Artery Nugget X Kit Review
I won this here on ECF from Heaven’s Gift…. Thank you @AlmightyEvan
https://www.heavengifts.com/product/Artery-Nugget-X-TC-Kit.html
I love this tiny mod right out of the box….. I was so surprised how it can really put out…. And all the features that are included in such a small mod is unbelievable…
It has 2000 mAh’s and lasted me just about all day… I refilled it 3 times on 1 charge….
The AT22 tank:
This is similar to most tanks out there… top fill with bottom airflow and bottom coil change. It puts out really well with the 4 holes in the coils…. The coils that come with it ate .30 Ohm to be run at 25~45 W The top cap is pretty easy to get a hold of to open….. I have been running it around 40 Watts and I am getting great flavor with lots of clouds...….….
The Nugget Mod:
This is such a small device I can hide it in my small hand…I have been carrying it in my shirt pocket most of the week….. It’s light and tiny….
Typical 5 clicks on/off, you will see a picture of a lock open & close….. 3 clicks to enter the menu…
The mod has a Wattage range of 5-50W & Voltage range: 0.5-8V
50 w output is enough for the tank that comes with it….
It has the fast charge…. It only take a couple hours to return to fully charged…..
It has lots of safety features……
The menu:
Power- PMGA -PMGB-PMGC from there you can adjust the seconds to design your own power curve…...
Temperature- TI, SS or TCR
Voltage- put is into Volt mode
ByPass- put is into Volt mode
Power off to turn it off instead of just sleep…. (it has a cure waving hand & good bye)
Exit to exit the menu…….
Pros:
Well made….The instruction manual really explains all this so it’s a good one….It’s small & light weight and easy to carry,.......Easy to open & fill…… Comes with a spare glass, coil & spare parts......fast charge…. 2000 mAh's.......
Cons:
The menu/screen is a little difficult to see especially when outside…..the screen size it .96
It comes with
Golden ratio size holding
0.96-inch large screen
User-friendly menu system
Easy top cap refill
New AL1-B coil for excellent flavor and vapor production
1.5A max fast charging
Various protections
Parameters:
Nugget X MOD
size: 36.6 x 23 x 58mm
Capacity: 2000mAh
Wattage range: 5-50W
Voltage range: 0.5-8V
Temp range: 200℉-600℉/100℃-315℃
Modes: VV/VW/TC(Ni/Ti/SS/TCR)/Bypass
Resistance range: 0.1-3ohm
Thread: 510
AT22 Tank
Size: 22 x 39mm (w/o thread)
Capacity: 2ml
Coil: 0.3ohm (25-45W)
Thread: 510
Size comparison with the Eleaf iStick iPower 5000....
I would recommend this for both New & veteran vapers........... An excellent tiny kit....
I won this here on ECF from Heaven’s Gift…. Thank you @AlmightyEvan
https://www.heavengifts.com/product/Artery-Nugget-X-TC-Kit.html
I love this tiny mod right out of the box….. I was so surprised how it can really put out…. And all the features that are included in such a small mod is unbelievable…
It has 2000 mAh’s and lasted me just about all day… I refilled it 3 times on 1 charge….
The AT22 tank:
This is similar to most tanks out there… top fill with bottom airflow and bottom coil change. It puts out really well with the 4 holes in the coils…. The coils that come with it ate .30 Ohm to be run at 25~45 W The top cap is pretty easy to get a hold of to open….. I have been running it around 40 Watts and I am getting great flavor with lots of clouds...….….
The Nugget Mod:
This is such a small device I can hide it in my small hand…I have been carrying it in my shirt pocket most of the week….. It’s light and tiny….
Typical 5 clicks on/off, you will see a picture of a lock open & close….. 3 clicks to enter the menu…
The mod has a Wattage range of 5-50W & Voltage range: 0.5-8V
50 w output is enough for the tank that comes with it….
It has the fast charge…. It only take a couple hours to return to fully charged…..
It has lots of safety features……
The menu:
Power- PMGA -PMGB-PMGC from there you can adjust the seconds to design your own power curve…...
Temperature- TI, SS or TCR
Voltage- put is into Volt mode
ByPass- put is into Volt mode
Power off to turn it off instead of just sleep…. (it has a cure waving hand & good bye)
Exit to exit the menu…….
Pros:
Well made….The instruction manual really explains all this so it’s a good one….It’s small & light weight and easy to carry,.......Easy to open & fill…… Comes with a spare glass, coil & spare parts......fast charge…. 2000 mAh's.......
Cons:
The menu/screen is a little difficult to see especially when outside…..the screen size it .96
It comes with
- 1x Nugget X MOD
- 1x AT22 Tank
- 1x Extra coil 0.3ohm
- 1x Extra glass tube
- 1x Pack of o-rings
- 1x USB cable
- 2x Manual one for the mod & one for the tank
Golden ratio size holding
0.96-inch large screen
User-friendly menu system
Easy top cap refill
New AL1-B coil for excellent flavor and vapor production
1.5A max fast charging
Various protections
Parameters:
Nugget X MOD
size: 36.6 x 23 x 58mm
Capacity: 2000mAh
Wattage range: 5-50W
Voltage range: 0.5-8V
Temp range: 200℉-600℉/100℃-315℃
Modes: VV/VW/TC(Ni/Ti/SS/TCR)/Bypass
Resistance range: 0.1-3ohm
Thread: 510
AT22 Tank
Size: 22 x 39mm (w/o thread)
Capacity: 2ml
Coil: 0.3ohm (25-45W)
Thread: 510
Size comparison with the Eleaf iStick iPower 5000....
I would recommend this for both New & veteran vapers........... An excellent tiny kit....
