Aspire Atlantis Batteries

[quiksilverpro]

Hey Guys,
Just wanted your opinion on the Aspire atlantis tank. All reviews seem extremely positive but i was wondering about batteries. I have a Kanger EVOD VV 1600maH, it's an ego-style battery but i was wondering if the atlantis would even fire on it, Or would i need to invest in a new battery like a Seigeli 100W. I can't find any information on the battery inside the EVOD or even the Max drain on it. So, any comments would be highly regarded.
Cheers

 

[Katmar]

Welcome to the forum!!

You could google it and find out. Just google which batteries are compatible. Hope this helps.

 

[djsvapour]

Your EVOD VV will not fire an Atlantis. Nor do you necessarily need 100w.

You need a mod that can fire 0.5 ohms upwards, 0.3 would be better really, just in case....

..a 50w box that starts at 0.3ohms seems a likely position to start from. iPV2? (don't know, just guessing...) NOT iPV mini though, that's 0.5ohms....

 

[DaniB]

djsvapour is right - the EVOD VV will not fire the Atlantis. You need something that will fire a 0.5 ohm coil. I agree that to be on the safe side, find a mod that will fire down to a 0.3 ohm coil and you should be fine.

 

[ProjektMayhem]

The iPV2 would be a good mod to use the Aspire Atlantis with. I have one and it fires down to .2 ohms. That should be more than enough for the Atlantis. I can fire up to 50 watts which I don't know if you would use all of that. But it's there if you need it. I'd highly recommend looking into rebuilding if you're able to do it. It's a lot more work but it's worth it.

 

[BrushyHillGuide]

The IPV2s would certainly work, especially if you want the smaller form factor. Personally, I like the Sigelei (I have both) because of the battery life and power. The size of the box is forgotten after you've used it a little while.

Forget about that EVOD battery if you want to get into dripping or rebuildables.


Sent from my iPhone using Tapatalk