Apollo E-cig contest/giveaway thread!!

Status
Not open for further replies.

KatzWh1skers

Vaping Master
ECF Veteran
Verified Member
May 3, 2015
7,239
36,509
OK, I see I have been tagged. Where am I and why am I here?
Hiya Fuzzy! Seriously ..@USMCotaku said it best.."Just a fun relaxed contest thread..... You are entered once per draw period (that's Monday after next), just by hanging out and chatting about stuff.....
They also drop teasers about new mods in here to make us drool now and then :D"
Dunno about you, but after all "that" ;);)...I need a vacation exhaustedemo.png
 

NancyB

Super Member
ECF Veteran
Verified Member
Jan 18, 2013
633
3,010
80
AZ/USA
www.davidshome.com
Fyi.... That sub tank rba...... One of the easiest build decks ever
Sent with one hand, the other is busy vaping.

ok, otaku, but this vaper needs a name or brand or picture to see what's so easy!

[Like, we had a deck along the back side of our last house, but Dad built that one, and, I guess you could say, he had help from all the neighborhood boys pounding 'polish gingerbread' into the boards - haha.]

Please refresh my memory what rba means (?rebuildable atomizer/coil?)

I've been looking for a smallish size tank with air control that isn't necessarily for sub-ohming, but up the ladder from my 'clear evods' that doesn't cost an arm and a leg (got those tied up in the current house purchase), but provides better flavor, not necessarily clouds, for this ol' gals new box mod.

What's your suggestion? or @a_rey88 or the rest of you readers..??
 

USMCotaku

ECF Guru
ECF Veteran
Apr 25, 2014
11,877
45,735
California
Hand check....
3517451add468a84fca0fd27910eb169.jpg

Just got the replacement glass for my kraken today.....rebuilt it with a dual coil Ti @ .20 ohm..... It's a pita to build.....BUT, once built, this thing is amazing! Always heard praise for Geni tanks....now I know why. Flavor is top notch, on par with drippers. I thought the airflow wouldn't be enough, and that I would have to drill it out, but nope, it's perfect fully open (closes down well for mtl vapers)....my new fav topper..... I'm behind the times :p
Sent with one hand, the other is busy vaping.
 

cooladdict

Vaping Master
ECF Veteran
Verified Member
Apr 28, 2012
7,735
49,856
58
Seahawk Nation
Here is my pups pose..... ( nutidy, observe with caution) lol

ea1e0de7737d4ee7a115b89ae5dbc39f.jpg

He finally shed all of his undercoat! It took all summer, but he finally dropped it all. It must be a husky thing the way they lay like that. I tell him it is pretty graphic now that he has shed his hair! Haha

It must be a Lab thing, too! :D
homerpose.JPG
 

redrebel821

ECF Guru
ECF Veteran
Verified Member
Jan 8, 2015
11,224
78,226
Houston area
ok, otaku, but this vaper needs a name or brand or picture to see what's so easy!

[Like, we had a deck along the back side of our last house, but Dad built that one, and, I guess you could say, he had help from all the neighborhood boys pounding 'polish gingerbread' into the boards - haha.]

Please refresh my memory what rba means (?rebuildable atomizer/coil?)

I've been looking for a smallish size tank with air control that isn't necessarily for sub-ohming, but up the ladder from my 'clear evods' that doesn't cost an arm and a leg (got those tied up in the current house purchase), but provides better flavor, not necessarily clouds, for this ol' gals new box mod.

What's your suggestion? or @a_rey88 or the rest of you readers..??
I like my Protank 2 with adjustable airflow bases....
 

USMCotaku

ECF Guru
ECF Veteran
Apr 25, 2014
11,877
45,735
California
ok, otaku, but this vaper needs a name or brand or picture to see what's so easy!

[Like, we had a deck along the back side of our last house, but Dad built that one, and, I guess you could say, he had help from all the neighborhood boys pounding 'polish gingerbread' into the boards - haha.]

Please refresh my memory what rba means (?rebuildable atomizer/coil?)

I've been looking for a smallish size tank with air control that isn't necessarily for sub-ohming, but up the ladder from my 'clear evods' that doesn't cost an arm and a leg (got those tied up in the current house purchase), but provides better flavor, not necessarily clouds, for this ol' gals new box mod.

What's your suggestion? or @a_rey88 or the rest of you readers..??
rba=rebuildable atomizer...i was talking about reds new kanger sub tank mini, it comes with pre made coils and a rebuildable section, that is really easy to work with.......
For your new mod, look at Apollo's Phazer, since we are on an Apollo thread, and it does look to be a nice tank....good reviews from those who have used it at least...... Someone on this thread mentioned really liking theirs
 

redrebel821

ECF Guru
ECF Veteran
Verified Member
Jan 8, 2015
11,224
78,226
Houston area
rba=rebuildable atomizer...i was talking about reds new kanger sub tank mini, it comes with pre made coils and a rebuildable section, that is really easy to work with.......
For your new mod, look at Apollo's Phazer, since we are on an Apollo thread, and it does look to be a nice tank....good reviews from those who have used it at least...... Someone on this thread mentioned really liking theirs
I may need to troll the store again.... I read a review of a Phazer before, but it was before I was ready for it, if ya know what I mean!
 

jseah

Vaping Master
ECF Veteran
Verified Member
Feb 16, 2015
4,112
19,429
Hudson Valley, NY, USA
Already in my cart...lol....got some .5, and some 1.2

I haven't tried the kanthal coils, but their nickel ones are a bit off with the resistance (I believe their stated resistance is pretty much with the legs cut off). The ones that I have been using is 26 gauge nickel at 12 wraps and they're "rated" as 0.1 ohms. However, because I've been using them as vertical coils and have been pretty much keeping the legs intact, they are measuring out to be around 0.14-0.15 ohms after being built.
 

NancyB

Super Member
ECF Veteran
Verified Member
Jan 18, 2013
633
3,010
80
AZ/USA
www.davidshome.com
rba=rebuildable atomizer...i was talking about reds new kanger sub tank mini, it comes with pre made coils and a rebuildable section, that is really easy to work with.......
For your new mod, look at Apollo's Phazer, since we are on an Apollo thread, and it does look to be a nice tank....good reviews from those who have used it at least...... Someone on this thread mentioned really liking theirs

ok - off to take a gander at it.. thanks!
Hubby says tis time to hit the road for dinner out and fun following. adios!
 
Last edited:

jseah

Vaping Master
ECF Veteran
Verified Member
Feb 16, 2015
4,112
19,429
Hudson Valley, NY, USA
rba=rebuildable atomizer...i was talking about reds new kanger sub tank mini, it comes with pre made coils and a rebuildable section, that is really easy to work with.......
For your new mod, look at Apollo's Phazer, since we are on an Apollo thread, and it does look to be a nice tank....good reviews from those who have used it at least...... Someone on this thread mentioned really liking theirs
I was checking out the coils, it looks interesting that they made it so it looks fairly easy to rebuild on.
 

USMCotaku

ECF Guru
ECF Veteran
Apr 25, 2014
11,877
45,735
California
:rickroll:
Got an email for shipping notification of my Apollo package.....already!
That's what I call great customer service.......a prize package shipped on the same day it was won! You just know the same level of care would be given to orders
Sent with one hand, the other is busy vaping.
 

redrebel821

ECF Guru
ECF Veteran
Verified Member
Jan 8, 2015
11,224
78,226
Houston area
I haven't tried the kanthal coils, but their nickel ones are a bit off with the resistance (I believe their stated resistance is pretty much with the legs cut off). The ones that I have been using is 26 gauge nickel at 12 wraps and they're "rated" as 0.1 ohms. However, because I've been using them as vertical coils and have been pretty much keeping the legs intact, they are measuring out to be around 0.14-0.15 ohms after being built.
I need the long legs to get into the housing part...lol...maybe I'll end up getting a pack of 5 each of the ready to drop in whole ones for now
 

redrebel821

ECF Guru
ECF Veteran
Verified Member
Jan 8, 2015
11,224
78,226
Houston area
:rickroll:
Got an email for shipping notification of my Apollo package.....already!
That's what I call great customer service.......a prize package shipped on the same day it was won! You just know the same level of care would be given to orders
Sent with one hand, the other is busy vaping.
That impresses the hell out of me!!!
 

KatzWh1skers

Vaping Master
ECF Veteran
Verified Member
May 3, 2015
7,239
36,509
:rickroll:
Got an email for shipping notification of my Apollo package.....already!
That's what I call great customer service.......a prize package shipped on the same day it was won! You just know the same level of care would be given to orders

Congratz, ma man! Well Done!!
 

cooladdict

Vaping Master
ECF Veteran
Verified Member
Apr 28, 2012
7,735
49,856
58
Seahawk Nation
Already in my cart...lol....got some .5, and some 1.2
I just got a 10-pack of premade Clapton coils (was feeling adventurous!) yesterday, so when my 2 new RDAs eventually get here I will probably be calling on @USMCotaku and @jseah to help me figger out how to get the coils loaded properly, lol! I have a pair or tiny needle-nose pliers because I am sure I will have to bend the legs, but I have never used either of these RDAs so I don't know how they are going to be to build on. I wish there was better tracking from the Netherlands, lol. They will be here someday...
 

cooladdict

Vaping Master
ECF Veteran
Verified Member
Apr 28, 2012
7,735
49,856
58
Seahawk Nation
:rickroll:
Got an email for shipping notification of my Apollo package.....already!
That's what I call great customer service.......a prize package shipped on the same day it was won! You just know the same level of care would be given to orders
Sent with one hand, the other is busy vaping.
That's awesome! You should have it shortly, too, since it was mailed from right here in the USA! :)
 
Status
Not open for further replies.

Users who are viewing this thread