• This forum has been archived

    If you'd like to post a thread, post it here instead!

    View Forum

Anyone here used fasttech.

Status
Not open for further replies.

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
The Mini KF is quite a nice little mod, might get another myself, although I doubt I will ever use the extra tank piece and longer chimney to make it up to 3ml

I love it bob, a little cracker, and like you i don`t think the longer pieces are really necessary.



Yes it is worrying, anyone know his surname, could maybe ring the Ossi, not that they would probably be able to tell us anything.
95% of my Mechs are sitting in an Acrylic stand at the back of my desk under the bottom shelf, I only have 3 on the go, and a few others that get occasional use.
Bob if you want me to pm you his surname just let me know !
 

Pictor

Vaping Master
ECF Veteran
Verified Member
Jun 27, 2009
9,066
19,246
UK
You sound just like my Wife :laugh:
What? ...the boring F1 thing - they're only a lot of noisy cars chasing each other around and hopefully passing a few without smashing them up ...my Dad thought it boring too! :laugh: ...and like football, they get paid too much as well!

So, will you be placing an order with FT anytime soon ??
Dunno ...perhaps :rolleyes:

It's a great tank. (with BVC of course). Needle bottles are better than nasty fat nozzle bottles.

The colour is nice enough, even for a bloke.
Well you can count me in with that group on this ...I don't 'do' pink! :laugh: ...and yes, BVC of course! ;)

Well my IPV 2 and I-stick were dispatched today, and seeing as they use DHL instead of royal snail, hopefully i will have them tomorrow. :) wicked and filled a kayfun earlier with the chefs doughnut, and will be trying it shortly. :toast:
Yay! New toys :2cool:

I'm getting a bit worried now that Tom or Ron hasn't been around for a while :(
Does seem odd seeing they'd both been in touch on here. Do hope he's OK.

Should have them tomorrow. :D
Nice :thumb:
 

StarreLabelle

Super Member
ECF Veteran
Sep 18, 2014
750
2,405
Texas, Near Randolph Air Force Base
Just wondering if anyone in the UK forum has used fasttech.com

The reason for asking is, I've been looking at the prices for their Vamo and it seems a lot cheaper than most UK vendors. Not really worried about the quality, but the chance of having to pay extra for import duty and vat etc.
I know RM generally charge a handling fee. My last order from USA incurred a vat and handling fee, ended up paying an extra £23 for my Vmod - but all the UK vendors were out of stock.

So anyone have any experience ordering from fasttech and did you have to pay any extras to get your kit ???
I'm hearing tons of complaints about very slow shipping and poor customer service.

Sent from my Samsung Galaxy Tab 3 via Tapatalk
 

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
Mine do - I think you need to opt for immediate notification via email in your account settings - will depend if he did that.

Ah right, obviously i didn`t take that option. Maybe bob will phone the hospital, as it is a bit worrying. On to the doughnut now trish, i have been trying it in a kayfun with a 1.6 ohm coil !

Now is it just me or do you and bob find the custard not unlike GVC ? It is very nice indeed, but all i seem to get ( for now ) is the custard. Maybe when i have vaped a few ml in the clean tank, more flavours will come through ! Just had a thought, i will put it on the MVP and have a proper blast right now :laugh:

Well nicole shirtlifter is back :laugh: Miles and miles better, and tons more flavour. Started @ 6w and ended up going to 11w. What a massive difference the extra power makes. :D
 
Last edited:

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
I'm hearing tons of complaints about very slow shipping and poor customer service.

Sent from my Samsung Galaxy Tab 3 via Tapatalk

Yes we have all been there with the shipping starre :laugh: They don`t seem to be so bad these days, and shipping via singapore post usually takes between 7 14 days to the uk.
 

Pictor

Vaping Master
ECF Veteran
Verified Member
Jun 27, 2009
9,066
19,246
UK
Ah right, obviously i didn`t take that option. Maybe bob will phone the hospital, as it is a bit worrying.
Unless it's simply a case of saying he was discharged, I doubt they'll tell anyone not a relative anything.

On to the doughnut now trish, i have been trying it in a kayfun with a 1.6 ohm coil !

Now is it just me or do you and bob find the custard not unlike GVC ? It is very nice indeed, but all i seem to get ( for now ) is the custard. Maybe when i have vaped a few ml in the clean tank, more flavours will come through ! Just had a thought, i will put it on the MVP and have a proper blast right now :laugh:

Well nicole shirtlifter is back :laugh: Miles and miles better, and tons more flavour. Started @ 6w and ended up going to 11w. What a massive difference the extra power makes. :D
Hah! I'm using it with a MOW 1.8coil on an iStick at 6.5W. ...probably more like 7.5W if on an MVP. ...just tried it at 8W....then 10W - lost some of the custard so have gone back and can taste a custard doughnut! :)
It's a nice rich custard too!

So ...you like it? :laugh:

I'm almost half way down the 50ml bottle, so will order another soon to let it steep ;)
I'll probably get some more LCCC too.

I'm wondering about the QOP ..I had no problem with the 10ml bottle I had first, but got bad breathing problems when I started using the 30ml. Wondering if I should try another small bottle just to see.
 

Bobw1951

Vaping Master
ECF Veteran
Verified Member
Feb 23, 2014
6,890
9,913
London, UK

Pictor

Vaping Master
ECF Veteran
Verified Member
Jun 27, 2009
9,066
19,246
UK
I'm hearing tons of complaints about very slow shipping and poor customer service.

Sent from my Samsung Galaxy Tab 3 via Tapatalk
I've only had one order in recent weeks and that was no problem - can't say I've seen anyone else here say they had any problems recently either.

If it was batteries the complaints were about, they do sometimes have problems with shipping regulations for airmail, and they can be very slow when sent surface.
 

Bobw1951

Vaping Master
ECF Veteran
Verified Member
Feb 23, 2014
6,890
9,913
London, UK
Ah right, obviously i didn`t take that option. Maybe bob will phone the hospital, as it is a bit worrying. On to the doughnut now trish, i have been trying it in a kayfun with a 1.6 ohm coil !

Now is it just me or do you and bob find the custard not unlike GVC ? It is very nice indeed, but all i seem to get ( for now ) is the custard. Maybe when i have vaped a few ml in the clean tank, more flavours will come through ! Just had a thought, i will put it on the MVP and have a proper blast right now :laugh:

Well nicole shirtlifter is back :laugh: Miles and miles better, and tons more flavour. Started @ 6w and ended up going to 11w. What a massive difference the extra power makes. :D

Well would you adam and eve it, my KFL+ with the do'nut in is also 1.6 ohm, but I have mine on the Provari P3 Beta @ 10w, in fact 10w appears to be my normal vaping wattage for most things these days, some juices have to go + or - though, and of course I have a few mods that are vv only so have to adjust those accordingly.
 

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
Unless it's simply a case of saying he was discharged, I doubt they'll tell anyone not a relative anything.

Hah! I'm using it with a MOW 1.8coil on an iStick at 6.5W. ...probably more like 7.5W if on an MVP. ...just tried it at 8W....then 10W - lost some of the custard so have gone back and can taste a custard doughnut! :)
It's a nice rich custard too!

So ...you like it? :laugh:

I'm almost half way down the 50ml bottle, so will order another soon to let it steep ;)
I'll probably get some more LCCC too.

I'm wondering about the QOP ..I had no problem with the 10ml bottle I had first, but got bad breathing problems when I started using the 30ml. Wondering if I should try another small bottle just to see.

Yes it is very nice trish, regarding the QOP, you could do as bob said and just put a bit of it with the doughnut. :)
 

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
Well would you adam and eve it, my KFL+ with the do'nut in is also 1.6 ohm, but I have mine on the Provari P3 Beta @ 10w, in fact 10w appears to be my normal vaping wattage for most things these days, some juices have to go + or - though, and of course I have a few mods that are vv only so have to adjust those accordingly.

Ha yes bob, great minds and all that :toast: This is one of the reasons i am falling out with mechs bob, because there is no room for any adjustments, with the exception of doing a new build.
 

Pictor

Vaping Master
ECF Veteran
Verified Member
Jun 27, 2009
9,066
19,246
UK
Yes it is very nice trish, regarding the QOP, you could do as bob said and just put a bit of it with the doughnut. :)
Yes, I could do that ..what I mean is, could the 30ml bottle have had PG in it accidentally ..I know intolerance can sometimes take a while to build, but I had no problems with the 10ml bottle. May be worth trying.
 

Bobw1951

Vaping Master
ECF Veteran
Verified Member
Feb 23, 2014
6,890
9,913
London, UK
Unless it's simply a case of saying he was discharged, I doubt they'll tell anyone not a relative anything.

Hoping they might be able to say whether he is still there or discharged, if the latter he might be in Jersey recuperating and not bothering with anything else, although you would think he would have told us, if that's the case. I know they won't be able to tell us anything about his condition, but if he is still there they might be able to let me talk to the ward and perhaps leave a message for his brother Tom to get in touch when he visits.
 

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
Yes, I could do that ..what I mean is, could the 30ml bottle have had PG in it accidentally ..I know intolerance can sometimes take a while to build, but I had no problems with the 10ml bottle. May be worth trying.

Yes i would certainly try another 10 ml trish to see if there is a difference. If you find that you are okay with the new 10 ml, you can always just work away what you have left of the 30 ml, Like in the doughnut. :)
 
Status
Not open for further replies.

Users who are viewing this thread