ARRIVED! Eleaf iStick TC40 40W 2600mah Temperature Control MOD Express Kit - BLK, Blue, Gray, Silver

Status
Not open for further replies.

dannoman

Unregistered Supplier
ECF Veteran
Oct 22, 2010
6,896
12,330
Sugar Land, Texas USA
eleaf_istick_TC40.png


eleaf_istick_TC40_1.png


eleaf_istick_TC40_2.png


eleaf_istick_TC40_3.png


eleaf_istick_TC40_4.png


eleaf_istick_TC40_5.png


eleaf_istick_TC40_6.png


eleaf istick TC40 40W 2600mah Temperature Control mod Express Kit
($46.95) $34.95

ONLY $33.20 after Newsletter VIP discount. You may also have any applicable Super VIP discounts available. THIS IS A SPECIAL INTRO PRICE!

This is the Express kit which includes an Ego adapter and USB charging cord. There is no tank or carto that comes with this kit. You can of course use this mod to vape anything you have that is eGo or 510 threaded (you would use VW mode for those) but this mod also specifically is approved for and has Temperature Control (TC) functions to that you can vape the tanks and cartos with TC Ni200 heads (you would use TC mode for these) for great performance, volumes of vapor and low energy consumption. We will have the Eleaf products of this genre and others up very very soon - just within a couple of days!

Eleaf iStick TC40W, from the iStick series battery, adopts newly introduced technical element of Temperature Control. It brings a unique vaping experience without any dry hit by adjusting temperature setting.

Despite the small size, it can reach 40W with the large built-in 2600mAh power capacity. Moreover, all stainless steel threads and elastic spring connector endows it with strong wear resistance. With temperature control function, less power and e-liquid consumption will also be evident and a PLUS.

A lot of different companies are producing temperature control mods, but until now, nobody has made temp control easy to use. The new eLeaf iStick TC40W is the little mod that finally makes temp control practical.

Just set your desired temperature and lock in the resistance being read by the mod on an unheated Ni atomizer, and vape. Easy. The set-and-forget functionality is easy to get to, as well. You don't have to five click and cycle through a bunch of confusing menus; just hold down the mode button sitting between the adjustment buttons and to switch between wattage and temp control mode.

Specifications:
  • Size: 36.2mm x 22.3mm x 77.3mm
  • Capacity: 2600mAh
  • Thread type: Stainless 510 thread
  • Variable Wattage: 1-40W
  • Temp Range: 100-315℃/200-600℉
  • Resistance range: 0.05-1ohm (TC mode; 0.15-3.5ohm (VW mode)
  • Clear OLED display
  • Accurate reading of resistance: The reading of resistance becomes more accurate with the number down to the second decimal point.
  • Stainless steel threads and spring connector
  • Micro USB Charging Port (this Express kit comes with your charging cord)
  • Temperature control requires the use of nickel coils.
  • This is the express kit and does not come with a tank. It does have an eGo adapter and 510 threading.

 
Status
Not open for further replies.

Users who are viewing this thread