba's, but will share anything I learn.
Was going to post pictures, but Ian's link is great. That's what I am worried about is working in a hole to put in the wick. Before I wrap one I am going to try one of the 50 pack I got from FT, if I screw it up no big loss as little as they cost. I got the 2 ohm ones.
That does look like a good deal, but I didn't check the shipping to US, but bookmarked it.
Vape On
Well I couldn't stand it. Took a pre-made coil from FT and put it in, reads 2.1 ohms. Was not that hard, took less than 10 min to get it installed, little PITA, but not too bad. Hits like a bear. I am used to EVOD's or CE4's and this is lots more TH than them. But does look funny on my VV V3. Is surprising how much more hit I get with the same ohms, and running at 3.3 volts. I may have to up the flavor on my juice as it seems to not taste as good, could be just the new coil, which I torched and dry burned, but time will tell.
Now I got to get something to fit the tank, but I don't like bigger mods, and I was not going to buy anything more until the first of the year.
Vape On
Now I got to get something to fit the tank, but I don't like bigger mods, and I was not going to buy anything more until the first of the year.
Vape On
Well I couldn't stand it. Took a pre-made coil from FT and put it in, reads 2.1 ohms. Was not that hard, took less than 10 min to get it installed, little PITA, but not too bad. Hits like a bear. I am used to EVOD's or CE4's and this is lots more TH than them. But does look funny on my VV V3. Is surprising how much more hit I get with the same ohms, and running at 3.3 volts. I may have to up the flavor on my juice as it seems to not taste as good, could be just the new coil, which I torched and dry burned, but time will tell.
View attachment 270640
Now I got to get something to fit the tank, but I don't like bigger mods, and I was not going to buy anything more until the first of the year.
Vape On
That Itaste is VV, like a 3.3-5V Variable voltage function. Probably going to be like a Twist with a 3.2-4.8V Variable voltage function. Don't adjust the juice, just use a higher Volt or Watt mod. My eGo Twist doesn't knock the socks off of most RBAs - the RBAs need a better mod. Kicked mech or VV/VW much higher, eVic, MPV2, or kicked mech.
Morning all!
hope your getting some zzz soon Lisa.
Just had a look, they're soooo much cheaper than where I've been buying from! Thanks Terry!
First thing on my mind as I got out of bed was - ooh, I'll have a mech soon and an Aga T2
No need for stalking FT tracking now lol!
hope your getting some zzz soon Lisa.Just had a look, they're soooo much cheaper than where I've been buying from! Thanks Terry!
g`night claire,
don`t be dreaming about nice gold shiney things now.
First thing on my mind as I got out of bed was - ooh, I'll have a mech soon and an Aga T2
No need for stalking FT tracking now lol!
Morning all!
Just had a look, they're soooo much cheaper than where I've been buying from! Thanks Terry!
First thing on my mind as I got out of bed was - ooh, I'll have a mech soon and an Aga T2
No need for stalking FT tracking now lol!
It is on it`s way as i type claire.
Just one more thing claire, don`t tell ian what we are talking about.
It is on it`s way as i type claire.
Haha! Thanks Terry - my lips are sealed
Just had a little looky on status of my FT orders - TVS left Singapore post yesterday, woop!
Rocket kayfun clone and V12 dripper due for leaving FT on Monday - should have them by Christmas and with my Aga T2 due tomoz or Mon and that secret me and Terry's got that I can't tell Ian about! I should be well occupied tinkering for a while
Rocket kayfun clone and V12 dripper due for leaving FT on Monday - should have them by Christmas and with my Aga T2 due tomoz or Mon and that secret me and Terry's got that I can't tell Ian about! I should be well occupied tinkering for a while
Haha! Thanks Terry - my lips are sealed
LOL yes lets see how he likes it,
He had us all guessing one of his secrets a few weeks ago giving us cryptic clues etc, but no clues from me.
Just had a little looky on status of my FT orders - TVS left Singapore post yesterday, woop!
Rocket kayfun clone and V12 dripper due for leaving FT on Monday - should have them by Christmas and with my Aga T2 due tomoz or Mon and that secret me and Terry's got that I can't tell Ian about! I should be well occupied tinkering for a while
Well lucky you Claire,
Absolutely no movement on my two orders ! I am sure you will love having some mech`s in you arsenal.
Last edited:
- Status
Similar threads
- Locked
