Artery vapor Nugget box mod/50W TC/SMALLER than the COV Mini Volt!
- Thread starter XspidermanX
- Start date
- th_trl_thread_readers 0
- Status
No idea. Haha.
I believe it just came out. I saw it, when a reviewer mentioned it.
I believe it just came out. I saw it, when a reviewer mentioned it.
The best battery test I can give you is that it does survive an hour of my chain vaping at 550F, then about a half hour of on/off again ... so, roughly an hour and a half of Timmerz abuse...
Member since 2010... 3rd post... LOLOLOL
Just search youtube for artery nugget... im either the 1st or second result... here it is with the smallest RDA i could find on the shelf...
Attachments
you mention in your review that "you expect it to burn the cotton at 300° F." are you saying it does burn the cotton at that set temp (300°F)? cotton should not begin to burn until the 400°-420° F mark. i also noticed the wattage didn't fluctuate when when you fired the device, it just dropped sharply from your set wattage to a lower wattage at stayed right at that point. with my experiences, the wattage will fluctuate up and down a little to maintain my set temp. i'm asking these questions because i almost bought a mini volt today and i'm glad i didn't. i want to be sure TC works on the nugget before i purchase it. thanks.
I always look at Temperature Control and "Anti-Dry burn" differently. I kinda get more excited about a mod holding temp without going over so my juice and battery last a little longer than straight wattage mode (think, joyetechs marketing when the evic-vt came out)
I can tell you, ive closed off the juice flow and vaped and vaped until the vapor production was gone. My first reaction was too look at the mod and assume the battery was dead when i was like "duh, open the juice flow" it does fluctuate more at lower temp say <400f it will go down and move around a bit more...
The little tank is pretty cool, its all so comically tiny sitting next to anything else on the table.
lol, i had to edit that little 300 degree out... i was on an hour or so of sleep when i recorded that, im suprised i didnt say rediculously way off things...
I didn't even see this site, thanks!
Google came up with their supplier website, but you have to email them about sales and it seems there is a minimum Order requirement.
Hoping it's up by next week. Already have a mini volt, now looking to get a little/big brother in a SS finish
as soon as i heard about the nugget, i shot artery an email asking about buying the mod. that was 5 days ago and no response yet. so i'm hoping as well they get their usa site up and running soon. i need me some nugget in my life!I didn't even see this site, thanks!
Google came up with their supplier website, but you have to email them about sales and it seems there is a minimum Order requirement.
Hoping it's up by next week. Already have a mini volt, now looking to get a little/big brother in a SS finish
Here's another that I just received an e-mail on that looks decent.
Tesla Nano 60W TC
Colors: Black | Blue | Silver
Material: Zinc Alloy
Dimensions: 70 * 52 * 25mm
Battery: Dual Internal LiPo Batteries
Capacity: 3600mAh
Max Output Voltage: 8V
Max Output Current: 24.5A
Resistance Range: 0.1 – 3.5Ω (VW Mode) | 0.05 – 1.0Ω (TC Mode)
Temperature Range: 100 – 300℃/200 – 600℉
Tesla Nano 60W TC
Colors: Black | Blue | Silver
Material: Zinc Alloy
Dimensions: 70 * 52 * 25mm
Battery: Dual Internal LiPo Batteries
Capacity: 3600mAh
Max Output Voltage: 8V
Max Output Current: 24.5A
Resistance Range: 0.1 – 3.5Ω (VW Mode) | 0.05 – 1.0Ω (TC Mode)
Temperature Range: 100 – 300℃/200 – 600℉
Last edited:
@Marc411
Seen those. I have a tesla one already and enjoy it, I have that bookmarked for a buddy. For those with big hands, that looks like a good "mini" (top fire)
Seen those. I have a tesla one already and enjoy it, I have that bookmarked for a buddy. For those with big hands, that looks like a good "mini" (top fire)
- Status
Similar threads
