Aspire 1.0 ohm coil in Atlantis

[StrahmNoMore]

What's up forum? Just wondering if anyone has tried the new 1.0 ohm OCC coils from Aspire for the Atlantis2 yet? I was thinking of getting some for my Aspire V1 and just wondered what they were like and what type of wattage is ideal to give them.

 

[Thedudeabides870]

37-46w is what I have found to be ideal for me. Amounts to around 6.4v. To me they are better than the .3 which get too hot, chug juice too fast and drain battery, and better flavor than the .5.

 

[V8porism]

37-46w is what I have found to be ideal for me. Amounts to around 6.4v. To me they are better than the .3 which get too hot, chug juice too fast and drain battery, and better flavor than the .5.

Do you think the 1.0 ohm will fire on my istick 30?


Sent from my iPhone using Tapatalk

 

[Thedudeabides870]

I just lowered mine to 30w, it fires, just seems to take a little more time, however it's still hittin at 4.2v so I would say it's worth a try

 

[V8porism]

I just lowered mine to 30w, it fires, just seems to take a little more time, however it's still hittin at 4.2v so I would say it's worth a try

Thanks! My coils should arrive today. I'll post an update for istick 30 users.


Sent from my iPhone using Tapatalk

 

[Thedudeabides870]

Note, just put it on ipv2 mini, lowered it to 30w, fires at 5.6v, again still a slow cool draw, but it works. Each device is different, but most def a cooler vape

 

[V8porism]

Note, just put it on ipv2 mini, lowered it to 30w, fires at 5.6v, again still a slow cool draw, but it works. Each device is different, but most def a cooler vape

Thanks!


Sent from my iPhone using Tapatalk

 

[Juvecoop]

I just picked up these 1 ohm coils as well because I thought they would not kill my battery like the .3 or .5. Firing at 45watt it's showing 7.0v on my ipv mini2. Now is this not going to kill my battery quicker then the .3 or .5? And if so then what is the point of them?

 

[Thedudeabides870]

I just picked up these 1 ohm coils as well because I thought they would not kill my battery like the .3 or .5. Firing at 45watt it's showing 7.0v on my ipv mini2. Now is this not going to kill my battery quicker then the .3 or .5? And if so then what is the point of them?

I don't have a definitive answer as I didn't gauge my battery life, just for me the flavor is better

 

[Juvecoop]

I just got them today and saw the battery v difference from 3.5 on the .5ohm and then 7 on the 1ohm. I figured it would kill the battery quicker because it's using more Voltage

 

[Thedudeabides870]

I just got them today and saw the battery v difference from 3.5 on the .5ohm and then 7 on the 1ohm. I figured it would kill the battery quicker because it's using more Voltage

For what it's worth, I get better battery running 1.8-2ohms at 10v, opposed to running a lower ohm build at lower voltage but higher watts on eleaf 50w

 

[Juvecoop]

For what it's worth, I get better battery running 1.8-2ohms at 10v, opposed to running a lower ohm build at lower voltage but higher watts on eleaf 50w

Interesting! I haven't tested mine out either on a full charge, I'm guessing it could be possible. I guess we will have to wait and see. I just figured that would do the complete opposite, from what my understanding is of coils, etc.