Hi guys, I've been using the asmodus snow wolf 200w (not sure which version, but there's no logo or anything on the side only a "snow wolf 200w" labelling. The snow wolf 200w is amazing and I've been using it for quite a while now , probably almost 5-6 months
So here's the issue, recently my mod has been acting weird , whenever I try to fire it,the "high temperature" warning pops out , it then goes off and on. At times it works normal, but most frequently the "high temperature" warning comes out upon firing (or just merely clicking the fire button) despite not being used at all prior to that. What I did was I took out my batteries and air dried the interior (thinking maybe it could be juice inside the mod since I had quite a few events of leakage) but then the real issue occured which I'm quite puzzled about right now.
This issue happened when I'm using temperature control (been using Temp control for many times now) , nickel wire at 0.13ohms firing at 250C 50w on my griffin RTA 22mm . I'm using the LG HE2 18650 LiMn 2500mAh Battery - 35 Amp (married at all times).
My battery reading was quite low when the issue occurred, while air drying the interior of the mod in an airconditioned room overnight (opening the battery cover NOT the screws), I charged my aforementioned batteries as well. The next day, when I placed everything together the battery reading was full, the "high temperature" warning came out once and didn't occur later. Everything was working fine initially, but after taking several puffs, the battery reading began dropping drastically within minutes until the mod reads "low battery" as I kept firing despite it being charged full the night before AND the "high temperature" warning kept showing whenever I tried to fire the mod (these two events happened simultaneously).
Could it be that it's the battery issue that's causing the mod to act weirdly (frequent showing of "high temperature" despite not being us prior to that) or could it be the mod issue ?
I tried placing the battery into another mod of my (a ktech topbox mini) and the battery reading was low as well despite being charged (close to empty)
Would appreciate your help very much as I really do love using the snow wolf 200w . Thank you !
So here's the issue, recently my mod has been acting weird , whenever I try to fire it,the "high temperature" warning pops out , it then goes off and on. At times it works normal, but most frequently the "high temperature" warning comes out upon firing (or just merely clicking the fire button) despite not being used at all prior to that. What I did was I took out my batteries and air dried the interior (thinking maybe it could be juice inside the mod since I had quite a few events of leakage) but then the real issue occured which I'm quite puzzled about right now.
This issue happened when I'm using temperature control (been using Temp control for many times now) , nickel wire at 0.13ohms firing at 250C 50w on my griffin RTA 22mm . I'm using the LG HE2 18650 LiMn 2500mAh Battery - 35 Amp (married at all times).
My battery reading was quite low when the issue occurred, while air drying the interior of the mod in an airconditioned room overnight (opening the battery cover NOT the screws), I charged my aforementioned batteries as well. The next day, when I placed everything together the battery reading was full, the "high temperature" warning came out once and didn't occur later. Everything was working fine initially, but after taking several puffs, the battery reading began dropping drastically within minutes until the mod reads "low battery" as I kept firing despite it being charged full the night before AND the "high temperature" warning kept showing whenever I tried to fire the mod (these two events happened simultaneously).
Could it be that it's the battery issue that's causing the mod to act weirdly (frequent showing of "high temperature" despite not being us prior to that) or could it be the mod issue ?
I tried placing the battery into another mod of my (a ktech topbox mini) and the battery reading was low as well despite being charged (close to empty)
Would appreciate your help very much as I really do love using the snow wolf 200w . Thank you !
