• This forum has been archived

    If you'd like to post a thread, post it here instead!

    View Forum

Anyone here used fasttech.

Status
Not open for further replies.

Brynglas

Vaping Master
ECF Veteran
Verified Member
Sep 22, 2014
4,561
6,449
ΩFlint MountainΩ
Where have you ordered your wire from ?


I haven't yet terry,nor have i ordered the mod for it to go on.
No panic 'cos i fancy a VS and they aren't speeding their way to the UK in a hurry by the looks of it.
Trouble with this game aswell,something new will be announced next week.
Oh! and there's bish's mods aswell,can't make my bloody mind up.
 

Pictor

Vaping Master
ECF Veteran
Verified Member
Jun 27, 2009
9,066
19,246
UK
Aw thanks trish, you are so sweet :) I`ve ordered now though, so you enjoy it. :D
That's OK - anytime you think I have something you want to try, I'll send you some as long as you don't mind VG! :) My last order of Posset was 0.3mg and I got 100ml, but I still have some 0.6 left.

How's that Hana Trish?
I think it's safe to say Dead! :( Fed up with it and don't want a replacement!

I like the colour and size of it but it's an underperformer compared to other stuff I have. I saw a no-nonsense UK video review at POTV today and if I'd seen it earlier wouldn't have got it. (It still didn't mention turning it on though! - let's face it why should consumers have to go looking for answers with electrical items!) Apparently the build is far from great, and the battery life is poor.

I opened a ticket at FT.
Wonder if the Cloupor one is any better - or perhaps I'll wait until someone else does a red one.

I just put my rocket with chefs lemon cc cake on my i-stick. 1.5 ohm coil and the juice is 12 mg. Yummy tummy :laugh: Miles better than the 18 mg apple strudel @ higher watts. So i will definitely not be getting any more 18 mg, no way jose` :D
Nice! Did you see that SNG one I mentioned: Apple Coffee Cake ? :)
I've ordered some MB flavouring in Whipped Cream and Pie Crust! Something like those can even be added to a tank by a drop or two! I can already think of a couple I have that would likely benefit.
 

Bobw1951

Vaping Master
ECF Veteran
Verified Member
Feb 23, 2014
6,890
9,913
London, UK
I haven't yet terry,nor have i ordered the mod for it to go on.
No panic 'cos i fancy a VS and they aren't speeding their way to the UK in a hurry by the looks of it.
Trouble with this game aswell,something new will be announced next week.
Oh! and there's bish's mods aswell,can't make my bloody mind up.

I see there was one in the classies yesterday (bish mod that is), I've got a blue dual parallel 18650 sx350 of his.
 
Last edited:

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
That's OK - anytime you think I have something you want to try, I'll send you some as long as you don't mind VG! :) My last order of Posset was 0.3mg and I got 100ml, but I still have some 0.6 left.

Nice! Did you see that SNG one I mentioned: Apple Coffee Cake ? :)
I've ordered some MB flavouring in Whipped Cream and Pie Crust! Something like those can even be added to a tank by a drop or two! I can already think of a couple I have that would likely benefit.

Thanks Trish :) I haven`t looked at the SNG ones yet, but i did see a couple of MB liquids there what i haven`t even seen on their own site. :laugh: Oh and the lemon bar is there as well trish !
 

trouble1000

PV Master of Valinor
ECF Veteran
Verified Member
Mar 22, 2013
5,583
8,669
Rochdale, Lancs, GB
www.puffin-eliquid.com
No, this is the Hana clone we are now talking about, and IAN don't forget that this is the LiPo battery version, and depending on the LiPo used might it be hot wired in,

Trisha, the red light should go out when it is fully charged.

EDIT: Disregard that bit I crossed out, was something else entirely, must learn to read the comments before making mine :laugh:

I missed the lipo bit Bob :facepalm: Age is catching up with me :laugh:

I just use a straightened out paper-clip, just wiggle it around the pin and lever it lightly, some attys have longer pins/threads so push the pins down on the mods, have you never had that problem before? it's why you see people moaning these days about mods/attys not having spring loaded 510 connectors.

The number of times I've had to do that for the vapers at work. Seems to be a regular occurrence with the small ego type batteries. I'll have to start charging them for my 510 connection wizardry :laugh:

:laugh: Must admit got a bit confused when I first read that Bob haha.

I dug out my quasar clone having watched rip trippers recent review of it and while it is still a bit leaky and the o rings aren't perfect I am getting a nice tasty warm vape from it.

Simple 0.6 ohm single coil but I've got the airflow in dual coil mode to provide some extra air. I do that on my magma rda sometimes as well.

If you're getting a bit of leakage from the o-rings on the base Adam, try wrapping a bi of PTFE tape over the o-rings mate :)

My first thought was OK, so is the government still going to try and diminish it? ...I suppose they'll do what they darn well want to as usual though :rolleyes:

I did take the back off, and on the left there's the battery pack (in a sort of silver grey poly package) with the connections/wires etc. on top of them, and on the right some electronics covered with a clear red Perspex. There's a circular silver hologram sticker over another inner screw at the top right of that section, and a square one bottom right.
Nothing visibly loose and no tags to pull out either.

Nope, sorry - got the dog groomers coming at 9am, so got to get to bed earlier ...nite Ian :)

Yep politicians say one thing and then do whatever they want.

As Bob reminded me, it's a lipo battery pack so not really much that can be done with it unfortunately :(

I managed to wake myself up, so sorted there Trisha :laugh:

Going back to the build i did earlier bob...14 wraps of 30 gauge round a 2 mm bit. Twas a pain in the bum keeping them coils straight in my pliers when i was torching them :laugh: So i am thinking 8 wraps around a 3mm bit will be a bit easier for the same resistance :) What i will do in the longer term is start lowering my nic, so i can go to about 1 ohm without burning my throat to bits.

It is surprising how much easier it is to wrap a 3mm coil. That extra mm makes all the difference mate :ohmy:

What i think i will do adam is gradually start replacing my 12mg down to 6. I`m not bothered about sub ohms, so i am thinking 6 mg juice @ around 1 ohm, and i can pump the watts up. And yes indeedy i am forward thinking to the orchids, with them being dual coil. It`s just about finding the right balance mate at the end of the day.:)

Get that nic increased up to 36mg, that will put hairs on yer chest :laugh:

Yeah!It's a cobbled thing Terry,don't fancy it myself.Bit like putting a Rover V8 in a Mini.

As a matter of fact,i cleaned the fridge out:pervy:Today i'll finish up ,ceiling,walls and floor.It's all go at the sharp end.
No time for Orchids,i'm a busy fella(that should read,no i still haven't got any wick or wire)

Bloody hell George, leave some time for vaping mate :laugh:

...one in particular that sounds dreadful to me: Fried Elvis - Southern fried peanut butter and banana ...Ick!

And there was me thinking they'd actually fried Elvis, the fans would go mental :laugh:

Just placed an order for concentrates with the Chefs.

Hope they listen to my polite request to bag the bottles and tape the bag up so they don't leak in the post. The folder where I keep receipts/invoices still smells of black mamba owing to the slight concentrate leakage with my last order :laugh:

It amazes me, even when the juices are perfectly sealed up, wrapped in bubble wrap or even vacuum sealed. The moment you open the parcel you get a waft of e-liquid, smells lovely :D
 

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
I missed the lipo bit Bob :facepalm: Age is catching up with me :laugh:



The number of times I've had to do that for the vapers at work. Seems to be a regular occurrence with the small ego type batteries. I'll have to start charging them for my 510 connection wizardry :laugh:



If you're getting a bit of leakage from the o-rings on the base Adam, try wrapping a bi of PTFE tape over the o-rings mate :)



Yep politicians say one thing and then do whatever they want.

As Bob reminded me, it's a lipo battery pack so not really much that can be done with it unfortunately :(

I managed to wake myself up, so sorted there Trisha :laugh:



It is surprising how much easier it is to wrap a 3mm coil. That extra mm makes all the difference mate :ohmy:



Get that nic increased up to 36mg, that will put hairs on yer chest :laugh:



Bloody hell George, leave some time for vaping mate :laugh:



And there was me thinking they'd actually fried Elvis, the fans would go mental :laugh:



It amazes me, even when the juices are perfectly sealed up, wrapped in bubble wrap or even vacuum sealed. The moment you open the parcel you get a waft of e-liquid, smells lovely :D

Where is your hana at right now Ian ? i know it is coming over land but do you still get tracking ? Mine has been at the infomation recieved bit for the last couple of days, so hopefully twill be on the plane tomorrow !
 

trouble1000

PV Master of Valinor
ECF Veteran
Verified Member
Mar 22, 2013
5,583
8,669
Rochdale, Lancs, GB
www.puffin-eliquid.com
Where is your hana at right now Ian ? i know it is coming over land but do you still get tracking ? Mine has been at the infomation recieved bit for the last couple of days, so hopefully twill be on the plane tomorrow !

Destination - United Kingdom
The item (RC016575183HK) left Hong Kong for its destination on 12-Nov-2014.


That's where I'm at, at the moment mate. To be honest, if it arrives before Chrimbo, I'll be happy.
----------------------------------------------------------

I did get these today though in my vape mail :

https://www.fasttech.com/p/1735400
https://www.fasttech.com/p/1893601
https://www.fasttech.com/p/1880305

So I'll be having a play tomorrow, now I've got 5 days left of my holiday. Turning my mobile off now, so work can't ring me :laugh:
 

Brynglas

Vaping Master
ECF Veteran
Verified Member
Sep 22, 2014
4,561
6,449
ΩFlint MountainΩ
Interesting Terry,i won't be doing this.But single coil on an Orchid.
 

Attachments

  • 2djxw6x.jpg
    2djxw6x.jpg
    10 KB · Views: 9

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
Destination - United Kingdom
The item (RC016575183HK) left Hong Kong for its destination on 12-Nov-2014.


That's where I'm at, at the moment mate. To be honest, if it arrives before Chrimbo, I'll be happy.
----------------------------------------------------------

I did get these today though in my vape mail :

https://www.fasttech.com/p/1735400
https://www.fasttech.com/p/1893601
https://www.fasttech.com/p/1880305

So I'll be having a play tomorrow, now I've got 5 days left of my holiday. Turning my mobile off now, so work can't ring me :laugh:

So you got a bob then :laugh: What plans have you got for the dna set mate ?
 

terry w

Vaping Master
ECF Veteran
Verified Member
Sep 1, 2012
8,666
10,916
Manchester UK
Interesting Terry,i won't be doing this.But single coil on an Orchid.

I won`t myself george, but it`s nice to have options mate. :)

I can see that there could be problems with that sort of build though, as the coil is nowhere near the airholes.
 
Last edited:

trouble1000

PV Master of Valinor
ECF Veteran
Verified Member
Mar 22, 2013
5,583
8,669
Rochdale, Lancs, GB
www.puffin-eliquid.com
Interesting Terry,i won't be doing this.But single coil on an Orchid.

Not enough wick for me George, I'd be worried about dry hits :laugh: I reckon it will work well though with rayon as a wick. Looks like a large diameter coil, so plenty of surface area. Would need to be used at higher watts though I guess.

So you got a bob then :laugh: What plans have you got for the dna set mate ?

Certainly did mate, Bob's in my vape cupboard waiting for a good scrub :laugh:

Once the wooden box mod arrives from FT (the double 18650 one), I'm going to see if I can turn it into a dna30 mod mate :D The dna chip is surprisingly small, but does come in a good box with plenty of foam to protect it, very well packaged.
 
Status
Not open for further replies.

Users who are viewing this thread